Search published articles


Showing 3 results for Arabzadeh

A. Arabzadeh, A.r. Rahaie, A. Aghayari,
Volume 7, Issue 3 (Sept. 2009)
Abstract

In this paper a new method based on Strut-and-Tie Model (STM) is proposed to determine the shear capacity of simply supported RC deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. It is assumed that, the total carried shear force by RC deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism and the equivalent resisting force resulted by web reinforcements, web reinforcing reduces the concrete compression softening effect with preventing from the diagonal cracks opening or concrete splitting. The unknown function and parameters are determined from 324 experimental results obtained by other researchers. To validate the proposed method, the obtained results are compared with some of the existing methods and codes such as ACI 318-05 and CSA. The results indicate that the proposed method is capable to predict the shear strength of variety of deep beams with acceptable accuracy.
Abolfazl Arabzadeh, Reza Aghayari, Ali Reza Rahai,
Volume 9, Issue 3 (September 2011)
Abstract

An experimental-analytical investigation was conducted to study the behavior of high-strength RC deep beams a total of sixteen

reinforced concrete deep beams with compressive strength in range of 59 MPaOf'c O65 MPa were tested under two-point top

loading. The shear span-to-effective depth ratio a/d was 1.10 all the specimens were simply supported and reinforced by

vertical, horizontal and orthogonal steel bars in various arrangements. The test specimens were composed of five series based

on their arrangement of shear reinforcing. The general behavior of tested beams was investigated. Observations were made on

mid-span and loading point deflections, cracks form, failure modes and shear strengths. The test results indicated that both

vertical and horizontal web reinforcement are efficient in shear capacity of deep beams, also the orthogonal shear reinforcement

was the most efficient when placed perpendicular to major axis of diagonal crack. Concentrating of shear reinforcement within

middle region of shear span can improve the ultimate shear strength of deep beam. The test results were then compared with the

predicted ultimate strengths using the ACI 318-08 provisions ACI code tended to either unsafe or scattered results. The

performed investigations deduced that the ACI code provisions need to be revised.


A. Arabzadeh, R. Aghayari, Ali A. R. Rahai,
Volume 10, Issue 4 (December 2012)
Abstract

Strut-and-Tie Model (STM) can be used to model the flow of compression within a concrete strut. Concrete struts are formed

in various shapes such as prismatic or bottle-shaped. In order to study the behavior of concrete struts, a series of simple tests

were performed. Eighteen reinforced concrete isolated struts with compressive strength of 65 MPa were tested up failure under

point loading in the plane of specimens. The tested specimens were reinforced by various reinforcement layouts. The behavior

of tested beams was investigated. Observations were made on transverse displacement, primary cracking and ultimate failure

load and distribution of strain on the face of tested panels. Based on these observations, the geometry of the concrete struts was

examined. a new model to analysis of concrete struts was proposed based on modified compression field theory (MCFT). A

database of 44 tested specimens was compiled to evaluate the proposed model. The results indicate that using the ACI and CSA

codes expressions regarding the amount of minimum required reinforcement in a strut produces conservative but erratic results

when compared with the test data. Conversely, the new proposed model presents a more accurate prediction for the strength of

44 tested struts.



Page 1 from 1     

© 2024 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb