Volume 12, Issue 4 And A (Transaction A: Civil Engineering December 2014)
IJCE 2014, 12(4 And A): 488-503 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Yılmaz M C, Anıl Ö, Alyavuz B, Kantar E. Load displacement behavior of concrete beam under monotonic static and low velocity impact load. IJCE 2014; 12 (4) :488-503
URL: http://ijce.iust.ac.ir/article-1-917-en.html
URL: http://ijce.iust.ac.ir/article-1-917-en.html
Abstract: (7829 Views)
Experiments were carried out to observe the influence of loading type on concrete beam specimens. Beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. Load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discussed. A finite element (FE) model was prepared in ANSYS Explicit STR software and the results of FE analysis were compared with experimental results. The loading type and loading rate have significant influence on the maximum load, stiffness and energy dissipation capacity. Numerical results obtained from ANSYS Explicit STR FE models are consistent with the experimental results.
Keywords: Load- displacement behavior, Concrete beam, Low velocity impact behavior, Drop weight, ANSYS
Type of Study: Research Paper |
Subject:
Structure- Concrete
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
