نام: دکتر امین میراحمدی   رتبه علمی: دانشیار   تلفن: 50-77240540 داخلی:2916   فاکس: 77240488   پست الکترونیکی: mirahmadi @ iust.ac.ir   سایت:http://tech.iust.ac.ir   آدرس: دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، تهران، ایران

  دانشگاه های محل تحصیل

• دکترا، دانشگاه Berlin، آلمان
• فوق لیسانس، دانشگاه Berlin، آلمان
• لیسانس، دانشگاه صنعتی Dortmund، آلمان

  افتخارات

• Distance Controled Electrochemical Jet Machine, Patented in Iran, 2010
• Electrochemical Jet Turning Machine, Patented in Iran, 2008
• Hydro / Pneumatic Step Motors,Patented in Iran,2005
• Rapid Prototyping with Electrical Discharge, Patented in Iran, 2004
• Rapid Prototyping with Multi Plasma Arcs in Multi Point Simultaneous,Patented in Iran, 2005
• High Frequency Plasma Aided Rapid Prototyping, Patented in Iran, 2005
• Rotating Powder Feeding System in Plasma Aided Rapid Prototyping, Patented in Iran, 2004
• Rapid Prototyping with Helical Rotating Electrode, Patented in Iran, 2004
• Manufacturing Society prize for the best publication- Tarbit Modares University, Tehran, 2003
• Discovery of: Mathematical Fundament of: CAM, Mechatronic and Machine Design- Published in: Manufacturing Society Conference [ Existence Algebra]- Amir Kabir Universiy, Tehran, 2001
• Production of first iranian: Radio Frequency Controlled Locomotiv control system, IUST, Tehran, 1991
• Production of first iranian: Multi Locomotiv radio frequency controlled Master-Slave Robot control system, IUST, 1992
• Application of first iranian:Heavy Train Transport System [10 Locomotives, 2100 meter train length,Asiatic Record] , Golgohar Mine to Isfahan, 1993
• Kharazmi Festival Award for: Multi Locomotive Heavy Train Radio Frequency Control, 1993
• A New Method for Converting Analog to Digital Signal, Patented in Germany, 1979
• DREIECK-KENNLINIENERZEUGER
• Magnet Bearing with Fluid Compensator,Patented in Germany, 1979
• MAGNETLAGER MIT FLUIDEM KOMPENSATOR
• Self Calibrating Static Plate Flow Meter with Lineated Output, Patented in Germany, 1978
• VERFAHREN ZUR SELBSTTAETIGEN KALIBRIERUNG EINES STAUSCHEIBENDURCHFLUSSMESSERS
• Self Calibrating Magneto Dynamic Top Pan Balances,Patented in Germany, 1978
• VERFAHREN ZUR SELBSTTAETIGEN KALIBRIERUNG EINER WAAGE
• Non-linear Electro Force Converter for Flowmeter
• QUADRATISCHES KRAFT-STELLGLIED MIT DREHSYMMETRISCHER KENNLINIE

 تجربیات

• Design Engineer in DEMAG Company[Crane, Material Handling Devices,Heavy Tranport Vehicle],Germany,Dortmund
• Design Engineer in Hamburg Aero Plane Company [Airbus A300 Project], Germany, Hamburg
• Design Engineer in Sobansky Tools Company { Volkswagen [ V W ] Production Tools, Production Line Machines}-- Germany, West Berlin
• Scientific Ass. in Technical University of Berlin [Institute for Measurement & Control], Germany, West Berlin
• Organizer and Design Engineer in Samiran Company [Production of : Chemical Machines,Chemical Reactors], Iran, Tehran

  زمینه های تحقیقاتی

  http://tech.iust.ac.ir

  Production Technology

• Metal Powder Technology, Metal foam
• Hot and Cold Metal Forming
• Polymeric Part Production
• Composite Part Production
• CAM, CIM, CNC, FMS Systems
• Manufacturing Systems

  Production Automation

• Mechatronic,Measurement System, Robotics
• Artificial Intelligence
• Process Control
• Multi Vehicle Control

  Machine Design

• Parametric and Auto Design
• FEM and Optimization
• Magnetic Machine Elements
• Machine Tools Design

  Fluid Machinery

• Hydraulic and Pneumatic Production Machine
• Pumps and Compressors for Aggressive Media
• Heat Exchangers for Aggressive Media
• Rocket Engine , Gas Turbine
• Magnetic Suspended Leak less Gas Centrifuge

  Energy

• Solar Cooling and Water Recycling
• Heliostat Power Generation
• Plasma Fusion Power Generation
• Solid Oxid Fuel Cell

• Plasma Metal Powder Rapid Prototyping, Saedodin,2006, PhD
• Multi line 3D Object Measurement Scanner, Farshchian, 2005,MSc
• Pneumatic Step Motor Design and Testing, Khoshruzy, 2005, BSc
• 3D Object Scanner Software, Khadivy,Haj Mola Ali,2005,BSc
• Plasma Rapid Prototyping CNC Software Development, Meamary, 2004,MSc
• Titanium Hydride Metal Foam Production, Fahs, 2004,MSc
• Design and Production of a Ring Lapping Machine, Karimy, 2004,MSc
• Design and Testing of Plasma Rapid Prototyping, Shanjany, 2004,BSc
• FEM Stress Analysis in Metal Foam Parts, Ganjian, 2004,BSc
• Auto Design of Gas Turbine Axial Compressors, Sanago, 2004,BSc
• Auto Design of Multi Stage Gears, Jusefy, 2004,BSc
• Auto Design of Centrifugal Pumps, Warche-negad, 2004,BSc
• Test of Metal / Ceramic Powder Injection Technology, Shahrudy, 2003,BSc
• Test of Metal Foam Production Technology, Akbary,2003,BSc
• Production of Micro Part with Photo Chemical Machining, Nury, 2003,BSc
• Mechanical Design of Rapid Prototyping Machine, Alymadady, 2003,BSc
• Laser Diode 3D Line Scanner, Abasi, Sarmadi, 2003,MSc
• Design of a Motor Driven Hydraulic Chopper Valve, Eslamy, 2002,BSc
• Design of Ball Supported Gear, Khodaie, 2002, BSc
• Production of Metal / Ceramic Part with Plastic Injection Machine, Khosravi, 2001, MSc
• CNC Plasma Cutting Machine Software Development, Abasy, 2000, MSc
• Existence Algebra Application by Process Planning, Faghihy,2000, MSc
• Shrinkage Inhibition in Plastic Part with Gas Injection, Sarughy, 2000, MSc
• Design and Testing of an Electro Chemical Machining System, Soltany, 2001, BSc
• Process and Mechanical Design of Concentrator / Powder Production Line, Mohamady, 2000, BSc
• Process Calculation and Mechanical Design of Continues Fruit Powder Dryer, Delruz, 1999, BSc
• Mathematical Body Modeling with Existence Algebra, Zarkany, 1999, BSc
• Design of a Centrifugal Compressor for Vacuum Drying, Javaherian,1999, BSc
• Multi Metal Powder Alloys Extrusion, Shir-khorshidian, 1999, MSc
• Streamline Calculation with the FD-Method in Gas Turbine Blades, Bani Mostfa Arab,1999, MSc
• Thermal Conducting Calculation by Internal Cooled Motor Valve, Farivar, 1998, MSc
• Mechanical Design of a Sand Preparation Process Machine, Rezaiyan, 1998, BSc
• Mechanical Design of a Shaping Machine, Rezaiy,Moradian, 1998, BSc
• High Frequency Surface Hardening, Sharafian, Ardakany, 1997, BSc
• Coke less Gas Cupola Furnace Design, Moharer, 1997, MSc
• Magnet Hydro Dynamic Generator Design, Mohseny, 1996, MSc
• Infrasonic Data Transfer in Gas Pipe, Jusfy, 1996, MSc
• Industrial Gas Turbine Design, Shokry, 1996, MSc
• Automatic Mold Machine for Electrolytic Copper Refinery, Ahmadi, 1996, MSc
• Thermal Stress Analysis of Permanent Copper Die by Index Mold Machine, Jahantigh,1996, MSc
• Calculation, Design and Testing of Magnet Gears, Kargar,1996, BSc
• Mechanical Design of Train Steam Generator, Manshury, 1996, BSc
• Design and Control System Analysis of a Copy Milling Machine,Hoseynpur,1996, BSc
• Geared Plastic Die Design, Zokaiy,Karajy Fard,1996, BSc
• Magnet Hydro Dynamic Hg Pump, Mohseny,1996, BSc
• HAVAC -Design of Wagons, Fareghbal, 1995, BSc
• Design of an Automatic Part Anodizing Production Line, Firuzy, Yusefy, 1994, BSc
• Radio Frequency Controlled Steam Generator Wagon, Bakhtiyary,Tajeddiny,1992, BSc
• Gas Dynamic Calculation of a Transversal Excited CO2 Laser, Musavy, 1992, BSc
• Design and Testing of an Auto- Heliostat Collector for Power Generation, Fahimy, 1991, BSc
• Gyro Design and Testing for an Inertial Navigation System, Nematolahy, 1990, BSc
• Design of Molten Sulfur Centrifugal Pump for Sulfuric Acid Production, Zareiy, 1990, BSc
• Design and Hydro Dynamic Calculation of a Side Channel Pump, Mirzaiy, 1990, BSc
• Optimization of Gas Pressure Control Valve, Ahmadian, 1990, BSc
• Design and Calculation of a High Pressure Centrifugal Pump, Kabiry,1990, BSc
• Design and Testing of a Magnetic Suspension Model, Javady, 1990, BSc
• Design and Stress Calculation of a Hydraulic Press, Bateny, Rejaian, 1989, Bsc
• Design and Dynamical Analysis of a 4-Cylinder Car Engine, Mohebby, 1989, BSc
• Design and Gas Dynamic Calculation of Chlorine Gas Compressor,Mirfatahy, 1989, BSc
• Design of a Physical Vapor Deposition Unit, Rasuli, 1988, BSc
• Design and Testing of a Load Cell, Firuzy, 1987, BSc
• Capillary Gas Chromatography Software Development ,Hoseynpur,1990, BSc
• Design of a Silver Battery Production Line, Shojaiy,1990, BSc
• Design of a Cycloid Polygon Profile Grinding Machine,Kiany,1995, BSc
• Design of an Electro-Hydraulic Diesel Motor Governor, Kaviany, 1990, BSc

• Verschleiszfreie Magnet Lager-- Scientific Journal :Technische Berichte 6.Band Heft1-- Germany--Th. Gast, A. Mirahmadi, F.E.Wagner
• Microprozessor als Hilfsmittel bei einer Hochdruck-Waage --Journal : Technisches Messen ,Heft 6-- Germany-- A.Mirahmadi,F E.Wagner
• Automatishe Kalibrierung- Ein neues Verfahren zur Korrektur systematischer Fehler in Mesz sytemen mit linearer Kennlinie--Journal :Techniches Messen-- Germany--Th. Gast, A.Mirahmadi, F. E.Wagner
• Moeglichkeiten zur Gestalltung von Waegezellen--Journal : Waegen und Dosieren, Heft 5-- Germany--Th. Gast, A.Mirahmadi, F. E.Wagner
• Eine gravimetrische Meszeinrichtung fuer die Bestimmung von Stoffwerten unter Hoestdruck und hoher Temperatur--Journal : Chemie Ingenieur Technik,Volume 53 Issue 10 Pages 816-- Th. Gast, A. Mirahmadi, F. E. Wagner--1981
• Feasibility study of high frequency plasma aided rapid prototyping--Journal of machine tools and manufacture --A. Mirahmadi, S.Sadodin, J.shanjani--2006
• Temperature distribution analysis with Laplace transformation in Plasma Rapid Prototyping-- Scientific Journal of Aeronautic Engineering--A. Mirahmadi, S. Sadodin, J. Shanjani, 2006
• Production of a Lapping Machine--Scientific Journal of Society of Mechanical Engineering--A. Mirahmadi, Z. Karimi,R. Ghafuri --2007
• Low frequency Plasma Rapid prototyping--Scientific Journal of tabriz university--A. Mirahmadi, S. Sadodin, J. Shanjani-- 2007
• Numerical heat transfer modeling in coated powder-- Numerical Heat Transfer Journal -- A. Mirahmadi, S. Sadodin, J. Shanjani-- 2007

• Design and Manufacturing Electrochemical Jet Turning Machine and Investigation of its Effective Parameters -- Majlesi Journal of Mechanical Engineering Vol. 2/ No. 2/ February-2009 ISSN: 2008-1421 -- A. Mirahmadi, N. Sharafi
• Mathematical models for manufacturing using Vudjood algebra -- IMechE Vol. 223 Part B: J. Engineering Manufacture--A. Mirahmadi -- 2009
• Improvement of plasma-sprayed YSZ electrolytes for solid oxide fuel cells by alumina addition -- J. of Ionics -- A. Mirahmadi M. Pourmalek -- Springer-Verlag 2010
• A novel method for construction of a point coordinate measuring instrument using ultrasonic waves --IMEKO Journal of Measurement--A. Mirahmadi , A. Mansourzadeh -- 2010
• Mathemathical models of electrochemical jet machining, j. of Advanced Production Technology, A. Mirahmadi, N. Sharafi --2010

  مقالات کنفرانس

• Application of powder injection molding process to manufacturing of Ni-ZrO2 anodes in Solid Oxide Fuel Cells -- DOI:10.1051/epjconf/20100604002 E P J W e b o f C o n f e r e n c e s 6, 04002 (2010) published by EDP Sciences-- A. Mirahmadi M. Rezaee Saraji, 2010
• Fabrication of solid oxide fuel cell by thermal spray, A. Mirahmadi , P. Jahnshiri,12th EuCheMS International Conference
  on Chemistry and the Environment, 14-17 June 2009 Stockholm University, Stockholm, Sweden
• Fuel cell application by combined heat and power generation, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, K. Valphi, 2009
• Application of plasma-spray by solid oxide fuel cell, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, K. Valphi, 2009
• Fuel reforming by solid oxide fuel cell, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, M. Pourmalek, 2009
• Pyrolyse process by solid oxide electrolyte production, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, K. Valphi, 2009
• Solid oxide electrolyte production by Nano- powder Type Casing, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, P. Jahanshiri, 2009
• Polarisation influence by solid oxide fuel cell, Hydrogen and Fuel cell conference in IUST, Tehran, A. Mirahmadi, S. Khalili , 2009
• Manufacturing time optimization in additive and removal methods by ACS approch-- Rapid prototyping conference--Portugal-- A.Mirahmadi,S.Sadoddin,J.Shanjani--2006
• A new rapid prototyping method based on metal powder sintering--- International Conference on Advanced Research-- A. Mirahmadi, S. Saedodin , J. Shanjani--Portugal September 2007
• Super_saturation drowing-out coating of metal particles for usage in layered manufacturing processes--International Conference on Advanced Research-- A. Mirahmadi, S. Saedoddin, J. Shanjani -- Portugal, September 2007
• Multi Line Projection 3D Part Scanner-- International Conference of the Society of Manufacturing Engineers--Iran--A.Mirahmadi, A. Farshchian, H. Khadivi--2003
• Design and Measurement with 3D Laser Diode Line Scanner, 13th Annual (International) Conference on Mechanical Engineering--Iran-- A. Mirahmadi, M. Abasi, B. Sarmadi--2003
• High Frequancy Plasma Aided Rapid Prototyping , Tehran International Congress on Manufacturing Engineering (Ticme2005),A.Mirahmadi, S. Saedodin, Y.Shanjani
• Analysis of Conduction Heat Transfer in Spherical Powder Particles by Laplace Transform , 36th Annual Iranian Mathematics Conference Yazd, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani M. Seraj
• Tool Path Preparation in Selective Electrical Discharge Sintering , 13th Annual (International) Conference on Mechanical Engineering,A.Mirahmadi, S. Saedodin, R.Memari
• Analysis of Infiltration in Post Processing Stage of SEDS, 13th Annual (International) Conference on Mechanical Engineering,A.Mirahmadi, S. Saedodin, Y.Shanjani,
• Discretization of Heat Transfer PDE and Its Boundary Conditions in Sintering Stage of SEDS In Spherical Coordinates , 35th Annual Iranian Mathematics Conference Ahvaz, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani
• Heat Transfer Analysis in Sintering Stage of Plasma Aided Rapid Prototyping, 35th Annual Iranian Mathematics Conference Ahvaz, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani
• Calculation of Radiation Shape Factors in Plasma Aided Rapid Prototyping , 35th Annual Iranian Mathematics Conference Ahvaz, Iran , A.Mirahmadi, S.Saedodin, Y.Shanjani
• Metal Powder Rapid Prototyping with Selective Electrical Discharge Sintering (Seds) , 12th Annual (International) Conference on Mechanical Engineering,A.Mirahmadi, S.Saedodin, Y.Shanjani
• Magnet Hydro Dynamic Streamline Compution on a Molten Metal MHD- Pump , 8. International Conference of The Society of Mechanical Engineers ,A.Mirahmadi, Mohseni
• Fundmental of Production and Solidbody Modeling with Existence Algebra , International Conference of Manufacturing Engineers,A.Mirahmadi, A. Zarkani
• Infrasonic Communication and Information Transmission in the Train Brake Pipe , 3. International Conference of The Society Of Mechanical Engineers ,A.Mirahmadi, T. Jusefy
• Artificial Intelligence in the Multi Locomotive Control System , International Conference of Railways Organization,A.Mirahmadi, K.Mohmadi,
• Multi Locomotive Radio Control System , International Conference of Railways Organization,K.Mohmadi, A. Mirahmadi, M. Refan, J.Fariborz
• Breack Air Leackage in the Multi Locomotive Tracks , International Conference of Railways Organization,A.Mirahmadi
• Progress in the Development of Balances with Free Magnetic Suspension, IMECO Acta, Udssr, University of Moskau,Th. Gast. , A. Mirahmadi
• Fehler-Reduction bei Kompensierenden Waegezellen durch selbsttaetige Kalibrierung , IMECO Conference, Germany, University of Braunschweig,Th. Gast, A.Mirhmadi, F.E.Wagner
• Modelle und Strukturen in Mesz-Informationssystem , Verein Deutsche Ing. Conference,Germany / Frankfurt,Th,Gast A.Mirahmadi
• Flow Measurment in a Pulsating Flow by a New Automaticaly Controlled Static Plate Flowmeter, IMECO Conference on Flow Measurement of Fluid, Netherlands,Th. Gast, A. Mirahmadi
• Contribution to the Development of Freely Suspended Top Pan Balances, Thermochemica ACTA ,Netherlands,Amsterdam,Th. Gast , A. Mirahmadi, F. Wagner
• Fortschritte in der Meszwert-Uebetragung aus einer freischewebend gewogenen Probe, GEFTA / NSTA Symposium, Germany, University of Kiel,Th.Gast, A.Mirahmadi, F.E. Wagner
• Der Microprozessor als Hilfsmittel zur Loesung Mesz und steuerungs-technischer Aufgaben bei einer Hochdruck-Waage , VDI / VDE, Germany, Frankfurt,Th. Gast, A.Mirahmadi
• Some New Devices of Freely Suspended Top Pan Balances for Thermo-Gravimetric Measurements , European Symposium on Thermal Analysis, England, University of Sal Ford ,Th. Gast , A. Mirahmadi, F. Wagner

 آزمایشگاهای تحقیقاتی

 مرکز تحقیقات  فناوری

  http://tech.iust.ac.ir

  CIM Labor

• Software Development for Pruduction Machine
• Software Development for Measurement Systems
• Software Development for Material Handling Machine
• Educational and Training in Design Analysis

  Measurement Labor

• Educational and Training in Measurement Systems
• Measuring Instrument Development
• Mechatronic Hardware Development

  Machine Tools Control Labor

• Educational and Training in CNC Machine Development
• Rapid Prototyping Hardware / Software Development
• Robots Hardware / Software Development
• Manufacturing Process Development and Testing

  Nano and Composite Material Labor

• Educational and Training in Material Science
• Plastic and Composite Material Research
• Ceramic and Metal Particle Research

  Exprimental Workshop

• Educational and Training in Metal Cutting
• Educational and Training in CNC Machining
• Manufacturing Process Development and Testing
• Special Index Machine for Production Line
• Special Die Production Machines

  CNC Machine Labor

• Educational and Training in CNC Machining
• CNC Software Development

  Heat Treatment Labor

• Educational and Training in Metal Heat Treatment
• Educational and Training in Powder Technology and Sintering
• High Temperature Composite Material Research
• Heat Treatment System Development
• Hot Isostatic Pressing System Research
• Chemical / Physical Vapour Deposition System Research

  ارائه دروس

• Hydro Dynamic
• Machine Tools Design
• Mechatronic
• Automation
• Fluid Dynamic
• Fundamental of Machine Tools Design
• Fundamental of Measurement and Control
• Fundamental of Mechatronic
• Industrial Production Systems
• Lubrication
• Machine Elements
• Manufacturing Processes
• Measurements Systems
• Metal Cutting
• Plastic Processes
• Static