Full Name: Dr. Ramin Hashemi Position: Associat Professor Phone: 98-21-77240540-50     Ex:2996 Fax: 98-21-77240488 Email: rhashemi AT iust.ac.ir Address: Iran University of Science & Technology, Tehran, IRAN

Education

Ph.D.: Mechanical Engineering, Manufacturing and Production

University of Tehran, Tehran, Iran 

M. Sc.: Mechanical Engineering, Applied Mechanics

Sharif University of Technology, Tehran, Iran 

B. Sc.: Mechanical Engineering, Solid Mechanics

K. N. Toosi University of Technology Tehran, Iran

Research interest

• Applied plasticity and mechanics of metal forming
• Design and manufacturing
• Nanotechnology

 Full Publication List at Google Scholar  

 My ORCiD: https://orcid.org/0000-0001-8369-0390 
 My SCOPUS: https://www.scopus.com/authid/detail.uri?authorId=24341411300
 My Web of Science ResearcherID: H-3122-2017
 

1. Hedayati, N., & Hashemi, R. (2020). Some practical aspects of digital image correlation technique to evaluate anisotropy coefficient and its comparison with traditional method. Journal of Testing and Evaluation, 48(6).‏
2. Hashemi, R., Habibi, M., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2020). Transmit Power Optimization in Optical Coherent Transmission Systems: Analytical, Simulation, and Experimental Results. arXiv preprint arXiv:2002.07626.‏
3. Gholami, M. D., Hashemi, R., & Sedighi, M. (2020). The effect of temperature on the mechanical properties and forming limit diagram of aluminum strips fabricated by accumulative roll bonding process. Journal of Materials Research and Technology, 9(2), 1831-1846.‏
4. Tayyebi, M., Rahmatabadi, D., Adhami, M., & Hashemi, R. (2020). Manufacturing of high-strength multilayered composite by accumulative roll bonding. Materials Research Express, 6(12), 1265e6.‏
5. Kazemi, F., Hashemi, R., & Niknam, S. A. (2020). Formability and fractography of AA5754/polyethylene/AA5754 sandwich composites. Mechanics Based Design of Structures and Machines, 1-15.‏
6. Bozcheloei, J. E., Sedighi, M., & Hashemi, R. (2019). The effect of temperature on the mechanical properties and forming limit diagram of Al 5083 produced by equal channel angular rolling. The International Journal of Advanced Manufacturing Technology, 105(10), 4389-4400.‏
7. Valinezhad, M., Etemadi, E., Hashemi, R., & Valinezhad, M. (2019). Experimental and FE analysis on spring-back of copper/aluminum layers sheet for a L-die bending process. Materials Research Express, 6(11), 1165h4.
8. Ghazanfari, A., Soleimani, S. S., Keshavarzzadeh, M., Habibi, M., Assempuor, A., & Hashemi, R. (2019). Prediction of FLD for sheet metal by considering through-thickness shear stresses. Mechanics Based Design of Structures and Machines, 1-18.
9. Tayyebi, M., Rahmatabadi, D., Adhami, M., & Hashemi, R. (2019). Influence of ARB technique on the microstructural, mechanical and fracture properties of the multilayered Al1050/Al5052 composite reinforced by SiC particles. Journal of Materials Research and Technology, 8(5), 4287-4301.‏
10. Rahmatabadi, D., Hashemi, R., Tayyebi, M., & Bayati, A. (2019). Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn. Materials Research Express, 6(9), 096543.‏
11. Alipour, M., Torabi, M. A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., ... & Hashemi, R. (2019). Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels. Mechanics Based Design of Structures and Machines, 1-17.‏
12. Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572.‏
13. Rahmatabadi, D., Shahmirzaloo, A., Hashemi, R., & Farahani, M. (2019). Using digital image correlation for characterizing the elastic and plastic parameters of ultrafine-grained Al 1050 strips fabricated via accumulative roll bonding process. Materials Research Express, 6(8), 086542.‏
14. Kasaeian-Naeini, M., Hashemi, R., & Hosseini, A. (2019). Lubrication performance of rapeseed oil-based nano-lubricants in parallel tubular channel angular pressing process. Journal of Central South University, 26(5), 1042-1049.‏
15. Googarchin, H. S., Teimouri, B., & Hashemi, R. (2019). Analysis of constrained groove pressing and constrained groove pressing-cross route process on AA5052 sheet for automotive body structure applications. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(6), 1436-1452.‏
16. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., Tayyebi, M., & Hashemi, R. (2019). Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC. Materials Science and Engineering: A, 753, 70-78.‏
17. Pahlavani, M., Marzbanrad, J., Rahmatabadi, D., Hashemi, R., & Bayati, A. (2019). A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM. Materials Research Express, 6(7), 076554.‏
18. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., Tayyebi, M., & Hashemi, R. (2019). Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC. Materials Science and Engineering: A, 753, 70-78.‏
19. Hadiyan, B., Hashemi, R., & Akbari, H. (2019). Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification. Journal of Advanced Materials and Processing, 7(1), 22-30.‏
20. Ebrahimi Keshmarzi, H., Hashemi, R., & Madoliat, R. (2019). Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis. ADMT Journal, 12(1), 51-58.‏
21. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., & Hashemi, R. (2019). Characterization of the Plastic and Elastic Properties of Aluminum Sheet Produced by CRB Process via DIC Method. Modares Mechanical Engineering, 19(2), 505-513.‏
22. Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). 旋切钛基复合材料 (Ti-MMC) 的超细微粒粉尘排放 (英文). Journal of Central South University, (6), 19.‏
23. Najafizadeh, N., Rajabi, M., Hashemi, R., & Amini, S. (2019). Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming. Journal of Theoretical and Applied Vibration and Acoustics, 5(1), 1-10.
24. Saberi, M., Niknam, S. A., & Hashemi, R. (2019). On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment.‏
25. Motamedi, M. A., & Hashemi, R. (2019). Evaluation of Temperature Effects on Forming Limit Diagrams of AA6061-T6 Considering the Marciniak and Kuczynski Model. Journal of Testing and Evaluation, 49(2).‏
26. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2019).Experimental evaluation of the plane stress fracture toughness for ultra-fine grained Al/Al specimens prepared by accumulative roll bonding process.
27. Kasaeian-Naeini, M., Hashemi, R., & Hosseini, A. (2019). Lubrication performance of rapeseed oil-based nano-lubricants in parallel tubular channel angular pressing process. Journal of Central South University, 26(5), 1042-1049.‏
28. Rahmatabadi, D., Hashemi, R., Tayyebi, M., & Bayati, A. (2019). Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn. Materials Research Express, 6(9), 096543.
29. Ebrahimi Keshmarzi, H., Hashemi, R., & Madoliat, R. (2019). Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis. ADMT Journal, 12(1), 51-58.‏
30. Mousavi, F., Erfanian, M., Hashemi, R., & Madoliat, R. (2018). Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets. Journal of Advanced Materials and Processing, 6(3), 66-79.‏
31. Fallah Tafti, M., Sedighi, M., & Hashemi, R. (2018). Effects of Natural Aging Treatment on Mechanical, Microstructural and Forming Properties of Al 2024 Aluminum Alloy Sheets. Iranian Journal of Materials Science and Engineering, 15(4), 1-10.‏
32. Rahmatabadi, D., Pahlavani, M., Bayati, A., Hashemi, R., & Marzbanrad, J. (2018). Evaluation of fracture toughness and rupture energy absorption capacity of as-rolled LZ71 and LZ91 Mg alloy sheet. Materials Research Express, 6(3), 036517.‏
33. Erfanian, M., & Hashemi, R. (2018). A comparative study of the extended forming limit diagrams considering strain path, through-thickness normal and shear stress. International Journal of Mechanical Sciences, 148, 316-326.‏
34. Rahmatabadi, D., Mohammadi, B., Hashemi, R., & Shojaee, T. (2018). An experimental study of fracture toughness for nano/ultrafine grained Al5052/Cu multilayered composite processed by accumulative roll bonding. Journal of Manufacturing Science and Engineering, 140(10).‏
35. Rahmatabadi, D., Tayyebi, M., Sheikhi, A., & Hashemi, R. (2018). Fracture toughness investigation of Al1050/Cu/MgAZ31ZB multi-layered composite produced by accumulative roll bonding process. Materials Science and Engineering: A, 734, 427-436.‏
36. Bostan Shirin, M., Hashemi, R., & Assempour, A. (2018). Analysis of deep drawing process to predict the forming severity considering inverse finite element and extended strain-based forming limit diagram. Journal of Computational & Applied Research in Mechanical Engineering (JCARME), 8(1), 39-48.‏
37. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R., & Assempour, A. (2018). Forming limit diagrams by including the M–K model in finite element simulation considering the effect of bending. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636.‏
38. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Faraji, G. (2018). Evaluation of microstructure and mechanical properties of Al5052/Cu multi-layered composite fabricated by the ARB process. Powder Metall. Met. Ceram.‏
39. Mousavi, F., Hashemi, R., & Madoliat, R. (2018). Measurement of directional anisotropy coefficients for AA7020-T6 tubes and prediction of forming limit curve. The International Journal of Advanced Manufacturing Technology, 96(1-4), 1015-1023.‏
40. Hashemi, R., & Karajibani, E. (2018). Forming limit diagram of Al-Cu two-layer metallic sheets considering the Marciniak and Kuczynski theory. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(5), 848-854.‏
41. Nasiri, S. M., Basti, A., Hashemi, R., & Darvizeh, A. (2018). Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria. International Journal of Mechanical Sciences, 137, 15-23.‏
42. Habibi, M., Hashemi, R., Tafti, M. F., & Assempour, A. (2018). Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. Journal of Manufacturing Processes, 31, 310-323.‏
43. Tayyebi, M., Rahmatabadi, D., Rashidi, R., & Hashemi, R. (2018). Evaluation of mechanical properties and microstructure for Al/Ni% 5 produced by cross accumulative roll bonding process.‏
44. Abdollahi, B. S. B., Esmaeili, B. M., Afzali, D., & Hashemi, R. (2018). Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater.‏
45. Mousavi, F., Erfanian, M., Hashemi, R., & Madoliat, R. (2018). Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets. Journal of Advanced Materials and Processing, 6(3), 66-79.‏
46. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Faraji, G. (2018). Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces. International Journal of Minerals, Metallurgy, and Materials, 25(5), 564-572.‏
47. Rahimi, H. R., Sedighi, M., & Hashemi, R. (2018). Forming limit diagrams of fine-grained Al 5083 produced by equal channel angular rolling process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(11), 922-930.‏
48. Habibi, M., Hashemi, R., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2018, December). Comparing Nonlinearity Effects of SMF and NZ-DSF fibers on the Performance of Optical Coherent Transmission Systems. In 2018 Fifth International Conference on Millimeter-Wave and Terahertz Technologies (MMWaTT) (pp. 54-57). IEEE.‏
49. Hashemi, R., Habibi, M., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2018, December). Power Allocation in Optical Coherent Transmission Systems Using Discretized-Enhanced Gaussian Noise Model. In 2018 9th International Symposium on Telecommunications (IST) (pp. 342-347). IEEE.‏
50. Abdollahi, B. S. B., Esmaeili, B. M., Afzali, D., & Hashemi, R. (2018). Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater.
51. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experimental evaluation of the plane stress fracture toughness for ultra-fine grained aluminum specimens prepared by accumulative roll bonding process. Materials Science and Engineering: A, 708, 301-310.‏
52. Hashemi, R. (2017). Survey the effect of forming speed on fld for Al 6061 sheets. Modares Mechanical Engineering, 17(10), 333-340.‏
53. Javidikia, M., & Hashemi, R. (2017). Mechanical anisotropy in ultra-fine grained aluminium tubes processed by parallel-tubular-channel angular pressing. Materials Science and Technology, 33(18), 2265-2273.‏
54. Rahmatabadi, D., & Hashemi, R. (2017). Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding. International Journal of Materials Research, 108(12), 1036-1044.‏
55. Javidikia, M., & Hashemi, R. (2017). Analysis and simulation of parallel tubular channel angular pressing of Al 5083 tube. Transactions of the Indian Institute of Metals, 70(10), 2547-2553.
56. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Eghbali, B. (2017). Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process. Modares Mechanical Engineering, 17(7), 180-184.‏
57. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process. Modares Mechanical Engineering, 17(2), 101-108.‏
58. Karajibani, E., Hashemi, R., & Sedighi, M. (2017). Forming limit diagram of aluminum-copper two-layer sheets: Numerical simulations and experimental verifications. The International Journal of Advanced Manufacturing Technology, 90(9-12), 2713-2722.‏
59. Rahmatabadi, D., & Hashemi, R. (2017). Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test. Modares Mechanical Engineering, 17(3), 451-454.‏
60. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process. Modares Mechanical Engineering, 17(2), 101-108.‏
61. Marandi, F. A., Jabbari, A. H., Sedighi, M., & Hashemi, R. (2017). An Experimental, analytical, and numerical investigation of hydraulic bulge test in two-layer Al–Cu Sheets. Journal of Manufacturing Science and Engineering, 139(3).‏
62. Afshar, A., Hashemi, R., Madoliat, R., Rahmatabadi, D., & Hadiyan, B. (2017). Numerical and experimental study of bursting prediction in tube hydroforming of Al 7020-T6. Mechanics & Industry, 18(4), 411.‏
63. Hedayati, N., Madoliat, R., & Hashemi, R. (2017). Strain measurement and determining coefficient of plastic anisotropy using digital image correlation (DIC). Mechanics & Industry, 18(3), 311.‏
64. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R., & Hashemi, R. (2017). Determination of forming limit diagram using two modified finite element models. Mech Eng, 48(4), 141-144.‏
65. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experimental evaluation of the plane stress fracture toughness for ultra-fine grained.
66. Rahmatabadi, D., & Hashemi, R. (2016). Experimental investigation of fracture surfaces and mechanical properties of AA1050 aluminum produced by accumulative roll bonding process. Modares Mechanical Engineering, 16(10), 305-312.‏
67. Karajibani, E., Hashemi, R., & Sedighi, M. (2016). Determination of forming limit curve in two-layer metallic sheets using the finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(6), 1018-1029.‏
68. Mirfalah-Nasiri, S. M., Basti, A., & Hashemi, R. (2016). Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate. International Journal of Mechanical Sciences, 117, 93-101.‏
69. Tayebi, M., Moghadasi, H., Rahmatabadi, D., Mohemi, E., & Hashemi, R. (2016). Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study. Journal of Modern Processes in Manufacturing and Production, 5(3), 13-21.‏
70. Hashemi, R., Madoliat, R., & Afshar, A. (2016). Prediction of forming limit diagrams using the modified MK method in hydroforming of aluminum tubes. International Journal of Material Forming, 9(3), 297-303.‏
71. Rahimi, H. R., Sedighi, M., & Hashemi, R. (2018). Forming limit diagrams of fine-grained Al 5083 produced by equal channel angular rolling process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(11), 922-930.‏
72. Ghazanfari, A., Assempour, A., Habibi, M., & Hashemi, R. (2016). Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak–Kuczynski model. Modares Mechanical Engineering, 16(1), 137-143.‏
73. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A., & Lashini, H. (2016). Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures. Journal of Materials Engineering and Performance, 25(2), 382-389.‏
74. Hashemi, R., Abrinia, K., Assempour, A., Khakpour Nejadkhaki, H., & Shahbazi Mastanabad, A. (2016). Forming limit diagram of tubular hydroformed parts considering the through-thickness compressive normal stress. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(1), 332-343.‏
75. Karajibani, E., Hashemi, R., & Sedighi, M. (2016). Experimental determination of forming limit diagram in Aluminum-Copper twolayer metallic sheets. Science and Technology of Composites, 2(4), 45-50.2015.
76. Abdolvand, H., Faraji, G., Givi, M. B., Hashemi, R., & Riazat, M. (2015). Evaluation of the microstructure and mechanical properties of the ultrafine grained thin-walled tubes processed by severe plastic deformation. Metals and Materials International, 21(6), 1068-1073.‏
77. Mirfalah Nasiri, S. M., Basti, A., & Hashemi, R. (2015). Numerical analysis of the effect of advanced yield criterion on prediction of strains and stresses in anisotropic aluminum sheets. Modares mechanical engineering, 15(8), 393-401.‏
78. Hashemi, R., Yousefi, S., & Faraji, M. (2015). Experimental studying of the effect of active area on the performance of passive direct methanol fuel cell. Ionics, 21(10), 2851-2862.‏
79. Karajibani, E., Fazli, A., & Hashemi, R. (2015). Numerical and experimental study of formability in deep drawing of two-layer metallic sheets. The International Journal of Advanced Manufacturing Technology, 80(1-4), 113-121.‏
80. Hashemi, R., Abrinia, K., & Faraji, G. (2015). A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(9), 1537-1547.‏
81. Hashemi, R., Jalili, I., & Abdolmohammadi, M. (2015). Experimental test and finite element analysis of line heating method for forming of ship hull steel plates. Modares Mechanical Engineering, 14(16), 9-16.
82. Marandi, F. A., Jabbari, A. H., Sedighi, M., & Hashemi, R. (2015). Analytical and numerical investigation of Bulge test in bimetallic sheets.‏
83. Zhalehfar, F., Hashemi, R., & Hosseinipour, S. J. (2015). Experimental and theoretical investigation of strain path change effect on forming limit diagram of AA5083. The International Journal of Advanced Manufacturing Technology, 76(5-8), 1343-1352.‏
84. Karajibani, E., Hashemi, R., & Sedighi, M. (2015). A Novel Methodology to Determination of Forming Limit Curve in Two-Layer Metallic Sheets Based on Numerical Models.‏
85. Karajibani, E., Hashemi, R., & Fazli, A. (2015). An Analysis of the Formability of Two-Layer Metallic Sheets by the Experiment and Finite Element Method.‏
86. Khakpour, H., Hashemi, R., & Assempour, A. (2015). Prediction of Noral Stress Effect on Forming Limit Diagrams.‏
87. Zendehboudi, A. R., & Hashemi, R. (2015). Fabrication and experimental study of regeneration temperature, rotational speed and inlet air humidity on the performance of a desiccant wheel. Iranian Journal of Science and Technology Transactions of Mechanical Engineering, 39(M2), 451-458.‏
88. Haj Hosseini, M., & Hashemi, R. A. M. I. N. (2016). Addicts' quality of life and psychological disorders (depression, anxiety, and stress) in two treatment methods: narcotics anonymous vs. methadone maintenance treatment. Research on addiction, 9(35), 119-136.‏
89. Hashemi, R., Mamusi, H., & Masoumi, A. (2014). A simulation-based approach to the determination of forming limit diagrams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(12), 1582-1591.‏
90. Hashemi, R., & Abrinia, K. (2014). Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress. Materials & Design (1980-2015), 54, 670-677.‏
91. Hashemi, R. (2014). Analysis of necking in tube hydroforming by means of extended forming limit stress diagram. Engineering Solid Mechanics, 2(2), 73-82.‏
92. Borazjani, M. S., Bamdad, M., & Hashemi, R. (2014). Numerical investigation on the single phase forced convection heat transfer characteristics of Al2o3 nanofluids in a double-tube counter flow heat exchanger. International Journal of Basic Sciences and Applied Research, 3, 266-273.‏
93. Mamusi, H., Masoumi, A., Hashemi, R., & Mahdavinejad, R. (2013). A novel approach to the determination of forming limit diagrams for tailor-welded blanks. Journal of Materials Engineering and Performance, 22(11), 3210-3221.‏
94. Hashemi, R., Ghazanfari, A., Abrinia, K., & Assempour, A. (2013). The Effect of the Imposed Boundary Rate on the Formability of Strain Rate Sensitive Sheets Using the M-K Method. Journal of Materials Engineering and Performance, 22(9), 2522-2527.‏
95. Hashemi, R., Abrinia, K., & Assempour, A. (2013). The strain gradient approach to predict necking in tube hydroforming. Journal of Manufacturing Processes, 15(1), 51-55.‏
96. Abad, M. K. (2013). Loading Path Determination for Tube Hydroforming Process of Automotive Component Using APDL. International Journal of Automotive Engineering, 3(4), 555-563.‏
97. Hashemi, R., Ghazanfari, A., Abrinia, K., & Assempour, A. (2012). Forming limit diagrams of ground St14 steel sheets with different thicknesses. SAE International Journal of Materials and Manufacturing, 5(1), 60-64.‏
98. Jamali, G., Raeesi, R., Hashemi, R. (20011). Identifying key success factors in strategic management of supply chain and the interrelations of these factors. In 2011 2nd IEEE International Conference on Emergency Management and Management Sciences.‏
99. Valinezhada, M., Etemadia, E., Hashemi, R., & Valinezhadc, M. (2011). Experimental and FE analysis on spring-back of copper/aluminum. Journal of Advanced Manufacturing Technology, 54(1-4), 93-111.‏
100. Faraji, G., Mashhadi, M. M., & Hashemi, R. (2010). Using the finite element method for achieving an extra high limiting drawing ratio (LDR) of 9 for cylindrical components. CIRP Journal of Manufacturing Science and Technology, 3(4), 262-267.‏
101. Faraji, G. H., Hashemi, R., Mashhadi, M. M., Dizaji, A. F., & Norouzifard, V. (2010). Hydroforming limits in metal bellows forming process. Materials and Manufacturing Processes, 25(12), 1413-1417.‏
102. Assempour, A., Nejadkhaki, H. K., & Hashemi, R. (2010). Forming limit diagrams with the existence of through-thickness normal stress. Computational Materials Science, 48(3), 504-508.
103. Hashemi, R., Faraji, G., Abrinia, K., & Dizaji, A. F. (2010). Application of the hydroforming strain-and stress-limit diagrams to predict necking in metal bellows forming process. The International Journal of Advanced Manufacturing Technology, 46(5-8), 551-561.‏
104. Hashemi, R., Assempour, A., & Abad, E. M. K. (2009). Implementation of the forming limit stress diagram to obtain suitable load path in tube hydroforming considering M–K model. Materials & Design, 30(9), 3545-3553.‏
105. Assempour, A., & Hashemi, R. (2009). Finding the optimum Hill index in the determination of the forming limit diagram. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(7), 943-944.
106. Assempour, A., Hashemi, R., Abrinia, K., Ganjiani, M., & Masoumi, E. (2009). A methodology for prediction of forming limit stress diagrams considering the strain path effect. Computational materials science, 45(2), 195-204.‏
107. Safikhani, A. R., Hashemi, R., & Assempour, A. (2009). Some numerical aspects of necking solution in prediction of sheet metal forming limits by strain gradient plasticity. Materials & Design, 30(3), 727-740.‏
108. Assempour, A., Safikhani, A. R., & Hashemi, R. (2009). An improved strain gradient approach for determination of deformation localization and forming limit diagrams. Journal of materials processing technology, 209(4), 1758-1769.
109. Safikhani, A. R., Hashemi, R., & Assempour, A. (2008). The strain gradient approach for determination of forming limit stress and strain diagrams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(4), 467-483.‏