Mr Mehran Nazemian, Mr Mehrdad Nazemian, Mr Mahdi Hosseini Bohloli, Mr Hadi Hosseini Bohloli, Mr Mohammad Reza Hosseinitazek,
Volume 14, Issue 3 (9-2024)
Abstract
This study investigates the influence of nozzle hole diameter (NHD) variations on spray dynamics, combustion efficiency, and emissions in a Reactivity-Controlled Compression Ignition (RCCI) engine using Computational Fluid Dynamics (CFD) simulations with the CONVERGE software. The study systematically examines NHDs ranging from 130 µm to 175 µm and evaluates their impact on key parameters such as injection pressure, droplet formation, Sauter Mean Diameter (SMD), and evaporation rates. The results demonstrate that reducing NHD to 130 µm significantly enhances fuel atomization by reducing SMD to 15.49 µm and increasing droplet number by 24%, which in turn accelerates evaporation and improves fuel-air mixing. These effects shorten ignition delays, accelerate combustion, and increase peak cylinder pressures and temperatures. Optimal NHDs (150–160 µm) achieve the highest combustion efficiency (92.04%) and gross indicated efficiency (38.58%). However, further reduction in NHD below this range causes premature ignition, energy dissipation, and higher NOx emissions (10.08 g/kWh) due to elevated combustion temperatures. Conversely, when the NHD increases to 175 µm, the larger droplets formed result in prolonged ignition delays, slower combustion, and lower peak pressures. These effects negatively impact combustion efficiency and promote incomplete combustion, leading to higher HC (15.27 gr/kWh) and CO (4.22 gr/kWh) emissions. Larger NHDs, however, lower NOx emissions to 2.66 gr/kWh due to reduced peak temperatures. This study clearly identifies an optimal NHD range (150–160 µm) that effectively balances droplet size, evaporation rate, combustion timing, and emission reduction, thereby enhancing both engine performance and environmental sustainability.
