Volume 2, Issue 4 (December 2004)
IJCE 2004, 2(4): 246-256 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Alinia M. A PARAMETRIC INVESTIGATION ON STIFFENING AXIALLY LOADED PANELS. IJCE 2004; 2 (4) :246-256
URL: http://ijce.iust.ac.ir/article-1-587-en.html
URL: http://ijce.iust.ac.ir/article-1-587-en.html
Abstract: (22634 Views)
One main factor in design of panels subjected to axial loading is their buckling behaviour. The design of stiffeners in a metal or composite plated structure is the key factor for safety and weight reduction. This work presents a parametric study on the optimal types and geometrical properties of stiffeners in plates under in-plane axial loads. The results show that flanged type (such as T or L) longitudinal stiffeners increase the normal critical stresses by at least 28% compared to non-flanged stiffener. It is also shown that the optimum geometric properties of stiffeners correspond to the point when the buckling shape of a plate changes from the overall to local mode. Also it is illustrated that for these optimal instances, there always is a linear relationship between the cross-sectional area ratio and the rigidity ratio of the stiffeners to the plates. Finally, Sample relationships for plates having different number of stiffeners are presented.
Type of Study: Research Paper |
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
