Search published articles


Showing 2 results for Friction Angle

A. Hamidi, M. Alizadeh, S.m. Soleimani,
Volume 7, Issue 1 (3-2009)
Abstract

There are limitations in experimental studies on sand-gravel mixtures due to the small size of testing

specimens. Due to this problem, many researchers have worked on prediction of the shear strength of mixture by testing

the sandy fraction of soil alone and developed empirical relationships. Most of the previous relationships have been

determined for low surcharge pressures in which particle breakage does not affect the shear strength parameters.

However, the particle breakage affects the relationships in higher confinements. At the present study, the results of

large scale direct shear tests on sand and sand-gravel mixtures was used to investigate the shear behavior and

dilatancy characteristics in a wider range of surcharge pressures. The gravel content, relative density, surcharge

pressure and gravel grain size were considered as variables in testing program. The relationships between shear

strength characteristics of sand and sand-gravel mixtures were determined considering dilation characteristics of the

soil. In this regard, the minimum void ratio was found as a useful indirect index that relates uniquely to the critical

state friction angle independent of soil gradation. The relations between critical state or peak friction angles of the

mixture with minimum void ratio were determined as a function of surcharge pressure. The correlations could be useful

for determination of the strength parameters of sand-gravel composites by testing sandy fraction of mixture.


A. Soroush, R. Jannatiaghdam,
Volume 10, Issue 2 (6-2012)
Abstract

This paper studies thoroughly and deeply the results of about one hundred triaxial compression tests on thirty types of rockfill
materials. The materials are categorized in accordance with their particles shape (angular / rounded) and gradation
characteristics. The main tool of the study is the Hyperbolic Model developed by Duncan and Chang. The focus of the study is
on the variations of deformation modulus of the materials (Ei and Et) with confining stress (&sigma3). Features of the mechanical
behavior of the rockfill materials, as compared with the general behavior of soils, are highlighted through the exponent
parameter (n) of the Hyperbolic Model. It is shown that high confining stresses may have adverse effects on the deformation
modulus of the rockfill materials and make them softer. The particle breakage phenomenon which happens during compression
and shearing is found as the main factor responsible for the above effects and, in general, responsible for controlling the
behavior of the materials. For the rockfill materials of this study, two correlations for estimating the initial elasticity modulus (Ei)
and the internal friction angle (&phi) in terms of particles shape, confining pressure (&sigma3), and coefficient of uniformity (Cu) are
suggested.



Page 1 from 1     

© 2024 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb