Dr. Abolfazl Ahmadi
| Post date: 2016/07/10 |
Dr. Abolfazl Ahmadi
Associate Professor
School of New Technologies
Department of Energy Systems Engineering
Iran University of Science and Technology
Email : a_ahmadiiust.ac.ir
My Citation in Google Scholar
Website :http://webpages.iust.ac.ir/a_ahmadi
Tel : 73225832
Fax: 73021623
Qualifications
- B.sc (Ferdousi Mashhad 1986)
- M.Sc ( Sharif University of Technology, 1992)
- Ph. D (The University of Sheffield-England 2006)
Taught Courses
- Thermodynamics 1 & 2 ( Undergraduate)
- Fluid Mechanics 1 & 2 ( Undergraduate)
- Heat Transfer 1 & 2 ( Undergraduate)
- Power Plant ( Undergraduate)
- HVAC Systems (Undergraduate)
- Advanced Thermodynamcs ( Graduate)
- Advanced Fluid Mechanics ( Graduate)
- Computational Fluid Dynamics ( Graduate)
- Thermal Energy Optimization ( Graduate)
- Selected Topics ( Graduate)
- Advanced Heat Transfer ( Graduate)
- Energy Modeling ( Graduate)
Research Intrests
- Modelling of Thermal Hydrulic Systems
- Simuation of CCHP Systems
- Simulation of Hybrid Energy Systems
- Optimization of Energy Systems
- Energy Storage Systems
- Renewable Energies
ISI Papers
- A.Ahmadi, D.H.Jamali, M.A.Ehyaei, M. El HajAssad, "Energy, exergy, economic and exergoenvironmental analyses of gas and air bottoming cycles for production of electricity and hydrogen with gas reformer",Journal of Cleaner Production Volume 259, 20 June 2020, 120915 , https://doi.org/10.1016/j.jclepro.2020.120915
- A.Ehyaei, A.Ahmadi, M.El Haj Assad, Marc A.Rosen, "Investigation of an integrated system combining an Organic Rankine Cycle and absorption chiller driven by geothermal energy: Energy, exergy, and economic analyses and optimization" Journal of Cleaner Production, Volume 258, 10 June 2020, 120780, https://doi.org/10.1016/j.jclepro.2020.120780
- R. Azadbakhti, F. Pourfattah, A. Ahmadi, O. Alii Akbari, D. Toghraie, "Eulerian–Eulerian multi-phase RPI modeling of turbulent forced convective of boiling flow inside the tube with porous medium", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30 No. 5, 2020, pp. 2739-2757, https://doi.org/10.1108/HFF-03-2019-0194
- Ravinder Kumar, Kshitij Ojha, Mohammad H. Ahmadi, Ritu Raj,Mehdi Aliehyaei, Abolfazl Ahmadi and Narjes Nabipour , "A review status on alternative arrangementsof power generation energy resources and reserve in India", International Journal of Low-Carbon Technologies 2019, 00, 1–17, doi:10.1093/ijlct/ctz066
- A. Ahmadi and M. A. Ehyaei, "Development of a Simple Model to Estimate Entropy Generation of Earth", ournal of Renewable Energy Research and Application (RERA), 2 Dec. 2019, DOI:10.22044/rera.2019.8982.1011
- A. Ahmadi, F. Esmaeilion, A. Esmaeilion, M. A. Ehyaei and J. L. Silveira, "Benefits and Limitations of Waste-to-Energy Conversion in Iran", Journal of Renewable Energy Research and Application (RERA), Vol 1, No 1, 2019, 27-45, DOI: 10.22044/RERA.2019.8666.1007
- M. Shaygan , M.A. Ehyaei , ∗, A. Ahmadi, M. El Haj Assad, José Luz Silveira, "Energy, exergy, advanced exergy and economic analyses of hybrid polymer electrolyte membrane (PEM) fuel cell and photovoltaic cells to produce hydrogen and electricity" ,Journal of Cleaner Production 234 (2019) 1082-1093, https://doi.org/10.1016/j.jclepro.2019.06.298
- M.A. Ehyaei , A. Ahmadi , M. El Haj Assad , Tariq Salameh, "Optimization of parabolic through collector (PTC) with multi objective swarm optimization (MOPSO) and energy, exergy and economic analyses", Journal of Cleaner Production 234 (2019) 285-296, https://doi.org/10.1016/j.jclepro.2019.06.210
- M.A. Ehyaei,⁎, A. Ahmadi, M. El Haj Assad, A.A. Hachicha, Z. Said, "Energy, exergy and economic analyses for the selection of working fluid and metal oxide nanofluids in a parabolic trough collector", Solar Energy 187 (2019) 175–184, https://doi.org/10.1016 /j.solener.2019.05.046
- M.A. Ehyaei,⁎, A. Ahmadi, Mar A. Rosen, "Energy, exergy, economic and advanced and extended exergy analyses of a wind turbine", Energy Conversion and Management 183 (2019) 369–381, https://doi.org/10.1016/j.enconman.2019.01.008
- M. Shamushaki , F.Ghanatir , M. A. Ehyaei , A.Ahmad “Exergy and exergoeconomic analysis and multi-objective optimization of gas turbine power plant by Evolutionary Algorithms; Case study: Aliabad Katoul power plant” International Journal of Exergy Vol. 22, N0 3 , 2017 (ISI Journal)
- A. Yazdi, M. A. Ehyaei, A. Ahmadi “ OPTIMIZATION OF MICRO COMBINED HEAT AND POWER GAS TURBINE BY GENETIC ALGORITHM”, THERMAL SCIENCE, Vol. 19, No. 1, pp. 207-218, 2015 ( ISI Jornal)
- S.Sh.Hosseini, N. M. Adam, B. Z. Azmi, A. Ahmadi, A.Shahjerdi, “Measuring Thermal Conductivity of Nanofluids by New Method” Australian Journal of Basic and Applied Sciences, 5(9) : 985-996, 2011(ISI Journal)
-
M. A. Ehyaei, A. Mozafari, A. Ahmadi, P. Esmaeili, M. Shayesteh, M. Sarkhosh, E. Dincer, “Potential use of cold thermal energy storage systems for better efficiency and cost effectiveness”, Energy and Building Journal (ISI Journal), Volume 42, Issue 12, Dec. 2010, P 2296-2303
- A. Mozafari, A. Ahmadi, M. A. Ehyaei, "Optimisation of Micro Gas Turbine by Exergy, Economic and Environmental (3E) Analysis" International Journal of Exergy ( ISI Journal) , Vol. 7, No. 1, pp 457-476 , 2010
- A. Ahmadi, M. A. Ehyaei, “ Exergy analysis of a wind turbine” International Journal of Exergy ( ISI Journal) , Vol. 6, No. 4, pp 457-476 , 2009
- A. Ahmadi, “ Experimental study of a new flow conditioner on disturbed flow in orifice plate metering” Journal of Fluids Engineering ( ISI Journal), Vol. 131, Issue 5, pp 051104-1051104-8
Comference Papers
- A.Ahmadi, “Review of the new approaches to Develop Energy efficiency in Buildings” BIT’s 1st Annual World Congress of EnergyWise(WEW2012), Sep. 24-26 2012, Taiyuan, China, (Key speaker)
- A. Ahmadi, “ Exergy Optimisation of the Wind Turbine”, 7th Conference on Sustainable of the Energy, Water and Environment Systems, July 1-6, 2012, Ohrid, Republic of Macedonia
- A.Ahmadi, “ Exergy Optimization of the PEFC Fuel Cell”, The Energy and Materials Research Conference-EMR 2012, 20-22 June 2012, Spain
- S.Sh.Hosseini, N. M. Adam, B. Z. Azmi, A. Ahmadi, A.Shahjerdi, “Measuring Thermal Conductivity of Nanofluids by New Method” Australian Journal of Basic and Applied Sciences, 5(9) : 985-996, 2011(ISI Journal)
- A. Ahmadi, M. A. Ehyaei, M. Omrani, “Optimazation and design of the V94.2 gas turbine by using energy, exergy and economic analysis” 16th Annual (International) Conference on Mechanical Engineering- ISME 2008 May 14-16, 2008, Shahid Bahonar University, Kerman, Iran.
- A. Amadi, “Application of the New Flow Conditioner for Orifice Plate Flowmeter”, Middle East Mechanical EXPO (Technical Conference and Exhibition), 4 – 7, November 2007, Gulf International Convention Centre, Gulf Hotel, Manama, Kingdom of Bahrain
- A. Ahmadi, S.M. Beck, “Computational analysis of the orifice plate with a swirler flow conditioner”, The 14 Annual (International) Conferences of Mechanical Engineering, Isfahan, Iran, May 17-19, 2006
- A. Ahmadi, S. M. Beck, “The Swirling Orifice Plate, a Flowmeter for all Reasons”, ASME Fluid Engineering Summer conference, 19-23 June, 2005, Houston, Texas, USA,
- A. Ahmadi, S. M. Beck, “Experimental study of the orifice plate with a cone swirler flow conditioner”, The 13 Annual (International) Conferences of Mechanical Engineering, 17-19 May , 2005, Isfahan, Iran
- A. Ahmadi, S. M. Beck, R. Stanway, “Effect of Diameter Ratio on The Swirling Orifice Plate”, Seventh Triennial International Symposium on Fluid Control, Measurement and Visualization, 25-28 August, 2003 Sorrento, Italy
- M. A. Ehyaei, A. Mozafari, A. Ahmadi, P. Esmaeili, M. Shayesteh, M. Sarkhosh, E. Dincer, “Potential use of cold thermal energy storage systems for better efficiency and cost effectiveness” The Second International Conference on Nuclear and Renewable Energy Resources, 4-7 July 2010, Ankara, Turkey
- H. Kaviar, A. Ahmadi, “Judicial Jurisdiction Solution for Electronic Consumer Contracts in European :::::::::::::union:::::::::::::” World Academy of Science, Engineering and Technology Journal (WASET), Issue 66, June 2010, P 706-713
- S. Sh. Hosseini, Adam, A. Ahmadi, N. M. Azmi, A. Shahrjerdi, “ A Model to predict the thermal diffusivity of aqueous nana-fluids” Australian Journal of Basic and Applied sciences, 2010
- ُS. Sh. Hosseini, N.M. Adam, A. Ahmadi, B. Z. Azmi, K. Gudarzi, “ New method of measuring thermal conductivity of nano-fluids” Australian Journal of Basic and Applied sciences, 2010
- S.Sh. Hosseini, N.M. Adam, Z. Azmi, A. Ahmadi “ Effect of Temerture Increasing on Nanofluids Structure” 2nd International Conference on Computer Engineering and Technology (ICCET 2010), 16-18 April 2010, Volume 5, P 527-530, Chengdu, China
- M.H. Shojaeefard, A.ahmadi, K. Goudarzi, M. Fazelpour, “ Identification of black-box linear models: the case study of the thermal periodic contact of exhaust valves in Internal Combustion Engines”, 12-14 January, 2009, The Petroleum Institute, Abu Dhabi, UAE
- A. Amadi, M. A. Ehyaei, “EXERGY ANALYSIS A 5KW POLYMER ELECTROLYTE FUEL CELL (PEFC) WITH COGENERATION”, Sixth International Fuel Cell Science, Engineering and Technology Conference June 16-18, 2008, Denver, Colorado, USA
- A. Amadi, M. A. Ehyaei, “CASE STUDY OF EXERGY OPTIMIZATION OF A WIND TURBINE IN IRAN”, The 19th International Symposium on Transport Phenomena, 17-20 August, 2008, Reykjavik, ICELAND.
- A. Amadi, M. A. Ehyaei, “ENERGY, ECONOMIC AND ENVIROMENTAL (3E) ANALYSIS OF A MICRO GAS TURBINE EMPLOYED FOR ON-SITE COMBINED HEAT AND POWER PRODUCTION”, The 19th International Symposium on Transport Phenomena, 17-20 August, 2008, Reykjavik, ICELAND.
- S. M. Taghvaei, A. Ahmadi, S. B. M. Beck, W. J. Staszewski, “Orthogonal Wavelet Transform Analysis for Leak Detection in Pipelines” , 16th Annual (International) Conference on Mechanical Engineering- ISME 2008 May 14-16, 2008, Shahid Bahonar University, Kerman, Iran