دانشکده مهندسی شیمی
طرح
دکتر علی اله وردی

دکتر علی اله وردی

 | تاریخ ارسال: 1392/10/23 | 

             رتبه دانشگاهی: استاد

             گرایش : صنایع شیمیایی معدنی

             تلفن دفتر : 73228742داخلی   3750

             تلفن دانشکده : 77240496

             دورنگار دانشکده : 77240495

google scholar

              Email :  Ali.Allahverdi[a]iust.ac.ir

مشخصات فردی

   تحصیلات دانشگاهی

  •  دکتری تخصصی مهندسی شیمی، انستیتو تکنولوژی شیمی پراگ، جمهوری چک، تاریخ اخذ: 1380
  •  کارشناسی ارشد مهندسی شیمی، دانشکده فنی، دانشگاه تهران، تاریخ اخذ: 1372
  •  کارشناسی مهندسی شیمی، دانشکده نفت آبادان (دانشگاه صنعت نفت)، تاریخ اخذ: 1369

  زمینه های تخصصی و تحقیقاتی

  • فناوری های فرآوری مواد و محصولات معدنی شامل نانو مواد معدنی

سوابق کاری:

  • 1394 تاکنون: رئیس مرکز تحقیقات سیمان، دانشگاه علم و صنعت ایران
  • 1388 تا کنون: استاد مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه علم وصنعت ایران
  • 1393 تا 1395: مدیر گروه صنایع شیمیایی معدنی، دانشکده مهندسی شیمی، دانشگاه علم وصنعت ایران
  • 1392 تا 1393: محقق میهمان، دانشگاه رایرسون، تورنتو، انتاریو، کانادا
  • 1388 تا 1393: دانشیار مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه علم وصنعت ایران
  • 1386 تا 1392: رئیس مرکز تحقیقات سیمان، دانشگاه علم و صنعت ایران
  • 1385 تا 1386: معاون آموزشی دانشکده مهندشی شیمی، دانشگاه علم و صنعت ایران
  • 1385 تا 1392: عضو شورای سیاستگزاری پژوهشی، شرکت احداث صنعت، وزارت صنعت، معدن و تجارت
  • 1384 تا 1386: معاون مرکز تحقیقات سیمان، دانشگاه علم و صنعت ایران
  • 1383 تا 1385: مدیر گروه صنایع شیمیایی معدنی، دانشکده مهندسی شیمی، دانشگاه علم وصنعت ایران
  • 1382 تا 1383: مدیر دفتر همکاریهای علمی و صنعتی با صنعت سیمان، دانشگاه علم و صنعت ایران
  • 1381 تا 1388: استادیار مهندسی شیمی، دانشگاه علم و صنعت ایران
  • 1372 تا 1376: مهندس سیمان، شرکت سیمان کرمان

سوابق آموزشی

  1. دروس دانشگاهی:
  • انتقال حرارت پیشرفته (دکتری و کارشناسی ارشد)
  • مهندسی فرآیند سیمان (دکتری و کارشناسی ارشد)
  • زبان انگلیسی تخصصی مهندی شیمی (دکتری و کارشناسی ارشد)
  •  فرآیندهای صنایع شیمیایی ساختمانی (کارشناسی)
  • شیمی و فیزیک سیمان (کارشناسی)
  • آزمایشگاه سیمان (کارشناسی)
  • فرآیندهای معدنی  (کارشناسی)
 
  1. کارگاه‍ها و دوره‍های آموزشی برای صنایع شیمیایی معدنی:
  • فناوری های کاهش اندازه (سنگ شکن ها و آسیاب ها)
  • فناوری های اختلاط و همگن سازی مواد اولیه (بسترهای اختلاط مواد و سیلوهای همگن ساز)
  • موازنه های جرمی و حرارتی فرآیندها
  • الکترفیلترها و فرآیند غبارگیری در صنعت
  • بهره برداری از کولرهای گریت
  • فناوری تولید سیمان پرتلند
  • راهبری کوره دوار سیمان
  • پارامترهای بهره برداری از سیستم پخت کلینکر
  • کنترل کیفی در فرآیند تولید سیمان پرتلند
  • طراحی و تنظیم مخلوط مواد خام سیمان
  • شیمی و فیزیک سیمان پرتلند
  • سیمان های خاص و جدید
 
سوابق پژوهشی:
  1. طرح‍های تحقیقاتی:
  1. تحقیق در خصوص شناسایی و ارزیابی چالش های صنعت سیمان، قرارداد تحقیقاتی با شرکت احداث صنعت، وزارت صنعت، معدن و تجارت، از 1391 تا 1392
  2. تدوین دانش فنی استفاده از ذرات نانو سیلیس در ترکیبات سنگ مصنوعی، سازمان گسترش و نوسازی صنایع ایران، طرح پژوهشی SBDC  ، از 1390 تا 1393
  3. تدوین دانش فنی تولید پانل های فوق سبک و عایق ساختمانی با استفاده از بتن RPC، قرارداد تحقیقاتی با وزارت صنعت، معدن و تجارت، از 1390 تا 1390
  4. عارضه یابی در حوزه تکنولوژی تولید و انرژی در شرکت سیمان اصفهان، قرارداد تحقیقاتی با شرکت عصر دانش اسپادانا، از 1390 تا 1391
  5. ارزیابی آلاینده های صنعت سیمان و ارائه راهکارهای :اهش آلودگی، قرارداد تحقیقاتی با مرکز تحقیقات راه، مسکن و شهرسازی، از 1388 تا 1390
  6. ارتقا فناوری تولید سنگ مصنوعی پایه سیمانی از طریق کاربرد ذرات سیلیس در اندازه میکرون در سیستم عمل آوری بخار تحت فشار به منظور افزایش خواص فیزیکی و کاربردی، قرارداد تحقیقاتی با دانشگاه صنایع و معادن، وزارت صنعت، معدن، و تجارت، از 1387 تا 1388
  7. ارائه خدمات مشاوره ای در امور تحقیقاتی و آموزشی مرتبط با تولید، کنترل کیفی، و تولید سیمان های خاص، قرارداد تحقیقاتی با شرکت سیمان اصفهان، از 1386 تا 1387
  8. ارائه خدمات مشاوره ای در امور تحقیقاتی و آموزشی مرتبط با تولید سیمان پرتلند سنگ آهکی در سیمان مازندران، قرارداد تحقیقاتی با شرکت سیمان مازندران، از 1385 تا 1387
  9. بررسی امکان استفاده از پس ماند کاتالیست RFCC در تولید سیمان های مخلوط، قرارداد تحقیقاتی با شرکت ملی مهندسی و ساختمان نفت ایران، از 1385 تا 1388
  10. بررسی امکان استفاده از کک نفتی در واحد چهارم کارخانه سیمان صوفیان، قرارداد تحقیقاتی با شرکت ملی مهندسی و ساختمان نفت ایران، دی ماه 1385
  11. بررسی امکان تولید سیمان ژئوپلیمری بر پایه پوزلان طبیعی تفتان، قرارداد تحقیقاتی با شرکت سیمان خاش، از 1384 تا 1385
  12. فعال سازی پوزلان طبیعی تفتان برای تولید سیمان بنایی ارزان قیمت، قرارداد تحقیقاتی با شرکت سیمان خاش، از 1384 تا 1385
  13. فعال سازی پوزلان طبیعی، قرارداد تحقیقاتی با معاونت پژوهشی دانشگاه علم و صنعت ایران، از 1384 تا 1385
  14. سیمان ژئوپلیمری پایه پوزلان طبیعی، قرارداد تحقیقاتی با معاونت پژوهشی دانشگاه علم و صنعت ایران، از 1383 تا 1384
  15. کاهش توقفات ناشی از گرفتگی در پیشگرمکن سیکلونی سیستم پخت سیمان، قرارداد تحقیقاتی با معاونت پژوهشی دانشگاه علم و صنعت ایران، از 1382 تا 1383
 
  1. افتخارات کسب‍شده :
  • پژوهشگر نمونه، وزارت صنعت، معدن و تجارت، 1391
  • پژوهش برتر، شرکت احداث صنعت، وزارت صنعت، معدن و تجارت، 1391
  • رتبه سوم پژوهش، دانشکده مهندسی شیمی، دانشگاه علم و صنعت ایران، 1391
  • رتبه اول تحقیق و توسعه کشور، وزارت صنعت، معدن و تجارت، 1389
 
  1. اختراعات ثبت‍شده:
  1. تولید میکرو/نانو سیلیس از پسماندهای صنعتی، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 84698، 1393
  2. ساخت بتن خودتراکم مقاوم در برابر آتش با استفاده از پرلیت، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 77800، 1391
  3. ساخت بتن خودتراکم با استفاده از فلسفه حداکثر چگالی و زئولیت، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 77800، 1391
  4.  سیمان مخلوط با مقاومت فشاری بالا با استفاده از پسماند کاتالیست RFCC، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 54416، 1387
  5. چسباننده معدنی پلیمری بر پایه پوزلان طبیعی، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 55831، 1387
  6. ساخت سیمان ارزان قیمت و سازگار با محیط زیست از مواد مکمل سیمانی، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 54067، 1387 
  7. تزیین سطوح سیمانی و بتنی با تکنیک استینینگ، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 42131، 1386 
  8. کاشی سیمانی مرکب دیواری، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 42639، 1386 
  9.  سیمان مرکب، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 36169، 1385
  10. سیمان تند گیر با مقاومت اولیه خیلی بالا، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 34819، 1385
  11. سیمان ارزان قیمت پایه پوزلان طبیعی، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 38274، 1385
  12. قطعات پیش ساخته رنگی از سیستم دوتایی فشرده پوزلایم، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 31788، 1384
  13. سیمان ژئوپلیمری پایه پوزلان طبیعی، اداره ثبت شرکت ها و مالکیت صنعتی، شماره 31559، 1384
  14. سیمان ضد اسید ژئوپلیمری پایه خاکستر بادی، اداره ثبت اختراعات جمهوری چک، شماره 291443، 1382
 
  1. کتاب‍‌های منتشرشده:
1 Methods to control efflorescence in alkali-activated cement-based materials (in English)
Book Chapter in Handbook of Alkali-activated Cements, Mortars and Concretes
Allahverdi A., Najafi Kani E., Khandaker M. Anwar Hossain and Mohamed Lachemi
To be published soon by Woodhead Publishing Ltd, Cambridge, UK
 
2 Evaluating the environmental pollutions of the cement industry and introducing the methods of emission control (in Persian)
Allahverdi A.
1st Edition, Publication Centre of Road, Housing and Urban Development Research Centre, Tehran, Iran, 2013.
 
3 Geopolymerisation of construction and demolition waste (in English),
Book Chapter in Handbook of recycled concrete & demolition waste: properties, processing, monitoring, health issues and applications,
Allahverdi A., Najafi Kani E.
1st Edition, Woodhead Publishing Ltd, Cambridge, UK, 2013.
 
4 Investigation on fire behavior of normal and self-compacting concretes and influencing parameters (in Persian)
Bakhtiyari S., Allahverdi A., Raeis Ghasemi M., Parhizkar T.
1st Edition, Publication Centre of Road, Housing and Urban Development Research Centre, Tehran, Iran, 2012.
 
5 Industrial Electrostatic Precipitators (in Persian)
Allahverdi A., Najafi Kani E., Jahed R.
1st Edition, Cement Research Centre, Publication Centre of Iran University of Science and Technology, Tehran, Iran, 2011.
 
 
  1. مقالات منتشرشده  در مجلات  ISIوISC :
1 Mahinroosta M., Allahverdi A., Dong P., Bassim N., Green template-free synthesis and characterization of mesoporous alumina as a high value-added product in aluminum black dross recycling strategy, Journal of Alloys and Compounds, 792, 161-169, 2019.
 
2 Naseri K., Allahverdi A., Investigating photocatalytic property of TiO2 nanorods fabricated hydrothermally at equal molar ratio of KOH and NaOH, International Journal of Applied Ceramic Technology, 16(2), 682-692, 2019.
 
3 Vafaei M., Allahverdi A., Dong P., Bassim N., Acid attack on geopolymer cement mortar based on waste-glass powder and calcium aluminate cement at mild concentration, Construction and Building Materials 193, 363–372, 2018.
 
4 Allahverdi A., Shahrbabaki M.N., Ghezelasheghi M., Mahinroosta M., Sulfate resistance of RFCC spent catalyst-blended Portland cement, Boletín de la Sociedad Española de Cerámica y Vidrio, Available online, 2018.
 
5 Allahverdi A., Maleki A., Mahinroosta M., Enhancement of hydraulic activity of slag‑blended Portland cement, Asian Journal of Civil Engineering, 19(8), 1009-1020, 2018.
 
6 Mahinroosta M., Allahverdi A., Production of nanostructured γ‑alumina from aluminum foundry tailing for catalytic applications, International Nano Letters, 8, 255–261, 2018.
 
7 Shafaghat J., Allahverdi A., The use of silica fume and replacement sand with Portland cement clinker to remove transition zone in concrete, Journal of Concrete Research, 11(3), 19-28, 2018.
 
8 Mahinroosta M., Allahverdi A., Hazardous aluminum dross characterization and recycling strategies: A critical review, Journal of Environmental Management, 223, 452–468, 2018.
 
9 Vafaei M., Allahverdi A., Acid-resistant geopolymer based on fly ash–calcium aluminate cement, Journal of Materials in Civil Engineering, 30(7), 04018143-1-11, 2018.
 
10 Allahverdi A., Akhondi M., Mahinroosta M., A composite cement of high magnesium sulphate resistance, Materiales de Construcción, 68(330), 1-11, 2018.
 
11 Allahverdi A., Azimi S.A., Alibabaie M., Development of multi-strength grade green lightweight reactive powder concrete using expanded polystyrene beads, Construction and Building Materials, 172, 457–467, 2018.
 
12 Mahinroosta M., Jomeh Farsangi Z., Allahverdi A., Shakoori Z., Hydrogels as intelligent materials: A brief review of synthesis, properties and applications, Materials Today Chemistry, 8, 1-14, 2018.
 
13 Mahinroosta M., Allahverdi A., Investigating the most important physical and mechanical properties of phosphorus slag cement, Ferdowsi Journal of Civil Engineering, 30(2), 61-75, 2018.
 
14 Allahverdi A., Maleki A., Mahinroosta M., Chemical activation of slag-blended Portland cement, Journal of Building Engineering, 18, 76-83, 2018.
 
15 Mahinroosta M., Allahverdi A., Enhanced alumina recovery from secondary aluminum dross for high purity nanostructured γ-alumina powder production: Kinetic study, Journal of Environmental Management, 212, 278-291, 2018.
 
16 Mahinroosta M., Allahverdi A., A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross, Journal of Cleaner Production, 179, 83-102, 2018.
 
17 Maghsoodloorad H., Khalili H., Allahverdi A., Alkali-activated phosphorous slag performance under different curing conditions: compressive strength, hydration products, and microstructure, Journal of Materials in Civil Engineering, 30(1), 04017253-1-12, 2018.
 
18 Tarameshloo A., Najafi Kani E., Allahverdi A., Performance evaluation of foaming agents in cellular concrete based on foamed alkali-activated slag, Canadian Journal of Civil Engineering, 44, 893-898, 2017.
 
19 Vafaei M., Allahverdi A., High strength geopolymer binder based on waste-glass powder,  Advanced Powder Technology, 28, 215-222, 2017.
 
20 Allahverdi A., Vafaei M., Maghsoodloorad H., Quality control and assessment of geopolymer cements based on reacted and free alkalis, Construction and Building Materials, 153, 274-283, 2017.
 
21 Vafaei M., Allahverdi A., Durability of geopolymer mortar based on waste-glass powder and calcium aluminate cement in acid solutions, Journal of Materials in Civil Engineering, 29(10), 04017196-1-9, 2017.
 
22 Maghsoodloorad H., Allahverdi A., Developing Low-Cost Activators for Alkali-Activated Phosphorus Slag-Based Binders, Journal of Materials in Civil Engineering, 29(6), 04017006-1 -10, 2017.
 
23 Allahverdi A., Mahinroosta M., Pilehvar Sh., A temperature-age model for prediction of compressive strength of chemically activated high phosphorus slag content cement, International Journal of Civil Engineering, 15(5), 839-847, 2017.
 
24 Allahverdi A., Najafi Kani E., Shaverdi B., Carbonation versus efflorescence in alkali-activated Blast furnace slag in relation with chemical composition of activator, International Journal of Civil Engineering, 15(4), 565-573, 2017.
 
25 Najafi Kani E., Allahverdi A., Provis J.L., Calorimetric study of geopolymer binders based on natural pozzolan, Journal of Thermal Analysis and Calorimetry, 127(3), 2181-2190, 2017.
 
26 Allahverdi A., Akhondi M., Mahinroosta M., Superior Sodium Sulfate Resistance of a Chemically Activated Phosphorus Slag–Based Composite Cement, Journal of Materials in Civil Engineering, 29(3), 04016231-1-9, 2016.
 
27 Najafi Kani E., Nejan M., Allahverdi A., Investigating the relationship between heat of hydration and physic-mechanical properties of calcium sulfate hemihydrate in the presence of additives, Iranian Journal of Materials Science and Engineering, 13(4), 61-70, 2016.
 
28 Maghsoodloorad H., Allahverdi A., Efflorescence Formation and Control in Alkali-Activated
Phosphorus Slag Cement, International Journal of Civil Engineering, 14, 425-438, 2016.
 
29 Ganji N., Allahverdi A., Naeimpoor F., Mahinroosta M., Photocatalytic effect of nano-TiO2 loaded cement on dye decolorization and Escherichia coli inactivation under UV irradiation, Research on Chemical Intermediates, 42(6), 5395-5412, 2016.
 
30 Allahverdi A., Mahinroosta M., Stochastic modeling of compressive strength of phosphorus slag content cement, Ceramics-Silikaty, 60(3), 169-178, 2016.
 
31 Vafaei M., Allahverdi A., Influence of calcium aluminate cement on geopolymerization of natural pozzolan, Construction & Building Materials, 114, 290-296, 2016.
 
32 Allahverdi A., Pilehvar Sh., Mahinroosta M., Influence of curing conditions on the mechanical and physical properties of chemically-activated phosphorous slag cement, Powder Technology, 288, 132-139, 2016.
 
33 Maghsoodloorad H., Allahverdi A., Alkali-activation kinetics of phosphorus slag cement using compressive strength data, Ceramics-Silikaty, 59(3), 250-260, 2015.
 
34 Allahverdi A., Hashemi H., Investigating the resistance of alkali-activated slag mortar exposed to magnesium sulphate attack, International Journal of Civil Engineering, Vol. 13, No. 4, Transaction A: Civil Engineering, 2015.
 
35 Yousefi A., Hejazi P., Allahverdi A., Toxicity of the cementitious coatings containing nano-TiO2 towards Thiobacillus thioparus bacterium (in Persian), Journal of Color Science and Technology, 101-111, 9, 2015.
 
36 Jafari V., Allahverdi A., Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant, Journal of Ultrafine Grained and Nanostructured Materials, 47(2), 105-112, 2014.
 
37 Jafari V., Allahverdi A., Synthesis and characterization of colloidal nanosilica via an ultrasound assisted route based on alkali leaching of silica fume, International Journal of Nanoscience and Nanotechnology, 10(3), 145-152, 2014.
 
38 Allahverdi A., Babasafari Z., Effectiveness of triethanolamine on grindability and properties of Portland cement in laboratory ball and vibrating disk mills, Ceramics-Silikaty, 58(2), 89-94, 2014.
 
39 Maghsoodloorad H., Khalili Amiri H., Allahverdi A., Lachemi M., Hossain K.M.N., Recycling phosphorus slag as a precursor for alklai-activated binder; impact of type and dosage of activator, Ceramics-Silikaty, 58(3), 227-236, 2014.
 
40 Allahverdi A., Mahinroosta M., A Model for Prediction of Compressive Strength of Chemically Activated High Phosphorous Slag Content Cement, International Journal of Civil Engineering, 12(4), 465-471, 2014.
 
41 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., A Case study on modifying the fire resistance of self-compacting concrete with expanded perlite aggregate and zeolite powder additive, Asian Journal of Civil Engineering, 15(3), 339-349, 2014.
 
42 Jafari V., Allahverdi A., Vafaei M., Ultrasound-assisted synthesis of colloidal nanosilica from silica fume: Effect of sonication time on the properties of product, Advanced Powder Technology, 25, 1571-1577, 2014.
 
43 Allahverdi A., Bahri Rasht Abadi M.M., Anwar Hossain K.M., Lachemi M., Resistance of chemically-activated high phosphorous slag content cement against freeze-thaw cycles, Cold Regions Science and Technology, 103, 107-114, 2014.
 
44 Allahverdi A., Ahmadnezhad S., Mechanical activation of silicomanganese slag and its influence on the properties of Portland slag cement, Journal of Powder Technology, 251, 41-51, 2014.
 
45 Allahverdi A., Bahri Rashtabadi M.M., Resistance of chemically activated high phosphorus slag content cement against frost-salt attack, Cold Regions Science and Technology, 98, 18-25, 2014.
 
46 Yousefi A., Hejazi P., Allahverdi A., Evaluation of effective strategies for cultivation of Acidithiobacillus thiooxidans as cement-degrading bacteria, Iranian journal of Chemical Engineering, 10(2), 55-66, 2013.
 
47 Yousefi A., Allahverdi A., Hejazi P., Accelerated biodegradation of cured cement paste by Thiobacillus species under simulation conditions, Journal of International Biodeterioration and Biodegradation, 86, 317-326, 2014.
 
48 Allahverdi A., Mahinroosta M., Mechanical activation of chemically activated high phosphorus slag content cement, Journal of Powder Technology, 245, 182-188, 2013.
 
49 Allahverdi A., Mahdavan M., Durability performance of RFCC spent catalyst-blended Portland cement paste exposed to sea water attack, Ceramics-Silikaty, 57(4), 305-312, 2013.
 
50 Allahverdi A., Najafi Kani E., Soltani Sh., An experimental investigation on improving the medium and late-age compressive strength of class G oil well cement, Journal of Petroleum Science and Technology, 3(1), 1-7, 2013.
 
51 Yousefi A., Allahverdi A., Hejazi P., Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes, Construction and Building Materials, Construction and Building Materials, 41, 224-230, 2013.
 
52 Ashrafizadeh S.A., Amidpour M., Allahverdi A., Exergetic and environmental performance improvement in cement production process by driving force distribution, Korean Journal of Chemical Engineering, 29(5), 606-613, 2012.
 
53 Allahverdi A., Ehsani M., Janpour H., Ahmadi Sh., The effect of nanosilica on mechanical, thermal and morphological properties of epoxy coating, Progress in Organic Coatings, Vol. 75, 543-548, 2012.
 
54 Najafi Kani E., Allahverdi A., Provis J.L., Efflorescence control in geopolymer binder based on natural pozzolan, Cement and Concrete Composites, Vol. 34, No. 1, 25-33, 2012.
 
55 Salem Sh., Jazayeri S.H., Bondioli F., Allahverdi A., Shirvani M., Investigating the effects of pH on production of cobalt-aluminate nano-particles by combustion synthesis method, (in Persian), Journal of Color Science and Technology, Vol. 5, No. 4, 345-345, 2012.
 
56 Salem Sh., Jazayeri S.H., Bondioli F., Allahverdi A., Shirvani M., Effect of synthesis condition of cobalt-aluminate powder on melting behavior of transparent glaze, Journal of Ceramic Science and Technology, 2, 169-178, 2011.
 
57 Salem Sh., Jazayeri S.H., Allahverdi A., Shirvani M., Bondioli F., Ferrari A.M., CoAl2O4 nano-pigment obtained by combustion synthesis, International Journal of Applied Ceramic Technology, Vol. 29, 1-11, 2011.
 
58 Allahverdi A., Najafi Kani E., Fazlinejhad M., Investigating the linear expansion, set and strength behaviors of the binary mixture; Portland cement clinker-gypsum, Iranian Journal of Materials Science and Engineering, Vol. 8, No. 4, 1-11, 2011.
 
59 Najafi Kani E., Allahverdi A., Investigating shrinkage changes of natural pozzolan based geopolymer cement paste, Iranian Journal of Materials Science and Engineering, Vol. 8, No. 3, 1-11, 2011.
 
60 Salem Sh., Jazayeri S.H., Bondioli F., Allahverdi A., Shirvani M., Evaluation of two different methods to synthesize cobalt-aluminate spinel, Journal of Ceramic Processing Research, Vol. 12, No. 6, 677-681, 2011.
 
61 Allahverdi A., Vakilinia Sh., Gharabeglu P., Effects of RFCC spent catalyst on some physic-chemical properties of Portland cement paste, Ceramics-Silikaty, Vol. 55, No. 2, 161-168, 2011.
 
62 Allahverdi A., Najafi Kani E., Abolhasani S., Binary mixture of natural pozzolan/gypsum activated with Portland cement clinker and chemical activators, Cement, Wapno, Beton, No. 3, 139-147, 2011.
 
63 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., Ramezanianpour A.A., Parhizkar T., Zarrabi B.A., Mix design, compressive strength and resistance to elevated temperature (500 °C) of self-compacting concretes containing limestone and quartz filler, International Journal of Civil Engineering, Vol. 9, No. 3, 215-222, 2011.
 
64 Allahverdi A., Najafi Kani E., Yazdanipour M., Effects of blast-furnace slag on natural pozzolan based geopolymer cement, Ceramics-Silikáty, 55, No. 1, 68-78, 2011.
 
65 Salem Sh., Jazayeri S.H., Bondioli F., Allahverdi A., Shirvani M., Characterizing thermal behaviour of ceramic glaze containing nano-sized cobalt-aluminate pigment by hot stage microscopy, Thermochimica Acta, 521, 191-196, 2011.  
 
66 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., Zarrabi B.A., Parhizkar T., Self-compacting concrete containing different powders at elevated temperatures-mechanical properties and changes in phase composition of the paste, Thermochimica Acta, 514, 74-81, 2011.
 
67 Allahverdi A., Shaverdi B., Najafi Kani E., Influence of sodium oxide on properties of fresh and hardened paste of alkali-activated blast-furnace slag, International Journal of Civil Engineering, Vol. 8, No. 4, 304-314, 2010.
 
68 Najafi Kani E., Allahverdi A., Fast set and high early strength cement from limestone, Natural Pozzolan, and Fluorite, International Journal of Civil Engineering, Vol. 8, No. 4, 362-369, 2010.
 
69 Allahverdi A., Salem Sh., Simultaneous influence of microsilica and limestone powder on properties of Portland cement paste, Ceramics-Silikaty, Vol. 54, No. 1, 65-71, 2010.
 
70 Jazayeri S.H., Bondioli F., Salem Sh., Allahverdi A., Shirvani M., and Maria Ferrari A., Effect of pH and molar ratio of fuel to nitrate and calcination temperature on the glycine-nitrate synthesis of nano-CoAl2O4, Advances in Science and Technology, 68, 176-181, 2010.
 
71 Allahverdi A., Kianpur K., Moghbeli M.R., Effect of polyvinyl alcohol on flexural strength and some important physical properties of Portland cement paste, Iranian Journal of Materials Science and Engineering, Vol. 7, No. 1, 1-6, 2010.
 
72 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., The influence of permanent expanded polystyrene formwork on fire resistance of self-compacting and normal vibrated concretes, Asian Journal of Civil Engineering, Vol. 12. No. 3, 353-374, 2010.
 
73 Allahverdi A., Najafi Kani E., Construction wastes as raw material for geopolymer binder, International Journal of Civil Engineering, Vol. 7, No. 3, 154-160, 2009.
 
74 Allahverdi A., Rahmani A., Chemical activation of natural pozzolan with a solid compound activator, Cement, Wapno, Beton, Vol. XIV/LXXVI, No. 4, 205-213, 2009.
 
75 Najafi Kani E., Allahverdi A., Effects of chemical composition on basic engineering properties of inorganic polymeric binder based on natural pozzolan, Journal of Cermics-Silikaty, Vol. 53, No. 3, 195-204, 2009.
 
76 Najafi Kani E., Allahverdi A., Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan, Journal of Materials Science, Vol. 44, No. 12, 3088-3097, 2009.
 
77 Najafi Kani E., Allahverdi A., Application of FTIR spectroscopy technique in characterizing molecular structure of natural pozzolan-based geoploymer cement, Iranian Journal of Materials Science and Engineering, Vol. 6, No. 2, 1-10, 2009.
 
78 Allahverdi A., Najafi Kani E., Esmaeilpoor S., Effects of silica modulus and alkali concentration on activation of blast-furnace slag, Iranian Journal of Materials Science and Engineering, Vol. 5, No. 2, 32-35, 2008.
 
79 Allahverdi A., Mehrpour K., Najafi Kani E., Investigating the possibility of utilizing pumice-type natural pozzolan in production of geopolymer cement, Ceramics-Silikáty, 52, No. 1, 16-23, 2008.
 
80 Allahverdi A., Salem Sh., Studies on main properties of ternary blended cement with limestone powder and microsilica, Iranian Journal of Chemical Engineering, Vol. 4, No. 1 (Winter), 3-13, 2007.
 
81 Allahverdi A., Mehrpour K., Najafi Kani E., Taftan pozzolan-based geopolymer cement, International Journal of Engineering Science, Iran University of Science and Technology, Vol. 19, No. 3, 1-5, 2008.
 
82 Allahverdi A., Mehrpour K., Najafi Kani E., Geopolymer cement from Sirjan pozzolan, Amirkabir Journal of Science and Technology, Vol. 19, No. 68-D(CPT), 55-59, 2008.
 
83 Allahverdi A., Ghorbani J., Chemical activation and set acceleration of lime-natural pozzolan cement, Ceramics-Silikáty, Vol. 50, No. 4, 193-199, 2006.
 
84 Allahverdi A., Škvára F., Sulfuric acid attack on hardened paste of geopolymeric cements; Part II: Corrosion mechanism at mild and relatively low concentrations, Ceramics-Silikáty, Vol. 50, No. 1, 1-4, 2006.
 
85 Allahverdi A., Škvára F., Sulfuric acid attack on hardened paste of geopolymeric cements; Part I: Mechnism of corrosion at relatively high concentrations, Ceramics-Silikáty, Vol. 49, No. 4, 225-229, 2005.
 
86 Allahverdi A., Influence of returned dust of cement kiln on blockages in cyclone preheater, International Journal of Engineering Sciences, Vol. 15, No. 4, 19-27, 2004.
 
87 Allahverdi A., Škvára F., Nitric acid attack on hardened paste of geopolymeric cements, Part I, Ceramics-Silikáty, Vol. 45, No. 3, 81-88, 2001.
 
88 Allahverdi A., Škvára F., Nitric acid attack on hardened paste of geopolymeric cements, Part II, Ceramics-Silikáty, Vol. 45, No. 4, 143-149, 2001.
 
89 Allahverdi A., Škvára F., Acidic corrosion of hydrated cement based materials, Part 1; Mechanism of the phenomenon, Ceramics-Silikáty, Vol. 44, No. 3, 114-120, 2000.
 
90 Allahverdi A., Škvára F., Acidic corrosion of hydrated cement based materials, Part 2; Kinetics of the phenomenon and mathematical models, Ceramics-Silikáty, Vol. 44, No. 4, 121-160, 2000.
 
 
 
  1. مقالات ارائه‌شده در کنفرانس‌های داخلی و خارجی :
1 Mohammadi M., Allahverdi A., Stability enhancement of titanium dioxide nano-tube array on titanium substrate for hydrogen production through photocatalytic water splitting, The16th Iranian National Congress of Chemical Engineering (IChEC2019), Amirkabir University of Technology, Tehran, Iran, Jan 22-24, 2019.
 
2 Mahinroosta M., Allahverdi A., Karimi Z., High purity amorphous alumina nanoparticles from hazardous aluminum dross, The16th Iranian National Congress of Chemical Engineering (IChEC2019), Amirkabir University of Technology, Tehran, Iran, Jan 22-24, 2019.
 
3 Karimi Z., Allahverdi A., Mahinroosta M., Utilization of red mud for extraction of alumina nanopowder, The16th Iranian National Congress of Chemical Engineering (IChEC2019), Amirkabir University of Technology, Tehran, Iran, Jan 22-24, 2019.
 
4 Bazban-Shotorbani Z., Allahverdi A., Mahinroosta M., Efficient adsorption of Pb2+ onto modified aluminum black dross, The16th Iranian National Congress of Chemical Engineering (IChEC2019), Amirkabir University of Technology, Tehran, Iran, Jan 22-24, 2019.
 
5 Abdollahi M., Allahverdi A., Mahinroosta M., Precipitation of boehmite from aluminum chloride solution: effect of pH and temperature, The16th Iranian National Congress of Chemical Engineering (IChEC2019), Amirkabir University of Technology, Tehran, Iran, Jan 22-24, 2019.
 
6 Dong P., Allahverdi A., Andrei C.M., Bassim N.D., Application of liquid cell-TEM in hydration reactions of nano Portland cement, Microscopy & Microanalysis Meeting, Baltimore, USA, August 5-9, 2018.
 
7 Karimi Z., Allahverdi A., Mahinroosta M., Treatment of red mud using mineral acids for metals recovery, 5th Iran International Aluminum Conference, Tehran, Iran, April 24-25, 2018.
 
8 Mahinroosta M., Allahverdi A., Synthesis and characterization of metal hydroxide nano-hybrid via aluminum salt slag recycling method, 5th Iran International Aluminum Conference, Tehran, Iran, April 24-25, 2018.
 
9 Mahinroosta M., Allahverdi A., Extraction and characterization of activated-alumina nanopowder from hazardous dross waste for catalytic applications, 1st Iran Congress on Industrial Applications of Advanced Materials and Manufacturing, Iran University of Science and Technology, Tehran, Iran, 24-26 May 2017.
 
10 Mahinroosta M., Allahverdi A., Fabrication of nano-crystalline aluminum hydroxide gel from secondary aluminum dross, International Conference/Workshop of Inter-Islamic Network on Nanotechnology and Nanomedicine, Materials and Energy Research Center, Meshkindasht, Alborz, Iran, 2-3 May 2017.
 
11 Nateghi M., Allahverdi A., Synthesis of mesoporous silica functionalized with amine groups for adsorption of ketones; A case study for adsorption of acetone, (in Persian) 1st National Conference on Gas and Petrochemical Processes, Bojnord University, Bojnord, North Khorasan, Iran, 3-4 May 2017.
 
12 Farahmand M., Allahverdi A., Enhancing hydrogen production rate in photoelectrocatalytic water splitting by doping titanium dioxide nanotube array with silver nitrate using chemical bath deposition method, (in Persian) 4th National Conference on Hydrogen and Fuel Cell, University of Tehran, Tehran, 9-10 May 2017.
 
13 Mahinroosta M., Allahverdi A., Industrial solid wastes as promising low-cost adsorbents  for removal of environmental pollutants, (in Persian) 3rd International Conference on New Research Achievements in Chemistry and Chemical Engineering, Tehran, September 23rd, 2017.
 
14 Vafaei M., Allahverdi A., Geopolymer cement from waste glass; A suitable solution for recovering part of municipal wastes, (in Persian) 3rd International Conference on New Research Achievements in Chemistry and Chemical Engineering, Tehran, September 23rd, 2017.
 
15 Allahverdi A., Katayoon N., Synthesis and evaluation of sodium titanate-based nano-photocatalyst, (in Persian) 2nd Conference of Engineering and Green Technologies for Sustainable Future, Amirkabir University, Tehran, 17-18 January 2017.
 
16 Allahverdi A., Katayoon N., Synthesis of sodium titanate-based nano-adsorbent and effect of calcination on the adsorption of organic pollutants in dyeing wastewaters, (in Persian) 2nd Conference of Engineering and Green Technologies for Sustainable Future, Amirkabir University, Tehran, 17-18 January 2017.
 
17 Najafi Kani E., Najan M., Allahverdi A., Measurement of hydration heat of different hemi-hydrate calcium sulfate and its relation to physical and mechanical properties, The 3rd National Gypsum Conference – Gypsum Research Group, Semnan University, October 7th, 2015.
 
18 Hatami L., Allahverdi A., Application of Roller Press Coupled with Ball Mill in Cement Industry, 1st National Conference on Civil Engineering, Urbanism & Sustainable Management, Tehran, Iran, February 5th, 2015.
 
19 Jafari V., Allahverdi A., Vafaei M., Preparation of colloidal silica nanoparticles from silica fume using ultrasonication, 5th International Conference on Nanostructures (ICNS5), Kish Island, Iran, 6-9 March 2014.
 
20 Jafari V., Allahverdi A., Synthesis and characterization of nanosilica from silica fume by precipitation method, 5th International Congress on Nanoscience & Nanotechnology (ICNN2014), Tehran, Iran, 22-24 October 2014.
 
21 Najafi Kani E., Tarameshloo A., Allahverdi A., Use of hydrogen peroxide in production of light weight products based on alkali-activated slag, 3rd  International Conference on Cement Industry, Energy and Environment, Tehran, Iran, 22-24 November, 2014.
 
22 Yousefi A., Allahverdi A., Hejazi P., Application of photocatalytic properties of nano-TiO2 particles in protecting cement structures against biological deteriorations (in Persian), 13th National Student Conference on Nano-technology, Tehran, Iran, May 2013.
 
23 Gholinezhad F., Moghbeli M., Allahvedi A., Using of styrene butyl acrylate-meth acrylic/Nanoclay composite latex for increasing flexural strength of cement paste and preventing slump loss, 2nd International Conference on Cement Industry, Energy and Environment, Tehran, Iran, 24-25 November, 2013.
 
24 Majdabadi Sh., Allahverdi A., Eghbali R., A review on alternative fuels in cement industry, 2nd International Conference on Cement Industry, Energy and Environment, Tehran, Iran, 24-25 November, 2013.
 
25 Yousefi A., Allahverdi A., Hejazi P., Studying the durability of concrete structures in the presence of Acidithiobacillus Thiooxidans bacterium, 4th International Conference on Concrete and Development, Tehran, Iran, April 29- May 1, 2013.
 
26 Yousefi A., Allahverdi A., Hejazi P., Use of photocatalytic properties of Nano-TiO2 particles in controlling the environmental pollutions of cement structures(in Persian), The 2nd National Conference on New Technologies in Controlling Environmental Pollutions, Sharif University, Tehran, Iran, May 2013.
 
27 Yousefi A., Allahverdi A., Hejazi P., Application of photocatalytic properties of nano-TiO2 particles in controlling the environmental microbial pollutions (in Persian), The 2nd National Conference on New Technologies in Controlling Environmental Pollutions, Sharif University, Tehran, Iran, May 2013.
 
28 Yousefi A., Allahverdi A., Hejazi P., Application of a new technology based on photocatalytic properties of nano-TiO2 particles in protecting concrete structures against biodegradation (in Persian), The 13th National Student Conference on Nano-technologies, Tehran, Iran, May 2013.
 
29 Yavari Nia M., Saeedi M., Allahverdi A., Management of removed sediments of Anzali wetland for reuse, 2nd International Conference on Waste Management, Recycling and Biomass, Tehran, Iran November, 2012.
 
30 Allahverdi A., Khalili Amiri H., Maghsoodloorad H., Characterization of alkali-activated phosphorus slag as an inorganic binder, The 14th National Chemical Engineering Congress, Sharif University, Tehran, Iran, 16-18 October 2012.
 
31 Ganji N., Allahverdi A., Investigating the influence of superplasticizers on photocatalytic properties of cements containing nano-TiO2 particles (in Persian), The 14th National Chemical Engineering Congress, Sharif University, Tehran, Iran, 16-18 October 2012.
 
32 Nazemi Hasanalideh F., Allahverdi A., Pishehvar M., Investigating the simultaneous influence of nano-silica and ultrasonic waves on compressive strength enhancement of ultra-high strength mortar (in Persian), The 14th National Chemical Engineering Congress, Sharif University, Tehran, Iran, 16-18 October 2012.
 
33 Pishehvar M., Allahverdi A., Nazemi Hasanalideh F., Development of ultra-high strength mortar using combined techniques of strength enhancement (in Persian), The 14th National Chemical Engineering Congress, Sharif University, Tehran, Iran, 16-18 October 2012.
 
34 Ganji N., Allahverdi A., Investigating the ability of cement-based coatings containing nano-TiO2 particles in decomposing organic colors (in Persian), The 14th National Chemical Engineering Congress, Sharif University, Tehran, Iran, 16-18 October 2012.
 
35 Allahverdi A., Babasafari Z., Investigating the grinding-effects of gypsum in cement mills (in Persian), The 2nd National Gypsum Conference, Semnan University, Semnan, Iran, May 2012.
 
36 Allahverdi A., Seyedi M.M., Enhancement of cementing properties of fly ash-Portland cement blend with chemical activators and quality improvers, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
37 Allahverdi A., Pilehvar Sh., Effect of curing conditions on compressive strength of activated phosphorous slag, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
38 Allahverdi A., Maleki A., Enhancement of hydraulic activity of Portland cement-slag paste by non-chlorine chemical activators and quality improvers, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
39 Allahverdi A., Mahinroosta M., Effects of mechanical activation on compressive strength of activated phosphorous slag, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
40 Allahverdi A., Pourzadeh Fallah Sh., Activation of phosphorous slag by chemical activators and quality improvers, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
41 Allahverdi A., Babasafari Z., Investigating the effects of triethanolamine on clinker grindability with and without gypsum, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
42 Allahverdi A., Babasafari Z., Comparing the effects of various grinding aids in vibrating disk and ball mills, The 7th International Chemical Engineering Congress and Exhibition (IChEC 2011), Kish, Iran, 21-24 November, 2011.
 
43 Allahverdi A., Seyedi M.M., Habert G., Enhancement of cementing properties of fly ash-Portland cement blend with a solid compound activator, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
44 Allahverdi A., Saffari M., Chemical activation of phosphorous slag with a solid compound activator, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
45 Allahverdi A., Saffari M., Imparting cementing properties to natural pozzolan with a solid compound chemical activator, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
46 Allahverdi A., Hashemi H., Sodium sulphate attack on alkali-activated slag mortar, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
47 Allahverdi A., Hashemi H., Magnesium sulphate attack on alkali-activated slag mortar, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
48 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., Influence of permanent expanded polystyrene formwork on fire resistance of self-compacting concretes, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
49 Allahverdi A., Ahmadnezhad S., Silicomanganese slag as a supplementary cementing material, 4th International Conference of Non-traditional Cement and Concretes (NTCC 2011), Brno, Czech Republic, 27-30 June, 2011.
 
50 Allahverdi A., Mahinroosta M., Pilehvar Sh., A review on modern processing technologies for energy efficiency improvements in cement industry (in Persian), Proceedings of the 1st International Conference on Emerging Trends in Energy Conservation – ETEC, Tehran, Iran, 20-21 November, 2011.
 
51 Allahverdi A., Babasafari Z., Comparing the grinding aid effects of ethanolamine and polyethylene glycols in cement industry (in Persian), Proceedings of the 1st International Conference on Emerging Trends in Energy Conservation – ETEC, Tehran, Iran, 20-21 November, 2011.
 
52 Allahverdi A., Babasafari Z., Investigating the effects of ethanolamines and polyglycols as grinding aids in cement mills (in Persian), 1st Iranian Congress on Modern Chemistry, Shiraz, Iran, 4-5 May, 2011.
 
53 Allahverdi A., Babasafari Z., Investigating the effects of glass flakes on polymer coatings (in Persian), 1st Iranian Congress on Modern Chemistry, Shiraz, Iran, 4-5 May, 2011.
 
54 Jazayeri S.H., Salem Sh., Bondioli F., Allahverdi A., Shirvani M., Comparison of microwave-hydrothermal and combustion methods to synthesize spinel "cobalt-aluminates", 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
55 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., Parhizkar T., Ramezanianpour A.A., Behavior of self-compacting concrete containing quartz and limestone filler at elevated temperature of 500 ºC, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
56 Bakhtiyari S., Allahverdi A., Rais-Ghasemi M., Parhizkar T., Ramezanianpour A.A., Mix design and compressive strength of self-compacting concretes containing limestone and quartz fillers, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
57 Allahverdi A., Zinsaz S., Resistance of activated natural pozzolan binder against combined effects of a de-icing chemical and frost, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
58 Allahverdi A., Zinsaz S., Resistance of activated natural pozzolan binder against freezing-thawing cycles, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
59 Allahverdi A., Saffari M., Investigating the effects of a compound activator on granulated blast-furnace slag, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
60 Allahverdi A., Saffari M., Chemical activation of some supplementary cementing materials for imparting set and strength properties, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
61 Allahverdi A., Hedayat A., Investigating the sulfate resistance of activated natural pozzolan in sodium sulfate solution, 13th Iranian National Chemical Engineering Congress & 1st International Regional Chemical and Petroleum Engineering (IChEC 13), Kermanshah, Iran, 25-28 October, 2010.
 
62 Allahverdi A., Alibabaie M., Mohammadi J., Yarmohammadi A., Production of a new generation of cement cast stone using autoclave curing, 7th International Colloquium on Industrial Floors 2010, Technische Akademie Esslingen, Ostfildern, Germany, 14-16 December, 2010.
 
63 Ashrafizadeh S.A., Amidpour M., Allahverdi A., The influence of driving force distribution on exergy losses in cement burning system with secondary burner (in Persian), The 3rd Fuel and Combustion Conference of Iran, Tehran, Iran, 22-23 February, 2010 (3-4 Esfand, 1388). 
 
64 Allahverdi A., Ehsani M., Janpour H., Mechanical and thermal properties of nano-composite coating epoxy/silica prepared by using ultra-sonic waves (in Persian), 2nd National Conference of Modern Researches in Chemical Engineering, Islamic Azad University of Mahshahr, Mahshahr, Iran, 1-2 December 2010 (10-11 Azar, 1389).  
 
65 Mazidi M., Moghbeli M.R., Allahverdi A., Synthesis of latex particles containing anionic carboxylic functions and evaluation of their impact on cement paste (in Persian), 2nd National Conference of Modern Researches in Chemical Engineering, Islamic Azad University of Mahshahr, Mahshahr, Iran, 1-2 December 2010 (10-11 Azar, 1389).
 
66 Allahverdi A., The proper process for production and development of pozzolanic cements (in Persian), 1st National Seminar on Production and Utilization of Blended Cements, Tehran, Iran, January 15, 2011 (Day 15, 1389).
 
67 Allahverdi A., Rahmani A., Important engineering properties of natural pozzolan activated with a solid compound activator, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
68 Allahverdi A., Padar Z., Organo-modified bentonite as an admixture for Portland cement mortar, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
69 Allahverdi A., Kianpur K., Moghbeli M.R., Portland cement paste modified by polyvinyl alcohol, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
70 Allahverdi A., Shaverdi, B., Najafi Kani E., Determining the optimum dosage and composition of activator for alkali-activated blast-furnace slag, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
71 Najafi Kani E., Allahverdi A., Microstructure of inorganic polymeric binder based on natural pozzolan, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
72 Allahverdi A., Mahdavan M., Gharabeglu P., Durability of Portland cement blended with RFCC spent catalyst exposed to sea water attack, The 6th International Chemical Engineering Congress and Exhibition (IChEC 2009), Kish Island, Iran, 16-20 November, 2009.
 
73 Allahverdi A., Padar Z., Effect of organo-modified bentonite on some important physico-mechanical properties of Portland cement mortar, 17th IBAUSIL Conference, Weimar, Germany, 23-25 September, 2009.
 
74 Najafi Kani E., Allahverdi A., Reducing efflorescence formation in geopolymeric binder based on natural pozzolan, 17th IBAUSIL Conference, Weimar, Germany, 23-25 September, 2009.
 
75 Allahverdi A., Nemat Shahrbabaki M., Gharabeglu P., Sulfate resistance of Portland cement blended with spent RFCC catalyst, 17th IBAUSIL Conference, Weimar, Germany, 23-25 September, 2009.
 
76 Allahverdi A., Najafi Kani E., Karkeabadi R., Sabbaghian Sh., Investigating autogenous and drying shrinkage of alkali-activated natural pozzolan, 12th Iranian Chemical Engineering Congress (IChEC 12), Tabriz, Sahand University of Technology, Iran, 20-26 October, 2008.
 
77 Allahverdi A., Najafi Kani E., Sabbaghian Sh., Karkeabadi R., Workability and setting times of alkali-activated natural pozzolan in relation with chemical composition, 12th Iranian Chemical Engineering Congress (IChEC 12), Tabriz, Sahand University of Technology, Iran, 20-26 October, 2008.
 
78 Allahverdi A., Salem Sh., Basic engineering and physical properties of composite cement based on microsilica and limestone additives without dispersing agents Part 2; Physical properties and material characteristics, 2nd International Ceramic Conference (ICC2), Verona, Italy, June 30-July 04, 2008.
 
79 Allahverdi A., Salem Sh., Basic  engineering  and  physical  properties of composite  cement  based  on  microsilica  and limestone additives without dispersing agents, Part 1; Basic engineering properties, 2nd International Ceramic Conference (ICC2), Verona, Italy, June 30-July 04, 2008.
 
80 Allahverdi A., Najafi Kani E., Abolhasani S., Activation of natural pozzolan, 3rd International Symposium on Non-traditional Cement and Concrete, Brno, Czech Republic, pp. 43-56, 10-12 June, 2008.
 
81 Allahverdi A., Najafi Kani E., Synthesis and production of geopolymer cement from construction wastes, 3rd International Symposium on Non-traditional Cement and Concrete, Brno, Czech Republic, pp. 35-42, 10-12 June, 2008.
 
82 Allahverdi A., Najafi Kani E., Effects of curing time and temperature on strength development of natural pozzolan-based geopolymer cement, 3rd International Symposium on Non-traditional Cement and Concrete, Brno, Czech Republic, pp. 23-34, 10-12 June, 2008.
 
83 Allahverdi A., Najafi Kani E., Effects of chemical composition on basic engineering properties of natural pozzolan-based geopolymer cement, 3rd International Symposium on Non-traditional Cement and Concrete, Brno, Czech Republic, pp. 8-22, 10-12 June, 2008.
 
84 Allahverdi A., Najafi Kani E., Soltani Sh., Effects of particle size distribution improvement and dense packing technique on compressive strength of oil well cement, 5th International Chemical Engineering Congress (IChEC 2008), Kish Island, Iran, 2-5 January, 2008.
 
85 Allahverdi A., Vakilinia Sh., Gharabeglu P., RFCC spent catalyst as a high quality complementary cementitious material, 5th International Chemical Engineering Congress (IChEC 2008), Kish Island, Iran, 2-5 Jan, 2008.
 
86 Allahverdi A., Najafi Kani E., Esmaeilpoor S., Alkali-activated binder from blast-furnace slag of Isfahan steel plant, 5th International Chemical Engineering Congress (IChEC 2008), Kish Island, Iran, 2-5 Jan, 2008.
 
87 Allahverdi A., Najafi Kani E., Dehbozorgi, B., Waste management and cement production process (in Persian), Proc. National Congress on Energy Consumption in Cement Industry, Tehran, Iran, July 11, 2007.
 
88 Allahverdi A., Najafi Kani E., Gharabeglu P., Industrial experiences on utilizing pet-coke as an alternative fuel in cement industry (in Persian), Proc. National Congress on Energy Consumption in Cement Industry, Tehran, Iran, July 11, 2007.
 
89 Allahverdi A., Škvára F., Evaluating the potential application of fly ash/blast-furnace slag geopolymer material for inhibiting acid corrosion, A comparative study, Proc. 3rd Int. Conference on Alkali-activated Materials, Research, Production and Utilization, Prague, Czech Republic, pp. 21-37, June 21-22, 2007.
 
90 Allahverdi A., Škvára F., Gypsum-free Portland cement, An alkali-activated material suitable for acid corrosion protection, Proc. 3rd Int. Conference on Alkali-activated Materials, Research, Production and Utilization, Prague, Czech Republic, pp. 39-53, June 21-22, 2007.
 
91 Allahverdi A., Yazdanipour M., Hashemi M., Investigating the set and strength behaviours of blast-furnace slag blended geopolymer cement based on natural pozzolan, Proc. 3rd Int. Conference on Alkali-activated Materials, Research, Production and Utilization, Prague, Czech Republic, pp. 55-69, June 21-22, 2007.
 
92 Allahverdi A., Škvára F., Corrosion of hardened paste of gypsum-free Portland cement by sulfuric acid, Proc. Iranian Corrosion/2007; ICA International Congress, Tehran, Iran, 14-17 May, 2007.
 
93 Allahvedi A., Najafi Kani E., Esmaeelpour S., Geopolymers, A new generation of fire-resistant building materials (in Persian), Proc. 2nd Conference on Fire Protection of Buildings, Tehran, Iran, 20-21 February, 2007.
 
94 Allahverdi A., Yazdanipour M., Hashemi M., Blast-furnace slag blended geopolymer cement based on natural pozzolan, Proc. Iranian National Chemical Engineering Congress 11th, Tehran, Iran, 28-30 November, 2006.
 
95 Allahverdi A., Salem Sh., Studies on main properties of ternary blended cement with limestone powder and microsilica, Proc. Iranian National Chemical Engineering Congress 11th, Tehran, Iran, 28-30 November, 2006.
 
96 Allahverdi A., Najafi Kani E., Qualitative evaluation of Isfahan blast-furnace slag for production of slag-blended Portland cement (in Persian), Proc. Iranain National Chemical Engineering Congress 11th, Tehran, Iran, 28-30 November, 2006.  
 
97 Allahverdi A., Najafi Kani E., Special cement containing C11A7CaF2 mineral phase, Iranian Chemical Engineering Congress 10th, MP09-452, Sistan & Balouchestan University, Iran, 15-17 Nov., 2005.
 
98 Allahverdi A., Ghorbani J., Chemical activation and set acceleration of lime-pozzolan cement, Iranian Chemical Engineering Congress 10th, MP09-453, Sistan & Balouchestan University, Iran, 15-17 Nov., 2005.
 
99 Allahverdi A., Mehrpour K., Alkali-activation of Sirjan pozzolan, Iranian Chemical Engineering Congress 10th, MP09-454, Sistan & Balouchestan University, Iran, 15-17 Nov., 2005.
 
100 Allahverdi A., Effects of sulfate cycle on operation of rotary cement kilns,  32th International Conference of Slovak Society of Chemical Engineering, pp. 013-1 — 013-10, Bratislava, Slovak Republic, 23-27 May, 2005.
 
101 Allahverdi A., Alkali-activated fly ash cement (A new fly ash-based geopolymer cement), Proc. International Cement Conference, Tehran, Iran, vol. 1, pp. 291-297, 3-4 October, 2004.
 
102 Allahverdi A., The necessity of cement raw mix homogeneity, Part 1: undesirable effects of inhomogeneities in cement raw mix, Proc. International Cement Conference, Tehran, Iran, vol. 1, pp. 95-100, 3-4 October, 2004.
 
103 Allahverdi A., The necessity of cement raw mix homogeneity, Part 2: Investigating the causes for inhomogeneities in cement raw mix, Proc. International Cement Conference, Tehran, Iran, vol. 2, pp. 101-108, 3-4 October, 2004.
 
104 Allahverdi A., Škvára F., Development of an acid-resistant geopolymeric cement, International Congress of Chemical and Process Engineering 16th (CHISA 2004), Prague, Czech Republic, 22-26 August, 2004.
 
105 Allahverdi A., Moosavi R., Susceptibility of high productive cement kilns to sulfate cycle and the safe value of the system alkali-sulfate ratio (in Persian), Proc. Iranian National Chemical Engineering Congress 8th, Mashhad, Iran, 21-23 October, 2003.
 
106 Škvára F., Jungová I., Jilek T., Šlosar J., Allahverdi A., Kopecky L., Alkaliaktivierte flugasche – geopolymere, 15th International IBAUSIL congress, Weimar, Germany, 24-26 September, 2003.
 
107 Allahverdi A., Škvára F., Acidic corrosion of geopolymeric cements, Proc. Int. Conf. on fly ash, silica fume, slag and natural pozzolans in Concrete, 7th CANMET/ACI, Madras, India, vol. 2, 561-579, 2001.
 
دفعات مشاهده: 24053 بار   |   دفعات چاپ: 1673 بار   |   دفعات ارسال به دیگران: 18 بار   |   0 نظر
خبرهای اخیر
پیام تسلیت
مراسم جشن دانش آموختگی دانشکده
اساتید مشاور سال 1403
تبریک ارتقا
دانشجویان ممتازکارشناسی 1402-1403نیمسال دوم
لینک دانلود مستقیم کتاب (رایگان)