Automotive Science and Engineering
Iran University of Science & Technology
Tue, Dec 3, 2024
[Archive]
Volume 3, Issue 4 (12-2013)
ASE 2013, 3(4): 564-576 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Esfahanian, Mahmoodian, Amiri, Masih Tehrani, Nehzati, Hejabi et al . Large Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method. ASE 2013; 3 (4) :564-576
URL: http://www.iust.ac.ir/ijae/article-1-243-en.html
URL: http://www.iust.ac.ir/ijae/article-1-243-en.html
Abstract: (25451 Views)
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid
Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series
resistor and two RC parallel networks is considered. The accuracy and the response time of the model for
use in an HEV simulator are studied. The battery parameters identification and model validation tests are
performed in low current with a good accuracy. Similar test process is implemented in high current for
another cell and the simulation is verified with experimental results. The validation tests confirm the
accuracy of the model for use in HEV simulator. Finally, the battery model is used to model a Vehicle, Fuel
and Environment Research Institute (VFERI) hybrid electric city bus using ADVISOR software and its
compatibility with other components of the vehicle simulator are demonstrated in a drive cycle test.
Keywords: Battery modeling, Equivalent circuit method, Lithium Polymer battery, High current test, Hybrid electric vehicle
Type of Study: Research |
Subject:
Internal Combustion Engines (ICE, ...)
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
