مجله بین‌المللی مهندسی خودرو

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Driving cycle is used to assess fuel consumption, pollutant emissions and performance of the vehicle. The aim of this paper is to extract the driving cycle for refuse collection truck and estimate its braking energy. For this purpose, after selecting the target truck and geographic area, the equipment needed to measure the required variables were prepared and mounted on the truck. Then, the actual data were collected from the performance of the target Truck while performing its mission. Since the amount of braking energy depends on the speed, truck mass and road grade, the speed of the vehicle is measured simultaneously with the truck mass and road grade. The collected data are then processed and subdivided into micro-trips. The micro-trips are clustered according to the number of state spaces using the K-Means algorithm. Next, the representative micro trips are selected from within the clusters and the final driving cycle is generated. The representative driving cycle shows that the truck speed is zero at 47% of the working time. Finally, the amount of braking power and accumulative braking energy in the driving cycle is calculated.

متن کامل [PDF 848 kb]   (5547 دریافت)    

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:

---