|
Educational Records
|
Degree
|
Major
|
Year of Graduation
|
University
|
Location
|
|
B.Sc.
|
Materials Science & Engineering
(Industrial Metallurgy) |
2006 |
Iran University of Science and Technology |
Iran
|
|
M.Sc.
|
Materials Science & Engineering
(Metal Forming) |
2008 |
University of Tehran |
Iran
|
| Ph.D. |
Materials Science & Engineering
(Materials Selection and Characterization) |
2017 |
University of Tehran |
Iran |
| Post Doc. |
Materials Science & Engineering |
2018 |
University of Tehran/ Elites National Foundation |
Iran |
Teaching Experiences:
Fracture Mechanic
Metal Forming
Finite Element Methods
Mechanical Properties Lab.
|
Publications (ISI)
|
| Azizi, A. , Abedi, H.R., " Room temperature compressive superplasticity of low density steel", Scripta Materialiathis link is disabled, 2022, 216, 114757 |
| Saberipour, S. , Zarei-Hanzaki, A. , Abedi, H.R. , Moallemi, M., " Interplay of austenite and ferrite deformation mechanisms to enhance the strength and ductility of a duplex low-density steel", Journal of Materials Research and Technology, 2022, 18, pp. 755–768 |
| Aalipour, Z. , Zarei-Hanzaki, A. , Moshiri, A. , ... Kisko, A. , Karjalainen, L.P.," Strain dependency of dynamic recrystallization during thermomechanical processing of Mg-Gd-Y-Zn-Zr alloy", Journal of Materials Research and Technology, 2022, 18, pp. 591–598 |
| Paghandeh, M. , Zarei-Hanzaki, A. , Abedi, H.R. , Vahidshad, Y. , Minarik, P., " The correlation of c-to-a axial ratio and slip activity of martensite including microstructures during thermomechanical processing of Ti–6Al–4V alloy", Journal of Materials Research and Technology, 2022, 18, pp. 577–583 |
| Amirifard, M. , Zarei Hanzaki, A. , Abedi, H.R. , Eftekhari, N. , Wang, Q., " Toward superior fatigue and corrosion fatigue crack initiation resistance of Sanicro 28 pipe super austenitic stainless steel", Journal of Materials Research and Technology, 2022, 17, pp. 1672–1685 |
| Khani, R. , Zarei-Hanzaki, A. , Moshiri, A. , Abedi, H.R. , Sohn, S.S., " Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel", Journal of Materials Research and Technology, 2022, 17, pp. 1628–1641 |
| Jalali, M.S. , Zarei-Hanzaki, A. , Mosayebi, M. , ... Farabi, E. , Kim, S.-H., " Unveiling the influence of dendrite characteristics on the slip/twinning activity and the strain hardening capacity of Mg-Sn-Li-Zn cast alloys",Journal of Magnesium and Alloys, 2022 |
| Shamsolhodaei, A. , Zarei-Hanzaki, A. , Abedi, H.R. , Safdel, A. , Peterlechner, M., " Twin-based martensite stabilizing and improving the shape memory response of near equiatomic NiTi alloy through multi-axial forging", Journal of Materials Research and Technology, 2022, 16, pp. 39–46 |
| H.R. Abedi, A. Zarei Hanzaki, N. Haghdadi, and P. D. Hodgson. "Substructure induced twinning in low density steel", Scripta Materialia 128 (2017): 69-73. |
| H.R. Abedi, A. Zarei Hanzaki, N. Nemati, Dae-Eun Kim, "Trading off between dynamic strain aging and substructure evolution in κ-carbide-free lightweight steel at room temperature", Scripta Materialia 157 (2018) 110–114. |
| H.R. Abedi, A. Zarei Hanzaki, M. Azami, M. Kahnooji and D. Rahmatabadi, The high temperature flow behavior of additively manufactured Inconel 625 superalloy, Materials Research Express, 6 (2019) 116514 |
| H.R. Abedi, A. Zarei-Hanzaki, S. khoddam, "Effect of γ precipitates on the cavitation behaviour of wrought AZ31 magnesium alloy", Materials & Design 32 (2011) 2181-2190. |
| H.R. Abedi, A. Zarei-Hanzaki, E. Karimi, and N. Haghdadi. "The Shear Punch Jump Test—a Novel Application of a Small Specimen Testing Technique for Rapid Evaluation of Deformation Mechanisms", Experimental Mechanics 55 (2015) 1569-1573. |
| H.R. Abedi, A. Zarei-Hanzaki, S.M. Fatemi-Varzaneh, Ali A. Roostaei, "The semi-solid tensile deformation behavior of wrought AZ31 magnesium alloy", Materials & Design 31 (2010) 4386–4391. |
| H.R. Abedi, A. Zarei Hanzaki, Z. Liu, R. Xin, N. Haghdadi, and P. D. Hodgson. "Continuous dynamic recrystallization in low density steel", Materials & Design 114 (2017) 55-64. |
| H.R. Abedi, A. Zarei Hanzaki, Keng-Liang Ou, and Chih-Hua Yu. "Substructure hardening in duplex low density steel", Materials & Design 116 (2017) 472-480. |
| H.R. Abedi, A. Zarei-Hanzaki, M. Bagherzadeh Biucki, M. Emamy, "Evaluating the room temperature mechanical properties of age hardened AZ80 magnesium alloy using shear punch testing method", Materials Science & Engineering A 606 (2014): 360–369. |
| H.R. Abedi, A. Fareghi, H. Saghafian, S.H. Kheirandish, "Sliding wear behaviour of a ferritic–pearlitic ductile cast iron with different nodule count", Wear 268 (2010) 622-628. |
| A. Imandoust, A. Zarei-Hanzaki, H.R. Abedi, "Low temperature strain-induced ferrite transformation in twinning induced plasticity steel", Scripta Materialia 67 (2012): 995-998. |
| A. Habibiyan, A. Zarei-Hanzaki, H. R. Abedi, An investigation into microstructure and high-temperature mechanical properties of selective laser-melted 316L stainless steel toward the development of hybrid Ampliforge process, The International Journal of Advanced Manufacturing Technology 110 (2020), 383-394 |
| M. H. Asoushe, A. Zarei Hanzaki, H. R. Abedi, B. Mirshekari, T. Wegener, Thermal stability, microstructure and texture evolution of thermomechanical processed AlCoCrFeNi2. 1 eutectic high entropy alloy, Materials Science and Engineering: A 799 (2020) 140012. |
| O. Sabokpa, A. Zarei-Hanzaki, H.R. Abedi, "An investigation into the hot ductility behavior of AZ81 magnesium alloy", Materials Science and Engineering A 550 (2012) 31-38. |
| M. R. Rokni, A. Zarei-Hanzaki, H.R. Abedi, "Microstructure evolution and mechanical properties of backward extruded 7075 aluminium Alloy at elevated temperatures", Materials Science and Engineering A 532 (2012) 593-600. |
| P. Changizian, A. Zarei-Hanzaki, H.R. Abedi, "On the recrystallization behavior of homogenized AZ81 magnesium alloy: the effect of mechanical twins and γ precipitates", Materials Science and Engineering A 558 (2012) 44-51. |
| N. Haghdadi, A. Zarei-Hanzaki, H.R. Abedi, "The flow behavior modelling of cast A356 aluminium alloy at elevated temperatures considering the effect of strain", Materials Science and Engineering A 535 (2012): 252-257. |
| Ali A. Roostaei, A. Zarei-Hanzaki, H.R. Abedi, M.R. Rokni, "An investigation into the mechanical behaviour and microstructural evolution of the accumulative roll bonded AZ31 Mg alloy upon annealing", Materials & Design 32 (2011) 2963-2968. |
| N. Haghdadi, A. Zarei-Hanzaki, H.R. Abedi, O. Sabokpa, "The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminium alloy", Materials Science and Engineering A 549 (2012) 93-99. |
| S. Moemeni, A. Zarei-Hanzaki, H.R. Abedi, V. Torabinejad, "The application of shear compression specimen to study shear deformation behaviour of AZ31 Mg alloy at high temperatures and quasi-static regime", Experimental Mechanics 52 (2011) 629-636. |
| O. Sabokpa, A. Zarei-Hanzaki, H.R. Abedi, N. Haghdadi, "Artificial neural network modelling to predict the high temperature flow behavior of an AZ81 magnesium alloy", Materials & Design 39 (2012): 390-396. |
| Z. Shahri, Zarei-Hanzaki, H.R. Abedi, S. M. Fatemi Varzaneh, "An investigation to the hot deformation characteristics of AZ31 alloy through continuous cooling compression testing method", Materials and Design 36(2012): 470–476. |
| M. R. Rokni, A. Zarei-Hanzaki, H.R. Abedi, N. Haghdadi, "Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminium alloy", Materials & Design 36 (2012): 557-563. |
| A. Haft Baradaran, A. Zarei-Hanzaki, H.R. Abedi, S.M. Fatemi-Varzaneh, A. Imandoust, "The ductility behavior of a high-Mn twinning induced plasticity steel during cold-to-hot deformation", Materials Science and Engineering A 561 (2013): 411-418. |
| A. Abolhasani, A. Zarei-Hanzaki, H.R. Abedi, M.R. Rokni, "The room temperature mechanical properties of hot rolled 7075 aluminium alloy", Materials & Design 34 (2012): 631-636. |
| A. Imandoust, A. Zarei-Hanzaki, M. Sabet, H. R. Abedi, "An analysis of the deformation characteristics of a dual phase twinning-induced plasticity steel in warm working temperature regime", Materials & Design 40 (2012):556-561. |
| M.R. Rokni, A. Zarei-Hanzaki, Ali A. Roostaei, H.R. Abedi, "An investigation into the hot deformation characteristics of 7075 aluminium alloy", Materials & Design 32 (2011) 2339-234. |
| N. Haghdadi, A. Zarei-Hanzaki, A. R. Khalesian, H.R. Abedi, "Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy", Materials & Design 49 (2013) 386-391. |
| M. Ghiasabadi Farahani, A. Zarei-Hanzaki, H.R. Abedi, J. H. Kim, M. Jaskari, P. Sahu, L.P. Karjalainen, "On the activation of alternated stacking fault pair twinning mechanism in a very large-grained Fe–29Mn–2.4Al steel", Scripta Materialia, 178 (2019) 301-306. |
| E. Farghadany, A. Zarei-Hanzaki, H.R. Abedi, D. Dietrich, T. Lampke, "The strain accommodation in Ti–28Nb–12Ta–5Zr alloy during warm deformation", Materials Science & Engineering A 592 (2014): 57–63. |
| E. Farghadany, A. Zarei-Hanzaki, H.R. Abedi, D. Dietrich, M. R. Yadegari, T. Lampke, "The coupled temperature–strain rate sensitivity of Ti–29Nb–13Ta–4.6Zr alloy", Materials Science & Engineering A 610 (2014): 258–262. |
| A. Matin, F. Fereshteh Saniee, H. R. Abedi, "Microstructure and mechanical properties of Mg/SiC and AZ80/SiCnano-composites fabricated through stir casting method", Materials Science & Engineering A 625 (2015): 81–88. |
| A. Mohamadizadeh, A. Zarei-Hanzaki, H. R. Abedi, S Mehtonen, D. Porter, “Hot deformation characterization of duplex low-density steel through 3D processing map development”, Materials Characterization 107 (2015): 293-301. |
| M. Karam-Abian, A. Zarei-Hanzaki, H. R. Abedi, and S. Heshmati-Manesh. "Micro and macro-mechanical behavior of a transformation-induced plasticity steel developed by thermomechanical processing followed by quenching and partitioning", Materials Science and Engineering: A 651 (2016): 233-240. |
| A. Mirzaei., A. Zarei-Hanzaki, and H. R. Abedi. "Hot Ductility Characterization of Sanicro-28 Super-Austenitic Stainless Steel", Metallurgical and Materials Transactions A 47 (2016): 2037-2048. |
| M. Mahdavian, H. Khatami-Hamedani, and H. R. Abedi. "Macrostructure evolution and mechanical properties of accumulative roll bonded Al/Cu/Sn multilayer composite", Journal of Alloys and Compounds 703 (2017): 605- 613. |
| S. Asqardoust, A. Z. Hanzaki, H. R. Abedi, T Krajnak, P Minárik, Enhancing the strength and ductility in accumulative back extruded WE43 magnesium alloy through achieving bimodal grain size distribution and texture weakening, Materials Science and Engineering: A 698 (2017): 218-229M. |
| F. Rajabi, AZ Hanzaki, H. R. Abedi, E Farghadani, Corrosion behavior of thermo-mechanically processed biomedical Ti-29Nb-13Ta-4.6 Zr, Journal of Alloys and Compounds 725 (2017) 23-31. |
| A. Zinsaz-Borujerdi, A. Zarei-Hanzaki, H. R. Abedi, M. Karam-Abian, H. Ding, Room temperature mechanical properties and microstructure of a low alloyed TRIP-assisted steel subjected to one-step and two-step quenching and partitioning process, Materials Science and Engineering A 725 (2018) 341-349. |
| A. Barabi, A. Zarei‐Hanzaki, H. R. Abedi, A. Anoushe, JH. Cho, The Correlation of Macrostructure, Microstructure, and Texture with Room Temperature Mechanical Properties of a Twinning‐Induced Plasticity Automotive Steel after Friction Stir Spot Welding/Processing, Steel Research International (2018), 1800245-1800261 |
| F. Haftlang, A. Z. Hanzaki, H. R. Abedi, D. Preisler, K. Bartha, The subsurface frictional hardening: A new approach to improve the high-speed wear performance of Ti-29Nb-14Ta-4.5 Zr alloy against Ti-6Al-4V extra-low interstitial, Wear 422-423 (2019) 137-150. |
| S. M. Ramezani, A. Zarei-Hanzaki, H. R. Abedi, A. Salandari-Rabori, P. Minarik, Achievement of fine-grained bimodal microstructures and superior mechanical properties in a multi-axially forged GWZ magnesium alloy containing LPSO structures, Journal of Alloys and Compounds 793 (2019) 134-145. |
| M.H. Mohammad Ebrahimi, A. Zarei-Hanzaki, H. R. Abedi, S. M. Vakili, C. K. Soundararajan, The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite, Journal of Alloys and Compounds 806 (2019) 1550-1563 |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, The wear induced crystallographic texture transition in Ti-29Nb-14Ta-4.5 Zr alloy, Applied Surface Science, 491 (2019) 360-373. |
| M. Kahnooji, A. Zarei-Hanzaki, H. R. Abedi, M. Hassanpour-Esfahani, M. S. Jalali, J. Gubicza, A. Heczel, An investigation into the dynamic recrystallization behavior of a non-equiatomic high entropy alloy, Materials Science and Engineering: A, 768 (2019) 138423. |
| F. Rajabi, A. Zarei-Hanzaki, H. R. Abedi, H. Hoseiny, A. Najdahmadi, E. Bertrand, Microstructure evolution and corrosion behavior of Ti-29Nb-13Ta-4.6 Zr nano-biocomposite fabricated by friction stir processing in simulated body fluid solution, Materials Research Express, 6 (2019) 105414. |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, M. A. Kalaei, “Tribological Performance and Electrochemical Behavior of Ti‐29Nb‐14Ta‐4.5Zr Alloy in Simulated Physiological Solution”, Advanced Engineering Materials 22 (2020)1900758. |
| H. Khatami-Hamedani, A. Zarei-Hanzaki, H. R. Abedi, AS Anoushe, Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel, Materials Science and Engineering: A 788 (2020) 139400 |
| H. Esmaeilpour, A. Zarei-Hanzaki, N. Eftekhari, H. R. Abedi, Strain induced transformation, dynamic recrystallization and texture evolution during hot compression of an extruded Mg-Gd-Y-Zn-Zr alloy, Materials Science and Engineering: A 778 (2020) 139021. |
| M. Mosayebi, A. Zarei-Hanzaki, H. R. Abedi, A. Barabi, M. S. Jalali, A. Ghaderi, M. Barnett, The correlation between the recrystallization texture and subsequent isothermal grain growth in a friction stir processed rare earth containing magnesium alloy, Materials Characterization 163 (2020) 110236. |
| A. M. Jamili, A. Zarei-Hanzaki, H. R. Abedi, M. Mosayebi, R. Kocich, Development of fresh and fully recrystallized microstructures through friction stir processing of a rare earth bearing magnesium alloy, Materials Science and Engineering: A 775 (2020) 138837 |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, M. A. Kalaei, J. Nemecek, J. Málek, Room-temperature micro and macro mechanical properties of the metastable Ti–29Nb–14Ta–4.5 Zr alloy holding nano-sized precipitates, Materials Science and Engineering: A 771, 138583. |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, In-situ Frictional grain refinement mechanism of Ti-29Nb-14Ta-4.5 Zr bio-alloy during high-speed sliding wear, Materials Letters, 261 (2020) 127083. |
| S. M. Vakili, A. Zarei-Hanzaki, A. S. Anoushe, H. R. Abedi, M. H. Mohammad-Ebrahimi, M. Jaskari, S. S. Sohn, D. Ponge, L.P. Karjalainen, “Reversible dislocation movement, martensitic transformation and nano-twinning during elastic cyclic loading of a metastable high entropy alloy”, Acta Materialia, 185 (2020) 474-492. |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, The effect of nano-size second precipitates on the structure, apatiteinducing ability and in-vitro biocompatibility of Ti-29Nb-14Ta-4.5 Zr alloy, Materials Science and Engineering:C 109 (2020) 110561 |
| M. Ebrahimi, A. Zarei Hanzaki, H. R. Abedi, M. Azimi, S. Mirjavdi, Correlating the microstructure to mechanical properties and wear behavior of an accumulative back extruded Al-Mg 2 Si in-situ composite, Tribology International 115 (2017) 199-211. |
| M. Mosayebi, A. Zarei-Hanzaki, H. R. Abedi, A. Ghaderi, The hierarchical texture evolution of RE-component during friction stir processing of Mg-RE/SiCp composite, Materials Letters 263 (2020), 127209. |
| M. Eskandari, A. Zarei-Hanzaki, H. R. Abedi, "An investigation into the room temperature mechanical properties of nano-crystalline austenitic stainless steels", Materials & Design 45 (2013) 674-681. |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, J. Málek, E. Farabi, H. Beladi, Outstanding Mild Wear Performance of Ti–29Nb–14Ta–4.5 Zr Alloy Through Subsurface Grain Refinement and Supporting Effect of Transformation Induced Plasticity, Metals and Materials International, (2019) 1-10. |
| F. Haftlang, A. Zarei-Hanzaki, H. R. Abedi, M. Jaskari, L. P. Karjalainen, The effect of nano-size second phases on the tribological performance of TNTZ alloy, Materials Research Express 6 (2019) 095031. |
| A. M. Jamili, A. Zarei-Hanzaki, H. R. Abedi, P. Minárik, The grain boundary character distribution in thermomechanically processed rare earth bearing magnesium alloy, Journal of Alloys and Compounds 798 (2019) 158-166. |
| M. Hassanpour-Esfahani, A. Zarei-Hanzaki, H. R. Abedi, H. S. Kim, D. Yim, The enhancement of transformation induced plasticity effect through preferentially oriented substructure development in a high entropy alloy, Intermetallics 109 (2019) 145-156. |
| A. R. Kalantari, A. Zarei-Hanzaki, H. R. Abedi, M. Hassanpour Esfahani, S. J. Park, J. Y. Park, Microstructure evolution and room temperature mechanical properties of a thermomechanically processed ferrite-based low density steel, Materials Science and Engineering: A 754 (2019) 57-67. |
| M. Karam-Abian, A. Zarei-Hanzaki, H. R. Abedi, S. Ghodrat, F. Hajy-Akbary, and L. Kestens, The Effect of Martensite-Austenite Constituent Characteristics on the Mechanical Behavior of Quenched-Partitioned Steel at Room Temperature, Steel Research Int. 90 (2019), 1800399 |
| A. Maghsoudlou, A. Zarei-Hanzaki, H.R. Abedi, A. Barabi, F. Pilehva, D. Dietrich, T. Lampke, The room temperature tensile deformation behavior of thermomechanically processed ß-metastable Ti-Nb-Ta-Zr bio-alloy: the role of deformation induced martensite, Materials Science & Engineering A 738 (2018) 15–23 |
| S. Akbarian, A. Zarei‐Hanzaki, H. R. Abedi, R. Unnikrishnan, R. Moat, Substructure Development and Deformation Twinning Stimulation through Regulating the Processing Path during Multi‐Axial Forging of Twinning Induced Plasticity Steel, Advanced Engineering Materials 20 (2018) 1800453-1800464. |
| A. Salandari-Rabori, A. Zarei-Hanzaki, H. R. Abedi, J. S. Lecomte, Micro and macro texture evolution during multiaxial forging of a WE43 magnesium alloy, Journal of Alloys and Compounds 739 (2018) 249-259. |
| H. E. Sabzi, A. Zarei-Hanzaki, H. R. Abedi, A. Mateo, J. J. Roa, The sequential twinning-transformation induced plasticity effects in a thermomechanically processed high Mn austenitic steel, Materials Science and Engineering A 725 (2018) 242-249 |
| A. M. Jamili, A. Zarei-Hanzaki, H. R. Abedi, P Minárik, R Soltani, The microstructure, texture, and room temperature mechanical properties of friction stir processed Mg-Y-Nd alloy, Materials Science and Engineering: A 690 (2017) 244-253. |
| H. Eskandari Sabzi, A. Zarei Hanzaki, H. R. Abedi, R. Soltani, A. Mateo, and J. J. Roa. "The effects of bimodal grain size distributions on the work hardening behaviour of a TRansformation-TWinning induced plasticity steel", Materials Science and Engineering: A 678 (2016): 23-32. |
| M. Karam‐Abian, A. Zarei‐Hanzaki, and H. R. Abedi. "The Local Characterization of Individual Phase Mechanical Properties Using Nano‐Indentation and In Situ Scanning Probe Microscopy in an Advanced High Strength Steel", Steel Research International 88 (2017): 1600274. |
| A. Mohamadizadeh, A. Zarei-Hanzaki, and H. R. Abedi. "Modified constitutive analysis and activation energy evolution of a low-density steel considering the effects of deformation parameters", Mechanics of Materials 95 (2016): 60-70. |
| N. Haghdadi, A. Zarei-Hanzaki, H. R. Abedi, D. Abou-Ras, M. Kawasaki, and A. P. Zhilyaev. "Evolution of microstructure and mechanical properties in a hypoeutectic Al–Si–Mg alloy processed by accumulative back extrusion", Materials Science and Engineering: A 651 (2016): 269-279. |
| E. Farabi, A. Zarei‐Hanzaki, and H. R. Abedi. "Processing map development through elaborating phenomenological and physical constitutive based models", Advanced Engineering Materials 18 (2015): 572–581 |
| A. H. Shafieizad, A. Zarei-Hanzaki, H. R. Abedi, and K. J. Al-Fadhalah. "The Mg 2 Si phase evolution during thermomechanical processing of in-situ aluminum matrix macro-composite", Materials Science and Engineering: A 644 (2015): 310-317. |
| A. Shamsolhodaei, A. Zarei‐Hanzaki, and H. R. Abedi. "The Enhanced Shape Memory Effect and Mechanical Properties in Thermomechanically Processed Semi‐Equiatomic NiTi Shape Memory Alloy", Advanced Engineering Materials 18 (2016): 251-258. |
| M. Taheri-Mandarjani, A. Zarei-Hanzaki, H.R. Abedi, "Hot ductility behavior of an extruded 7075 aluminum alloy", Materials Science and Engineering A, 637 (2015) : 107-122. |
| M. H. Maghsoudi, A. Zarei-Hanzaki, H. R. Abedi, and A. Shamsolhodaei. "The evolution of γ-Mg17Al12 intermetallic compound during accumulative back extrusion and subsequent ageing treatment", Philosophical Magazine 95 (2015): 3497-3523. |
| N. Habibi, A. Zarei-Hanzaki, and H.R. Abedi, "An investigation into the fracture mechanisms of twinning-inducedplasticity steel sheets under various strain paths", Journal of Materials Processing Technology, 224 (2015):102-116. |
| E. Farabi, A. Zarei-Hanzaki, and H.R. Abedi, "High Temperature Formability Prediction of Dual Phase Brass Using Phenomenological and Physical Constitutive Models", Journal of Materials Engineering and Performance 24 (2014): 209–220 |
| M.H. Maghsoudi, A. Zarei-Hanzaki, H.R. Abedi, "Modification of the grain structure, γ phase morphology and texture in AZ81 Mg alloy through accumulative back extrusion", Materials Science & Engineering A 595 (2014): 99–108. |
| A. R. Khalesian, A. Zarei-Hanzaki, H.R. Abedi, F. Pilehva, "An investigation in to the room temperature mechanical properties and microstructural evolution of thermomechanically processed TWIP steel", Materials Science & Engineering A 596 (2014): 200–206. |
| P. D. Nezhadfar, A. Zarei-Hanzaki, S. S. Sohn, and H. R. Abedi. "The microstructure evolution and room temperature deformation behavior of ferrite-based lightweight steel", Materials Science and Engineering: A 665 (2016): 10-16. |
| P. Dastur, A. Zarei-Hanzaki, M. H. Pishbin, M. Moallemi, H. R. Abedi, Transformation and twinning induced plasticity in an advanced high Mn austenitic steel processed by martensite reversion treatment, Materials Science and Engineering: A 696 (2017): 511-519. |
| M. Ghasemzadeh-Khoshkroudi, A. Zarei-Hanzaki, A. H. Shafieizad, H. R. Abedi, Qualitative and Quantitative Analysis of Thermomechanical Behavior of an Al4Sr Dispersed In Situ Composite, Journal of Materials Engineering and Performance 26 (2017) 1236-1244, 2017 |
| P. Teymoory, A. Zarei Hanzaki, E. Farabi, H. Monajati, H. R. Abedi, Grain Refinement through Shear Banding in Severely Plastic Deformed A206 Aluminum Alloy, Advanced Engineering Materials 20 (2018) 1700502-1700514. |
| P. Teymoory, A. Zarei-Hanzaki, A. Shafieizad, H. R. Abedi, J. Vesely, M. Ebrahimi, Evaluating the high temperature superplastic behavior of a thermomechanically processed Al-Cu aluminum alloy through miniaturized testing method, Materials Research Express 6 (2019) 105010. |
| E. Ghanbari, , A. Zarei-Hanzaki, E. Farghadany, H. R. Abedi, and Sh. Khoddam, "High-Temperature Deformation Characteristics of a β-Type Ti-29Nb-13Ta-4.6 Zr Alloy", Journal of Materials Engineering and Performance 25 (2016): 1554-1561. |
| P. D. Nezhadfar, A. Zarei-Hanzaki, S. S. Sohn, and H. R. Abedi. "Characterization of twin-like structure in a ferritebased lightweight steel", Metals and Materials International 22 (2016): 810-816. |
| A. Marandi, R. Zarei-Hanzaki, A. Zarei-Hanzaki, H.R. Abedi, "Dynamic recrystallization behavior of new transformation–twinning induced plasticity steel", Materials Science & Engineering A 607 (2014): 397–408. |
| N. Haghdadi, A. Zarei-Hanzaki, S. Heshmati-Manesh, H.R. Abedi, S.B. Hassas-Irani, "The semisolid microstructural evolution of a severely deformed A356 aluminum alloy", Materials and Design 49 (2013): 878–887. |
| F. Pilehva, A. Zarei-Hanzaki, M. Ghambari, H.R. Abedi, "Flow behavior modeling of a Ti-6Al-7Nb biomedical alloy during manufacturing at elevated temperatures", Materials and Design 51 (2013): 457–465. |
| M. Eskandari, A. Zarei-Hanzaki, F. Pilehva, H. R. Abedi, S. M. Fatemi-Varzaneh, A. R. Khalesian, "Ductility improvement in AZ31 magnesium alloy using constrained compression testing technique", Materials Science & Engineering A 576 (2013): 74–81. |
| E. Karimi, A. Zarei-Hanzaki, S. H. Pishbin, H.R. Abedi, P. Changizian, "Instantaneous strain rate sensitivity of wrought AZ31 magnesium alloy”, Materials and Design 49 (2013): 173–180. |
| V. Torabinejad, A. Zarei-Hanzaki, M. Sabet, H.R. Abedi, "The effect of low temperature annealing on the mechanical behaviour of cold rolled dual-phase Twinning-Induced Plasticity steel", Materials & Design 32 (2011) 2345-2349. |
| M. Haghshenas, A. Zarei-Hanzaki, S. M. Fatemi-Varzaneh, H.R. Abedi, "Hot deformation behaviour of thixocast A356 aluminium alloy during compression at elevated temperatures", International Journal of Material Forming 1 (2008) 1001-1005. |
| A. Barabi, A Zarei-Hanzaki, M. Mosayebi, A. Mohamadizadeh, A. S. Anoushe, H. R. Abedi, A Maghsoudlou, Y. S.Sato, Novel analytical approach for evaluating the mechanical properties of friction stir spot joints through constitutive modeling, Engineering Fracture Mechanics, 216 (2019) 106522. |
| F. Vahedi, A. Zarei-Hanzaki, A. Salandari-Rabori, A. Razaghian, H. R. Abedi, P. Minarik, Texture evolution and wear properties of a frictionally stir processed magnesium matrix composite reinforced by micro graphite and nano graphene particles, Materials Research Express, 6 (2019) 1065c6. |
| F. Vahedi, A. Zarei-Hanzaki, A. Salandari-Rabori, H. R. Abedi, A. Razaghian, P. Minarik, Microstructural evolution and mechanical properties of thermomechanically processed AZ31 magnesium alloy reinforced by micro-graphite and nano-graphene particles, Journal of Alloys and Compounds (2019) 152231. |
| M. Mosayebi, H. R. Abedi, A.M. Jamili, A. Ghaderi, M. Barnett, Development of a novel RE-texture component in a Mg-Y-RE / SiC p magnesium, Materials Letter (2019) 126899. |
| A. Moshiri, A. Zarei-Hanzaki, AS. Anoushe, H. R. Abedi, B. Mirshekari, F. Berto, Stress-relaxation viewpoint to study the room-temperature cyclic deformation behavior of a low-density steel, International Journal of Fatigue 139 (2020) 105673. |
| B. Mirshekari, A. Zarei-Hanzaki, A. Barabi, A. Moshiri, H. R. Abedi, S. J. Lee, H. Fujii, Optimizing the austenite stability in a ferritic lightweight steel through thermomechanical processing, Materials Characterization 166 (2020) 110367 |
| S. M. Ramezani, A. Zarei-Hanzaki, AS. Anoushe, H. R. Abedi, P. Minarik, A new insight into LPSO transformation during multi-axial forging in Mg-Gd-Y-Zn-Zr alloy, Materials Letters 269 (2020), 127625 |
| S. Moradnezhad, A. Razaghian, R. Taghiabadi, H. R. Abedi, A. Salandari-Rabori, M. Emamy, Effect of Ca additions on evolved microstructures and subsequent mechanical properties of a cast and hot-extruded Mg–Zn–Zr magnesium alloy, The International Journal of Advanced Manufacturing Technology (2019) 1-11. |
| M. A. Kalaie, A. Zarei-Hanzaki, P. Dastur, J. Málek, H. R. Abedi, Duality in dislocation density-superelasticity correlation in a TNTZ bio alloy processed by cold rolling and subsequent annealing, Materials Science and Engineering: A 782 (2020) 139181. |
| M. S. Jalali, A. Zarei-Hanzaki, A. M. Jamili, H. R. Abedi, M. Mosayebi, S. M. Vakili, The effect of rare earth elements on the work softening behavior of as-cast Mg-4Al-2Sn, Materials Research Express 6 (2020), 125425 |
| M. J. Bathaei, A. Zarei-Hanzaki, J. Nourmohammadi, F. Haftlang, H. R. Abedi, In vitro comparative investigation of bioactivity and biocompatibility behavior of titanium nano-composites fabricated by friction stir processing, Materials Research Express 6 (2020), 125425 |
| H. Khoshzaban Khosroshahi, F. Fereshteh Saniee, H.R. Abedi, "Mechanical properties improvement of cast AZ80 Mg alloy nano particles composite via thermomechanical processing", Materials Science & Engineering A 595 (2014): 284–290. |
| M. S. Jalali, A. Zarei-Hanzaki, M. Malekan, H. R. Abedi, M. Mosayebi, E. Farabi, Throughput study of diffusion along the twin boundaries in Mg-5Sn-0.3 Li as-cast alloy and its effect on the homogenization during hot deformation, Materials Letters 281 (2020) 128446. |
| H. Shahsa, A. Zarei-Hanzaki, H. R. Abedi, JH. Cho, SH. Han, Formation and Stabilization of 18R Long-Period Stacking Order Phase Through Friction Stir Processing of Mg-Gd-Y-Zn Alloy, Metallurgical and Materials Transactions A 51 (11), 5623-5627. |
| B. Mirshekari, A. Zarei-Hanzaki, A. Barabi, H. R. Abedi, S. J. Lee, H. Fujii, An anomalous effect of grain refinement on yield stress in friction stir processed lightweight steel, Materials Science and Engineering: A 799 (2020) 140057. |
| SH. Akbarian, A. Zarei-Hanzaki, AS. Anoushe, H. R. Abedi, R Unnikrishnan, Step-by-step texture modification through strain path change toward improvement of the hardening capacity in a twinning-induced-plasticity steel, Materials Science and Engineering: A 799 (2020) 140269 |
|
Written Works
|
Book's Name
|
Author's Name
|
Date
|
|
|
|
|
(2).jpg)
iust.ac.ir