Curriculum Vitae

 Full Name: Dr. Roohollah Talebitooti

  Position: Associate Professor

  Phone: 98-21-73228974

  Fax: 98-21-73021506-7724 0488 

  Email: rtalebi AT iust.ac.ir

  Address: Iran University of Science & Technology,

 Tehran, IRAN

  University Degrees

• Ph.D, ., Iran University of Science and Technology, IRAN (2009)
• M.Sc., Iran University of Science and Technology, IRAN (2004)
• B.Sc., Iran University of Science and Technology, IRAN (2002)

  Research Interests

• Acoustics
• Vibration and noise controls
• Solid-Fluid Interactions

 Current Research

• Sound Transmission through laminated shells and plates using Higher Order and 3D Theories
• Wave Propagation through poroelastic materials
• Active Vibration control of piezoelectric patches on sandwich panels
• Analytical and Mechanical Modeling of Sloshing Liquid in a Container
• Flutter Analysis of a wing in subsonic Airflow
• Active and Passive control of Suspension Systems

  HONORS AND AWARDS

• First rank Student Award, IUST 1999
• Outstanding Student Award, IUST 1999
• Outstanding Student Award, IUST 2001
• Outstanding research Student Award, IUST 2002
• 3rd Position Award, Young Researcher Club 2002
• First rank, IUST 2003
• First rank, IUST 2004
• Outstanding research Student Award, IUST 2004

  Experiences

• Director of Student Affairs, 2010
• Vice-Chancellor for Student Affairs, 2010-2012
• Student provincial commissioner for special occasions , 2011-2012
• The third Board Member of the Alumni Association of the University of Science and Technology (2004-2006)
• The Forth Board Member of the Alumni Association of the University of Science and Technology (2006-2008)
• Instructor 2007-2009, School of Automotive Engineering, IUST.
• Assistant professor 2009-2013, School of Automotive Engineering, IUST.
• Assistant professor since September 2013, School of Mechanical Engineering, IUST.
• Cooperation with Department of Research and Design 2002 (Design and manufacturing of automotive brakes) AZIN TANEH Comp., Tehran, Iran

  International Collaborations

• Editorial board: Universal Journal of Applied Science (since May 2013)

  · Served as Reviewer for International and National Journals :

• Journal of Vibration and Control
• Journal of Sound and Vibration
• Composite Structures
• Materials Research
• Applied Mathematics Modeling
• International journal of Automotive Engineering
• Universal Journal of Applied Science
• Int J Advanced Design and Manufacturing Technology
• Journal of solids mechanics in Engineering
• Jornal of Modeling in Engineering
• Modares Mechanical Engineering

    Graduate Thesis Supervision

• MSc students

• Molla M. A.,"Study of Transmission Loss through the Air intake Duct with Inserting Porous Materials using SEA Method",2010.

• Mehdikhanlou, M. "Energy Absorption Charactristics and Strength Analysis of Side Beam in Automotive Side Crash",2010.

• Yadollahi A. "Analytical and Boundary Element Models of Sound Transmission through Automotive Muffler Shells", 2010.

•  Shahbaz S."The Investigation of Effective Parameters On Die-less Sheet Metal Forming", 2011.

•  Morovati M.(MSc Student) "Improvement of Torsional Vibration Damper Parameters in Crankshaft Non-Linear Vibrations",2012.

• Bayat R., "Design of Active-suspension to improving Ride-quality of a road-rail fire fighting vehicle",2012.

•  Khosravi H."Study of energy absorption & optimization of automotive hybrid thin-walled side beam considering the effects of impact", 2012.

•  Morteza Mirbagheri,"Modeling, Analysis and Optimization of Composite B-Pillar Considering Appropriate Stacking Sequence",2012.

• Mirmohammadi S.M.,"Investigation of Geometry Effects of Noise Barriers to Control The Traffic Noise", 2012.

• Pejhan K., "Acoustical Modeling of Functionally Graded Cylindrical Shell", 2012.

• Ranjbar B., "Analytical and SEA Model of Sound Transmission through Automotive Composite Laminated Double Panels Sound Insulation with Porous Material ", 2012.

•  Rezaei M., "Investigation on Longitudinal Sloshing Phenomenon and Its Effect on Ride Quality and Performance of Tank Vehicles and Optimization of a Typical Tanker", 2012.

• Haddadi M., "Control of the Active Anti-Roll Bar of Off-Road Vehicle for Roll Stability Improvement", 2013.

• Gheybi M. R.(MSc Student), "Sound Transmission through Laminated Composite Cylindrical Shells Using Third Order Shear Deformation Theory",2013.

• Eshraghi A. .(MSc Student), "Optimizing the Geometrical parameters of Sound Barriers to control the airport noise", 2014.

  Publications – Chapter Book

1. K. Daneshjou, H. Ramezani, R. Talebitooti, “Wave Processes in Classical and New Solids – Chapter 2– Acoustical Modeling of Laminated Composite Cylindrical Double-Walled Shell Lined with Porous Materials”, Available Online, InTech Publisher, http://dx.doi.org/10.5772/48646 

  Publications - Journal Papers

• ISI:

1. R. Talebitooti, A.M. Choudari Khameneh, Wave propagation across double-walled laminated composite cylindrical shells along with air-gap using three-dimensional theory, Compos. Struct. 165 (2017). doi:10.1016/j.compstruct.2016.12.068.

2. R. Talebitooti, H.D. Gohari, M.R. Zarastvand, Multi objective optimization of sound transmission across laminated composite cylindrical shell lined with porous core investigating Non-dominated Sorting Genetic Algorithm,(2017), doi: 10.1016/j.ast.2017.06.008.

3. R. Talebitooti, M Zarastvand, M Gheibi, Acoustic transmission through laminated composite cylindrical shell employing Third order Shear Deformation Theory in the presence of subsonic flow , Compos. Struct. 157 (2017).

4. A. Najibi, R. Talebitooti, Nonlinear transient thermo-elastic analysis of a 2D-FGM thick hollow finite length cylinder, Compos. Part B Eng. 111 (2017). doi:10.1016/j.compositesb.2016.11.055.

5. K. Daneshjou, R. Talebitooti, A. Tarkashvand, An exact solution of three-dimensional elasticity for sound transmission loss through FG cylinder in presence of subsonic external flow, Int. J. Mech. Sci. 120 (2017). doi:10.1016/j.ijmecsci.2016.10.008.

6. K. Daneshjou, R. Talebitooti, A. Tarkashvand, Investigation on sound transmission through thick-wall cylindrical shells using 3D- theory of elasticity in the presence of external and mean air-gap flow, (2017). doi.org/10.1177/1077546316655723

7.  R. Talebitooti, K. Daneshjoo, S.A.M. Jafari, Optimal control of laminated plate integrated with piezoelectric sensor and actuator considering TSDT and meshfree method, Eur. J. Mech. A/Solids. 55 (2016). doi:10.1016/j.euromechsol.2015.09.004.

8. R. Talebitooti, K. Daneshjou, M. Kornokar, Three dimensional sound transmission through poroelastic cylindrical shells in the presence of subsonic flow, J. Sound Vib. 363 (2016). doi:10.1016/j.jsv.2015.11.014.

9. R. Talebitooti, M. Torabi, Identification of tire force characteristics using a Hybrid method, Appl. Soft Comput. J. 40 (2016). doi:10.1016/j.asoc.2015.09.053.

10. K. Daneshjou, R. Talebitooti, M. Kornokar, Vibroacoustic study on a multilayered functionally graded cylindrical shell with poroelastic core and bonded-unbonded configuration, J. Sound Vib. (2016). doi:10.1016/j.jsv.2017.01.001.

11. K. Daneshjou, R. Talebitooti, A. Tarkashvand, Analysis of sound transmission loss through thick-walled cylindrical shell using three-dimensional elasticity theory, Int. J. Mech. Sci. 106 (2016). doi:10.1016/j.ijmecsci.2015.12.019.

12. R. Talebitooti, M.R. Zarastvand, M.R. Gheibi, Acoustic transmission through laminated composite cylindrical shell employing Third order Shear Deformation Theory in the presence of subsonic flow, Compos. Struct. 157 (2016). doi:10.1016/j.compstruct.2016.08.008.

13. A.A.T. Adnani, R. Talebitooti, M. Morovati, Three dimensional wave propagation in axially loaded pressurized FG cylindrical shells using frobenius power series and Rayleigh-Ritz methods, J. Vibroengineering. 17 (2015).

14. H. Ramezani, R. Talebitooti, Vibroacoustic Response of a Double-Walled Cylindrical FGM Shell with a Porous Sandwiched Layer, Mech. Compos. Mater. 51 (2015). doi:10.1007/s11029-015-9529-0.

15. R. Talebitooti, R. Ahmadi, M.H. Shojaeefard, Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method, Compos. Struct. 132 (2015). doi:10.1016/j.compstruct.2015.05.023.

16. R. Talebitooti, M.H. Shojaeefard, S. Yarmohammadisatri, Shape design optimization of cylindrical tank using b-spline curves, Comput. Fluids. 109 (2015). doi:10.1016/j.compfluid.2014.12.004.

17. R. Talebitooti, M. Morovati, Study on TVD parameters sensitivity of a crankshaft using multiple scale and state space method considering quadratic and cubic non-linearities, Lat. Am. J. Solids Struct. 11 (2014).

18. M.H. Shojaeefard, R. Talebitooti, R. Ahmadi, M.R. Gheibi, Sound transmission across orthotropic cylindrical shells using third-order shear deformation theory, Lat. Am. J. Solids Struct. 11 (2014).

19. M.H. Shojaeefard, R. Talebitooti, R. Ahmadi, B. Ranjbar, A study on acoustic behavior of poroelastic media bonded between laminated composite panels, Lat. Am. J. Solids Struct. 11 (2014).

20. M.H. Shojaeefard, R. Talebitooti, S.Y. Satri, M. Hassan Amiryoon, Investigation on natural frequency of an optimized elliptical container using real-coded genetic algorithm, Lat. Am. J. Solids Struct. 11 (2014).

21. M.H. Shojaeifard, R. Talebitooti, B. Ranjbar, R. Ahmadi, Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation, Appl. Math. Mech. (English Ed. 35 (2014). doi:10.1007/s10483-014-1877-7.

22. K. Daneshjou, M. Talebitooti, R. Talebitooti, Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method, Appl. Math. Mech. (English Ed. 34 (2013). doi:10.1007/s10483-013-1682-8.

23. K. Daneshjou, M. Talebitooti, R. Talebitooti, H.S. Googarchin, Dynamic analysis and critical speed of rotating laminated conical shells with orthogonal stiffeners using generalized differential quadrature method, Lat. Am. J. Solids Struct. 10 (2013).

24. D. Hashempoor, M.-H. Shojaeifard, R. Talebitooti, Analytical modeling of functionally graded plates under general transverse loads, Proc. Rom. Acad. Ser. A - Math. Phys. Tech. Sci. Inf. Sci. 14 (2013).

25. M.H. Shojaeefard, R. Talebitooti, S. Yarmohammadi Satri, Optimum design of 1st gear ratio for 4WD vehicles based on vehicle dynamic behaviour, Adv. Mech. Eng. 2013 (2013). doi:10.1155/2013/474872.

26. M. Talebitooti, K. Daneshjou, R. Talebitooti, Vibration and critical speed of orthogonally stiffened rotating FG cylindrical shell under thermo-mechanical loads using differential quadrature method, J. Therm. Stress. 36 (2013). doi:10.1080/01495739.2013.764807.

27. M.H. Shojaeifard, H.R. Zarei, R. Talebitooti, M. Mehdikhanlo, Bending behavior of empty and foam-filled aluminum tubes with different cross-sections, Acta Mech. Solida Sin. 25 (2012). doi:10.1016/S0894-9166(12)60057-3.

28. K. Daneshjou, H. Ramezani, R. Talebitooti, Wave transmission through laminated composite double-walled cylindrical shell lined with porous materials, Appl. Math. Mech. (English Ed. 32 (2011). doi:10.1007/s10483-011-1450-9.

29. M.H. Shojaeifard, R. Talebitooti, A. Yadollahi, Optimization of sound transmission through laminated composite cylindrical shells by using a genetic algorithm, Mech. Compos. Mater. 47 (2011). doi:10.1007/s11029-011-9225-7.

30. K. Daneshjou, M.M. Shokrieh, M.G. Moghaddam, R. Talebitooti, Analytical model of sound transmission through relatively thick FGM cylindrical shells considering third order shear deformation theory, Compos. Struct. 93 (2010). doi:10.1016/j.compstruct.2010.06.014.

31. M. Ghayour, S.Z. Rad, R. Talebitooti, M. Talebitooti, Dynamic analysis and critical speed of pressurized rotating composite laminated conical shells using generalized differential quadrature method, J. Mech. 26 (2010).

32. M. Talebitooti, M. Ghayour, S. Ziaei-Rad, R. Talebitooti, Free vibrations of rotating composite conical shells with stringer and ring stiffeners, Arch. Appl. Mech. 80 (2010). doi:10.1007/s00419-009-0311-4.

33. K. Daneshjou, A. Nouri, R. Talebitooti, Analytical model of sound transmission through orthotropic cylindrical shells with subsonic external flow, Aerosp. Sci. Technol. 13 (2009). doi:10.1016/j.ast.2008.02.005.

34. K. Daneshjou, R. Talebitooti, A. Nouri, Acoustic transmission through cylindrical shells treated with fld mechanisms, J. Mech. 25 (2009).

35. K. Daneshjou, R. Talebitooti, A. Nouri, Analytical model of sound transmission through orthotropic double walled cylinderical shells, Trans. Can. Soc. Mech. Eng. 32 (2008).

36. K. Daneshjou, A. Nouri, R. Talebitooti, Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation, Appl. Math. Mech. (English Ed. 29 (2008). doi:10.1007/s10483-008-0906-x.

37. K. Daneshjou, A. Nouri, R. Talebitooti, Sound transmission through laminated composite cylindrical shells using analytical model, Arch. Appl. Mech. 77 (2007). doi:10.1007/s00419-006-0096-7.

• Journal Papers – ISC

• More than 20 papers by 2017

• Conference Proceedings

• More than 55 national and international conference papers by 2017

  Courses Taught

• Machine Component Design 1 (Undergraduate)
• Machine Component Design 2 (Undergraduate)
• Machine Dynamics (Undergraduate)
• Engineering Mechanics-Statics (Undergraduate)
• Engineering Mathematics (Undergraduate)
• Solid Mechanics 1(Undergraduate)
• Solid Mechanics2(Undergraduate)
• Vehicle Dynamics(Undergraduate)
• Structural Dynamics(Graduate)
• Advance Mathematics(Graduate)
• Design of vehicle Suspension systems (Graduate)