Showing 2 results for Three-Wheeled Vehicle
M. A. Saeedi, R. Kazemi,
Volume 3, Issue 1 (3-2013)
Abstract
In this study, stability control of a three-wheeled vehicle with two wheels on the front axle, a three-wheeled
vehicle with two wheels on the rear axle, and a standard four-wheeled vehicle are compared. For vehicle
dynamics control systems, the direct yaw moment control is considered as a suitable way of controlling the
lateral motion of a vehicle during a severe driving maneuver. In accordance to the present available
technology, the performance of vehicle dynamics control actuation systems is based on the individual
control of each wheel braking force known as the differential braking. Also, in order to design the vehicle
dynamics control system the linear optimal control theory is used. Then, to investigate the effectiveness of
the proposed linear optimal control system, computer simulations are carried out by using nonlinear twelvedegree-
of-freedom models for three-wheeled cars and a fourteen-degree-of-freedom model for a fourwheeled
car. Simulation results of lane change and J-turn maneuvers are shown with and without control
system. It is shown that for lateral stability, the three wheeled vehicle with single front wheel is more stable
than the four wheeled vehicle, which is in turn more stable than the three wheeled vehicle with single rear
wheel. Considering turning radius which is a kinematic property shows that the front single three-wheeled
car is more under steer than the other cars.
S. A. Milani, S. Azadi,
Volume 4, Issue 4 (12-2014)
Abstract
Nowadays, the use of small vehicles is spreading among urban areas and one sort of these vehicles are three-wheeled vehicles (TWVs) which can be competitive with four-wheeled urban vehicles (FWVs) in aspects such as smallness, simple manufacturing, and low tire rolling resistance, fuel consumption and so on. The most critical instability associated with TWVs is the roll over. In this paper a tilt control mechanism has been modeled which can reduce the danger of roll over by leaning the vehicle towards the turning center in order to decrease the amount of lateral load transfer (LLT), and by doing so, system combines the dynamical abilities of a passenger car with a motorcycle. A 3 degree of freedom vehicle model is simulated at constant speed in MATLAB-Simulink environment and a fuzzy algorithm is developed to control such a non-linear system with appropriate tilting torque. Results are interpreted in presence and absence of controller with different longitudinal speeds and steering inputs the results are also compared to behavior of a similar FWV and this is concluded that the tilt control system could countervail deficiencies of the TWV compared to the FWV.
