Volume 2, Issue 3 (September 2004)
IJCE 2004, 2(3): 192-200 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
ESFAHANI M, KIANOUSH M, LACHEMI M. A COMPARISON BETWEEN BOND STRENGTH OF STEEL AND GFRP BARS IN SELF-CONSOLIDATING CONCRETE (SCC). IJCE 2004; 2 (3) :192-200
URL: http://ijce.iust.ac.ir/article-1-1069-en.html
URL: http://ijce.iust.ac.ir/article-1-1069-en.html
Abstract: (7503 Views)
This paper compares the results of two experimental studies on bond strength of steel and GFRP bars in the case of self-consolidating concrete (SCC). Each study included pull-out tests of thirty six reinforcing bars embedded in concrete specimens. Two types of concretes, normal concrete and self-consolidating concrete were used in different studies. Different parameters such as bar location and cover thickness were considered as variables in different specimens. The comparison between the results of GFRP reinforcing bars with those of steel deformed bars showed that the splitting bond strength of GFRP reinforcing bars was comparable to that of steel bars in both normal strength and self-consolidating concrete (SCC). The bond strength of bottom reinforcing bars was almost the same for both normal concrete and self-consolidating concrete. However, for the top bars, the bond strength of self-consolidating concrete was less than that of normal concrete.
Type of Study: Research Paper |
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
