Volume 5, Issue 1 (March 2007)
IJCE 2007, 5(1): 1-13 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Javanbarg M, Zarrati A, Jalili M, Safavi K. Development of a 2-D numerical model for simulation of air distribution in high speed air water flow. IJCE 2007; 5 (1) :1-13
URL: http://ijce.iust.ac.ir/article-1-310-en.html
URL: http://ijce.iust.ac.ir/article-1-310-en.html
Development of a 2-D numerical model for simulation of air distribution in high speed air water flow
Abstract: (10767 Views)
In the present study a quasi 2-D numerical model is developed for calculating air concentration distribution in rapid flows. The model solves air continuity equation (convection diffusion equation) in the whole flow domain. This solution is then coupled with calculations of the free surface in which air content in the flow is also considered. To verify the model, its results are compared with an analytical solution as well as a 2-D, numerical model and close agreement was achieved. The model results were also compared with experimental data. This comparison showed that the decrease in air concentration near the channel bed in an aerated flow could be well predicted by the model. The present simple numerical model could therefore be used for engineering purposes.
Type of Study: Research Paper |
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
