Search published articles


Showing 2 results for Particle Crushing

Saleh Zadeh H., Ghazanfari E.,
Volume 2, Issue 4 (12-2004)
Abstract

To study the behavior of carbonate sands parametrically, some monotonic triaxial testswere carried out on Kish carbonate sand. The sample was provided from Kish Island beach. Inorder to examine the effect of density and confining pressure, samples in loose and dense stateswere tested under different confining pressures. For studying the effect of drainage andconsolidation, different stress paths were followed. Also to study the effect of particle crushing indrained tests all samples were graded before and after testing. Comparison between loose anddense samples in both drained and undrained tests showed that with increasing confiningpressure, the reduction in shear resistance in loose samples is less than dense samples and theincrement rate of particle crushing in loose samples is more than dense samples. In the range oflow confining pressures both loose and dense samples showed dilation response. With increasingconfining pressure, the loose samples tended to exhibit contraction and the rate of dilation indense samples reduced. Because recovering undisturbed sample of carbonate sediments is veryhard or even impossible so the effect of soil disturbance is not studied in this research.
A. Hamidi, M. Alizadeh, S.m. Soleimani,
Volume 7, Issue 1 (3-2009)
Abstract

There are limitations in experimental studies on sand-gravel mixtures due to the small size of testing

specimens. Due to this problem, many researchers have worked on prediction of the shear strength of mixture by testing

the sandy fraction of soil alone and developed empirical relationships. Most of the previous relationships have been

determined for low surcharge pressures in which particle breakage does not affect the shear strength parameters.

However, the particle breakage affects the relationships in higher confinements. At the present study, the results of

large scale direct shear tests on sand and sand-gravel mixtures was used to investigate the shear behavior and

dilatancy characteristics in a wider range of surcharge pressures. The gravel content, relative density, surcharge

pressure and gravel grain size were considered as variables in testing program. The relationships between shear

strength characteristics of sand and sand-gravel mixtures were determined considering dilation characteristics of the

soil. In this regard, the minimum void ratio was found as a useful indirect index that relates uniquely to the critical

state friction angle independent of soil gradation. The relations between critical state or peak friction angles of the

mixture with minimum void ratio were determined as a function of surcharge pressure. The correlations could be useful

for determination of the strength parameters of sand-gravel composites by testing sandy fraction of mixture.



Page 1 from 1     

© 2024 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb