Automotive Science and Engineering
Iran University of Science & Technology
Sat, Nov 30, 2024
[Archive]
Volume 3, Issue 1 (3-2013)
ASE 2013, 3(1): 328-342 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Pashazadeh, Masoumi, Teimournezhad. A 3D Numerical Model to Investigate Mechanical, Thermal and Material Flow Characteristics in Friction Stir Welding of Copper Sheets. ASE 2013; 3 (1) :328-342
URL: http://www.iust.ac.ir/ijae/article-1-179-en.html
URL: http://www.iust.ac.ir/ijae/article-1-179-en.html
Abstract: (23293 Views)
The objective of this study was to develop a numerical model for the prediction of temperature distribution,
effective plastic strain distribution, and especially material flow in friction stir welding of copper plates.
The DEFORM-3D software was used by incorporating a lagrangian incremental formulation. Threedimensional
results of the material flow pattern which were extracted using the point tracking are in good
agreement with the experiment. It was shown that the main part of material flow occurs near the top
surface. Material near the top surface at the behind of tool stretches from retreating side towards advancing
side which leads to non-symmetrical shape of the stir zone. The stir zone shape in FSW of copper alloys,
which was predicted by simulation, does not lean completely towards any sides of welding line.
Keywords: Finite element modeling, Friction stir welding, Material flow, Temperature distribution, Strain distribution
Type of Study: Research |
Subject:
Internal Combustion Engines (ICE, ...)
Send email to the article author
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
