Personal Details                                                                                                 NAME: Alireza  SURNAME: Mirhabibi ACCADEMIC STATUS: Assistant Professor in IUST  Fields of Research Interests: Ceramics, Carbon and Composites, Nanomaterials, Coatings and Pigments
Contact Address School of Metallurgy & Materials Engineering Iran University of Science and Technology (IUST), Narmak, Tehran, Iran Tel: +9821-7724540-550 , Ext: 2817 Fax: +9821-77240480 E-mail: ar_mirhabibi@iust.ac.ir
Publications E. Ghasemi, A. Mirhabibi, M. Edrissi, R. Aghababazadeh, R.M. Brydson, " Study on the magnetorheological properties of mahemite-kerosene ferrofluid", Journal of Nanoscience and Nanotechnology, Vol. 9, 2009, pp. 4273-4278 M. Bodaghi , A. Mirhabibi, M.R. Tahriri, H. Zolfonoon, M. Karimi, "Mechanochemical assisted synthesis and powder characteristics of nanostructure ceramic of α -Al2O3 at room temperature", Materials Science and Engineering B162, 2009, pp. 155-161 L. Nikzad , A. Mirhabibi, M.R. Vaezi , J. Javadpour, " Tape casting of graphite in non-aqueous media", Materials and Design  Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, R.M. Brydson, "A study on the Effects of Three types of Deflocculants and the increase in the pH on the Rheological Behavior of Nano Carbon Suspensions", Journal of Nanoscience and Nanotechnology, Vol.9, 2009, pp. 4507-4513 M. Alavi, A. Mirhabibi, R. Landschoot, N. Landschoot, E. Kelder, J. Schoonman, " A special laboratory method to prepare colored ceramic Glazez without Lead, using a traditional Glazing technique", Iranian Journal of Crystallography and Mineralogy, Vol 16,  No. 4,2009 M. Rabiee, A. Mirhabibi, F. Moztar Zadeh, R. Aghababazadeh, E. Mohaghegh pour , L. Lin, "A new method of biomolecular recognition of avidin by light scattering of Zns:Mn nano-particles" E. Ghasemi, A. Mirhabibi, M. Edrissi, " Synthesis and rheological properties of an iron oxide ferrofluid", Journal of Magnetism and Magnetic Materials 320, 2008, pp. 2635-2639 M. Bodaghi, A. Mirhabibi, H. Zolfonoon, M. Tahriri, M. Karimi, " Investigation of phase transition of-alumina via mechanical milling method", Phase Transitions, Vol. 81, No. 6, 2008, pp. 571-580 M. Bodaghi, A. Mirhabibi, H. Zolfonoon, M. Salehi, M. Tahriri, " Preparation and characterization of a-Al2O3 powder from Y-Al2O3 powder using mechanical milling technique", Materials Research Innovations, Vol. 12, No. 4, 2008, pp. 157-161 L. Samiee, H. Sarpoolaky, A.Mirhabibi, “Influence of bubble structure on adherence and chemical durability of procelain enamel”, Advances in Applied Ceramics, No. 1, 2008 A. Moballegh, H.R. Shahverdi, R. Aghababazadeh, A. Mirhabibi, “ZnO nanoparticles obtained by mechanochemical technique and the optical properties”, Surface Science, 2007 R. Aghababazadeh, A. Mirhabibi, J. Pourasad + 4 other author, “Economical synthesis of nanocrystalline alumina using an environment alloy low – cost binder”, Surface Science, 2007 R. Aghababazadeh, A. Mirhabibi + 4 other author, “Synthesis and characterization of nanocrystalline titanium nitride powder from rutile and anatase as precursors”, Surface Science, 2007 R. Aghababazadeh, S. Tabatabaie, A. Shokuhfar, A. Mirhabibi, “Synthesis and characterization of Silica nanoparticles”, Solid State Phenomena, No. 121-123, 2007, pp. 49-52 A. Ahmadi, H. Sarpoolaky, A. Mirhabibi, F. Golestani-Fard, “The effect of Graphite addition on corrosion behaviour of TAR bonded dolomite to refractories in steelmaking counter”, Iranian Journal of Material Sci. & Eng., No. 3,4, 2007 F. Doulati, Kh. Badii, N. Yousefi, N.M. Mahmoodi, M. Arami, S.Z. Shafeei, A. Mirhabibi, “Numerical modeling and laboratory studies on the removal of direct red 23 and direct red 80 dyes from textile effluents using orange peel, alow-cost adsorbent”, Dyes and pigments, 2007, pp. 178-185 F. Doulati, Kh. Badii, N. Yousefi, S.Z. Shafaei, A. Mirhabibi, “Adsorbtion of direct red 80 dye from aqueous solution onto almond shells: Effect of PH, initail concentration and shell type”, Journal of Hazadous materials, 2007 F. Doulati, Kh. Badii, N. Yousefi, S.Z. Shafaei, A.R. Mirhabibi, “Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose process”, Journal of Hazadous Materials, 2007 L. Samiee, H. Sarpoolaky, A. Mirhabibi, “Microstructure and adherence of cobalt containing and cobalt free enamels to low carbon steel”, Materials Sci. & Eng., 2007 A. Mirhabibi, B. Rand, “Graphite flake-carbon composites II: fracture behaviour, toughness, notch insensitivity and weibull modulus”, Carbon 2007 A. Mirhabibi, M. Esfidari, R. Babazadeh, “Synthesis of gold pearlessent pigment via heat treatment of mica”, J. Coat Technol Res., 2007 M. Rabiee, F. Moztarzadeh, A. Mirhabibi, E. Mohagheghpour, B. Bahmani, “Synthesis of Zinc Sulfide nanocrystall phosphorescence capped with 2-mercapto ethanol for using in biological diagnoses”, Int. J. of Eng & Sci., No. 17, 2006 S. Baghshahi, A. Mirhabibi, “Sintering of slip cast uniaxially pressed nano-and submicron sized alumina powders using the taguchi approach in the design of experiments”, Industrial Ceramics, 2006 M. Shirpour, M.A. Faghihisani, A. Mirhabibi, “Synthesis and study of a new class of red pigments based on perouskite YAlO3 structure”, Ceramics Int., 2006 R. Aghababazadeh, B. Mazinani, A. Mirhabibi, M. Tamizifar, “ZnO nanoparticles synthesized by mechanichemical processing”, J. of Physics, No. 26, 2006, pp. 312-314 R. Aghababazadeh, A. Mirhabibi, H. Bastami, E.T. Taheri, L. Lin, “Preparation and characterization of zinc yellow pigment for low temperature ceramic glaze”, Pigment & Resin Technology, No. 3, 2005, pp. 124-131. A. Mirhabibi, M. Rabiee, R. Aghababazadeh, F. Moztarzadeh, S. Hesaraki, “Preparation of and photo-and electrominescence characteristics of ZnS: Cu phosphor”, Pigment & Resin Technology, Vol. 32, No. 6, 2004, pp. 358-363. R. Aghababazadeh, A. Mirhabibi, F. Moztarzadeh, Z. Salehpour, “Synthesis and characteriezation of chromic oxide as a pigment for high temperature application”, Pigment & Resin Technology, No. 3, 2003, pp. 160-165 R. Aghababazadeh, A. Mirhabibi, F. Moztarzadeh, Z. Salehpour, “Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy”, Pigment & Resin Technology, Vol. 32, No. 3, 2003, pp. 160-165 E. Hajjar, M. Divandari, A. Mirhabibi, “The study of electroless coating of nickel on carbon fibers”, Iranian J. of Materials Science & Eng., Vol. 1, No. 1, 2003 A. Mirhabibi, B. Rand, S. Baghshahi, R. Aghababazadeh, “Graphite flake carbon composites with a sinterable microbead matrix”, Carbon, 2003 M. Saeidpour, R. Aghababazadeh, A. Mirhabibi, "An attempt to preparation of mesoporous for reaction", First International Conference on Multifunctional , Hybrid and Nanomaterials, 2009 E. Ghasemi, A. Mirhabibi, M. Edrissi , sh. Saket, " Synthesis and characterizations of aniron oxide nanopigment", International ceramic glass potcelan enamel, Glaze and pigment congress 12-14 october 2009 A. Mirhabibi, " Synthesis of suitable nano SiO2 particles as core in core shell structure materials", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23 A. Mirhabibi, " The effects of three types of deflocculants and the increase in the PH on the rheological behavior of nano carbon/Sic suspensions, At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23 A. Mirhabibi, "Magnetoviscous effect in a maghemite based ferrofluid", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23 A. Mirhabibi, "Preparation and characterization of magnesia catalyst supports using Fe as catalyst from different sources (MgO,MgNO3) for talouring carbon nanotube growth", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23 A. Mirhabibi, "A comparison of nano-particle size measurement by different methods(XRD,TEM,BET)of Mo2N synthesized by gas solid reaction", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23 M. Karbalaie, A. Mirhabibi, Z. Lebaschi, "Optimizing the impact resistance of matrix-free dyneema fiber-reinforced composites", The 1st Int. Conf. on Composites: characterization, fabrication and application (CCFA-1) 15-18 December 2008, Kish Island, Iran A. Mirhabibi, B. Rand, A.V.K. westwook, R. Aghababazadeh, "Effect of natural graphite addition on thermal conductivity of mesophase-graphite composites", The 1st Int. Conf. on Composites: characterization, fabrication and application (CCFA-1) 15-18 December 2008, Kish Island, Iran z. salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, "A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of carbon black suspensions", Int. Meeting on Developments in Materials, Processes and Applications of Nanotechnology, 2008 V.K. Westwood, A. Brown, A. Mirhabibi, "Purification and assessment of multi-walled carbon nanotubes produced via metal-catalysed CVD synthesis", Carbon, Japan, pp394, 2008 M. Namavar, M. Abedinzadeh, A. Mirhabibi, M. Mahdyarfar, R. Aghababazadeh, " Preparation of high surface area granular activated carbon using chemical activation techniques" Carbon, Japan, 2008, pp. 557 Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “A study on the effect of three types of deflocculants and the increase in the PH on the rheological behaviour of carbon black suspensions”, 2nd Int. Meeting on Developments in Materials, Processes & Applications of Nanotechnology, 2008 M. Palizdar, A. Mirhabibi, R. Aghababazadeh, A.P. Brown, “Influence of Fe as a catalyst and MgO sypport on the growth of carbon nanotubes in CCVD method”, Int. Meeting on developments materials, processes & applications of nanotechnology, 2008. E. Ghasemi, A. Mirhabibi, M. Edrisi, R. Aghababazadeh, “Effect of time and temperature on rheological properties of an iron oxide ferrofluid”, Int. meeting on development in materials, 2008 M. palizdar, R. Aghababazadeh, A. Mirhabibi, J. Pourasad, “The effects of MgO source for substrate preparation on the growth of carbon nanontubes by catalytic chemical vapor deposition”, Carbon Conf., 2007 A. Mirhabibi, H.R. Ettelaie, “The study on mild steel corrosion by adding carbon balck and graphite to epoxy paint”, Carbon Conf., 2007 Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions”, Nanotech in sight, 2007 Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH, electrodyte additions and increasing solid concentration on the rheological behaviour of carbon black suspensions”, Carbon 2007 Conf., 2007 Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Mechanical properties of Titanium centrifugal investment casting parts”, Nanotechnisight, 2007 Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions”, Nanotechnisight, 2007 R. Aghababazadeh, A. Mirhabibi, S. Banijamali, J. Pourasad, ” Preparation and characterization of nanocrystalline molybdenium nitride through a Gas-solid reaction”, First Int. Cong. On Nanoscience and Nanotechnology, 2006 M. Bodaghi, A. Mirhabibi, H. Zolfonun, ”Alpha-Fe-Al2O3 nanocomposites prepared by mechanical alloying method”, First Int. Cong. on Nanoscience and Nanotechnology, 2006 A. Mirhabibi, G.A. Moghani, ” Combinatorial enumeration and Q-conjugacy character tables of some chemical molecules”, The Int. Conf. on Carbon, 2006 L. Nikzad, A. Mirhabibi, R. Aghababazadeh,” Tape casting of graphite in non-aqueouse media”, The Int. Conf. on Carbon, 2006 R. Aghababazadeh, A. Mirhabibi, H. Ghanbari, R.M. Brydson, A. Brown, “Study of the samples of carbon nanotubes synthesized on alumina supports with different contents of iron”, The Int. Conf. on Carbon, 2006 S. Rasouli, A. Mirhabibi, Ph. Blanchart, A. Rafiee, “The effect of surfactant on characterization of graphite powder via field flow fractionation (FFF) technique”, 1st Int. and 2nd National Conf. on color Sci. and Tech., 2006 A. Mirhabibi, M. Edrisi, M. Jalili, “Coloration of raw agate : Quantitative and Qualitative analysis”, 1st Int. and 2nd National Conf. on color Sci. and Tech., 2006 G.A. Moghani, A. Mirhabibi, A.R. Ashrafi, M. Ghorbani, “Combinatorial enumeration in copper and silver nanoclusters by subduction of coset representation”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006 F. Doulati, Kh. Badie, Yousefi, Arami, Shafaie, Mahmoodi, A. Mirhabibi, Marandi, “Finite element modeling and experimental studies on the removal of direct red 80 dye from industrial effluents using almond shells, alow-cast adsorbent”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006 M. Esfidari, A. Mirhabibi, S. Rasouli, J. Javadpour, “Synthesis of gold pearlescent pigment based on mica-Tin dioxide”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006 S. Rasouli, A. Mirhabibi, H. Majidian, S. Khatibzadeh, “Characterization of a high polydispers graphite powder using flow programming in gravitational flow fractionation”, 12th Int. Symposium on field – flow fractionation, 2005 R. Aghababazadeh, A. Mirhabibi, H. Ghanbari, “Synthesis of single wall carbon nanotubes on alumina and aluminasilicate supports by CCVD”, Carbon, Korea, 2005 A. Mirhabibi, H. Majidian, M. Ghahari, “Effect of binders on rheological behaviour of aqueous graphite suspensions”, Carbon, Korea, 2005 A. Mirhabibi, R. Aghababazadeh, T. Aminin, M. Edrisi, “Carbon-containing coating for Zinc-Carbon bathery system”, Carbon, Hispania, 2003 F. Doulati, R. Marandi, A. Marandi, A. Mirhabibi, E. Baaki, “Effect of pH and biomass concentrations in the removal of selenite from acid mine drainage by aspergillus niger as biosorbent in Sarcheshmeh porphyry copper mine”, 9th Int. Mine Water Congress A. Mirhabibi, S. Rasouli, M. Esfidari, ” Synthesis of gold pearlescent pigment via heat treatment of mica”, Colour & appearance of paint R. Aghababazadeh, F. Naghizadeh, M. Tamizifar, J. Pourasad, A. Mirhabibi, Neda Ameri, ” Effect of aging on physical and chemical properties of synthesized Tin nanopowder”,