---

In this paper, a location allocation (LA) problem in construction and demolition (C&D) waste management (WM) is studied. A bi-level model for this problem under a fuzzy random environment is presented where the upper level is the governments who sets up the processing centers, and the lower level are the administrators of different construction projects who control C&D waste and the after treatment materials supply. This model using an improved particle swarm optimization program based on a fuzzy random simulation (IPSO-based FRS) is able to handle practical issues. A case study is presented to illustrate the effectiveness of the proposed approach. Conclusions and future research directions are discussed.

---

To improve the construction efficiency of the Longtan Hydropower Project, this paper studies the multi-mode resourceconstrained project scheduling problem in its Drilling Grouting Construction Project. A multiple objective decision making model with bi-random coefficients is first proposed for this practical problem to cope with hybrid uncertain environment where twofold randomness exists. Subsequently, to deal with the uncertainties, the chance constraint operator is introduced and the equivalent crisp model is derived. Furthermore, the particular nature of our model motivates us to develop particle swarm ptimization algorithm for the equivalent crisp model. Finally, the results generated by computer highlight the performances of the proposed model and algorithm in solving large-scale practical problems.

---

In this paper, a bi-level decision making model is proposed for a vehicle routing problem with multiple decision-makers (VRPMD) in a fuzzy random environment. In our model, the objective of the leader is to minimize total costs by deciding the customer sets, while the follower is trying to minimize routing costs by choosing routes for each vehicle. Demand for each item has considerable uncertainty, so customer demand is considered a fuzzy random factor in this paper. After setting up the bi-level programming model for VRPMD, a bi-level global-local-neighbor particle swarm optimization with fuzzy random simulation (bglnPSO-frs) is developed to solve the bi-level fuzzy random model. Finally, the proposed model and method are applied to construction material transportation in the Yalong River Hydropower Base in China to illustrate its effectiveness.

---

In soft soil areas, equal-length piles are often adopted in the retaining system. A decrease in the bending moment value borne by the retaining structure along the pile depth (below the excavation bottom), leads to an inadequate use of the pile bending capacity near the pile bottom. This paper presents retaining systems with long and short pile combinations, in which the long piles ensure integral stability of the excavation while the short piles give full play to bearing the bending moment. For further analysis on pile and bottom heaves deformations and inner-force characteristics, three-dimensional models were built in order to simulate the stage construction of the excavation. The ratio between long and short pile numbers, and the effects on short pile length pile horizontal deformation, pile bending moment and bottom heave are investigated in detail. In the end, a feasible long-short pile combination is established. Obtained results from the simulation data and the field data prove that the long-short pile retaining system is feasible.

---

To study seismic performance of concrete-encased composite columns with T-shaped steel cross-section, twelve half-scale columns were tested under quasi-stastic cyclic loading. The result indicates that concrete-encased composite columns with T-shaped steel section possess good seismic performance. The failure modes include bending failure, shear-bond failure, shear compression failure and shear-composition failure. Unsymmetrical phenomenon of positive and negative hysteresis loop was shown evidently. Span ratio has a great influence on failure mode. The ductility performance decreases with increasing of axial compression level. As stirrup ratio increases, ductility and bearing capacity of columns are improved greatly, and energy dissipation capacity after yielding is enhanced. Cross tie can enhance ultimate bearing capacity, and lower strength attenuation and stiffness degradation on the later loading stage

---

Due to the nonlinear relationship between storage and discharge existing in the nonlinear forms of the Muskingum model, the model parameters and outflow cannot be directly determined. The traditional routing procedure has been widely applied to model calibration and flood routing. However, most studies have focused only on the accuracy of parameter estimation methods which adopt the traditional routing procedure, ignored the correctness and effectiveness of routing procedure itself. In this study, three routing schemes of traditional routing procedure are evaluated by simulation experiment and the results demonstrate that the routing scheme 1 is the best, and scheme 3 is followed, the worst one is scheme 2. But the scheme 1 and 3 yield parameters estimates and corresponding outflow hydrographs lead to violation of the routing equations in terms of residuals. The scheme 2 is legitimate, however, the accuracy is not high enough. As an alternative, a new routing procedure based on iterative method is proposed for parameter estimation and flood routing of the nonlinear Muskingum models. The proposed routing procedure is applied to model calibration and flood routing for three examples involving single-peak, multi-peak, and non-smooth hydrographs. The results show that the proposed routing procedure is not only satisfying the routing equations for all time stages in the routing process, but also superior to the routing scheme 2. Therefore, it can confidently be applied to parameter estimation and flood routing for the nonlinear Muskingum models.

---

The cavitation erosion induced by high flow velocities is very prominent in high head and large unit discharge tunnel. Air entrainment is an effective technology to solve this problem. In this study, numerical simulation and physical model test are applied to the comparative study of air-water flows on bottom and lateral aerator in tunnel. The flow pattern, aeration cavity, air concentration and pressure distribution were obtained and there is a close agreement between the numerical and physical model values. The hydraulic characteristic and aeration effect of anti-arc section are analyzed. The results indicated that added lateral aeration facilities on 1# and 2# aerator can weaken backwater and increase the length of the bottom cavity, but it is limited to improve the air concentration and protect sidewall downstream of the ogee section. Air concentration improved on side walls downstream of anti-arc section when added lateral aeration facility on 3# aerator. The black water triangle zone disappeared and the floor and side walls well protected.

---

Ship lift is a major navigation structure lifting and lowering ships to shorten the time across the dam. The ship chamber, the key equipment, serves as the carrier for ships. Due to its gigantic body and mass, complicated coupled vibrations occur between the chamber and ship lift structure during seismic process. With the engineering background of the ship lift at the Three Gorges dam, a three-dimensional shell finite element model is established for the ship lift, and then simplified into a three-dimensional truss finite element model through dynamic equivalent principle. And the numerical model of coupled vibration analysis is formed through static condensation, calculating the coupled vibration response between the ship lift structure and the ship chamber. The result shows that no connection and rigid connection between them are both inadvisable. Consequently, three connection devices: spring, viscous liquid damper and magneto-rheological fluid damper are applied to control coupled vibrations during artificial seismic waves. The result shows that the magneto-rheological fluid damper makes better vibration damping effect if suitable semi-active control strategy is applied, in comparison with passive control devices.

---

To fully explain hydropower unit operational problems, an optimal multi-objective dynamic scheduling model is presented which seeks to improve the efficiency of reservation regulation management. To reflect the actual hydropower engineering project environment, fuzzy random uncertainty and an integrated consideration of the natural resource constraints, such as load balance, system power balance, generation limits, turbine capacity, water head, discharge capacities, reservoir storage volumes, and water spillages, were included in the model. The aim of this research was to concurrently minimize discharges and maximize economic benefit. Subsequently, a new hybrid dynamic-programming based multi-start multi-objective simulated annealing algorithm was developed to solve the hydro unit operational problem. The proposed model and intelligent algorithm were then applied to the Xiaolongmen Hydraulic and Hydropower Station in China. The computational unit commitment schedule results demonstrated the practicality and efficiency of this optimization method.

---

The construction temporary facilities layout planning (CTFLP) requires an identification of necessary construction temporary facilities (CTFs), an identification of candidate locations and a layout of CTFs at candidate locations. The CTFLP is particularly difficult and complex in large-scale construction projects as it affects the overall operation safety and effectiveness. This study proposes a decision making system to decide on an appropriate CTFLP in large-scale construction projects (e.g. dams and power plants) in a comprehensive way. The system is composed of the input, CTF identification, candidate location identification, layout optimization, evaluation and selection, as well as output stages. The fuzzy logic is employed to address the uncertain factors in real-world situations. In the input stage, the knowledge bases for identifying CTFs and candidate locations are determined. Then, CTFs and candidate locations are identified in the following two stages. In the mathematical optimization stage, a multiobjective mathematical optimization model with fuzzy parameters is established and fuzzy simulation-based Genetic Algorithm is proposed to obtain alternative CTFLPs. The intuitionistic fuzzy TOPSIS method is used to evaluate and select the most satisfactory CTFLP, which is output in the last stage. To demonstrate the effectiveness and efficacy of the proposed method, the CTFLP for the construction of a large-scale hydropower dam project is used as a practical application. The results show that the proposed system can assist the contractor to obtain an appropriate CTFLP in a more efficient and effective manner.

---

This paper presents a comparative numerical research on the overall seismic behavior of RC frames with different types of rebars (normal versus high strength rebar). A nonlinear numerical model is developed and is validated using experimental results. Comparing the numerical and experimental behaviors shows that the developed model is capable of describing the hysteretic behavior and plastic hinges development of the experimental RC frames with various strength longitudinal steel bars. The validated model is then used, considering the influences of axial load ratios and volumetric ratios of longitudinal rebars of column, to investigate the effects of reinforcement strength on the overall seismic behavior of RC frames. The simulation results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frames reinforced with normal and high strength steel bars have comparable overall deformation capacity. The effect of axial load ratio on the energy dissipation, hysteretic curves and ultimate lateral load of frames with different strength rebars is similar. In addition, increasing the volumetric ratios of longitudinal rebars can increase the ultimate lateral load of frame and improve the plastic hinge distribution of frame.