Soft soil in Hanoi, Vietnam, is mainly originated from lacustrine and shallow-sea sediment. This is the youngest formation with
around 3000 years of age. To serve the research purpose, clayey soil samples at ten areas in Hanoi and some places in the RRD
are prepared. Mineral composition of soils determined by X-ray diffraction analysis shows that clay minerals are predominated
by Illite, Kaolinite, Chlorite, and Montmorillonite respectively. Many previous researches indicated that in saline-saturated
condition, types of cation in saline water and types of clay mineral in soil layers, as well as their predomination decide the
changing process of geotechnical properties in other manner. In this paper, the initial relationship between geotechnical
properties and clay mineral composition of Hanoi soft soils in saline-saturated media is established

The present study focuses on measuring the effects of industrial wastewater disposed from thermal electricity power plant as by-product on the geotechnical properties of sandy soil and applying washing process to remediate the contaminated soil samples and measure the efficiency of washing technique. The disturbed sandy soil samples were obtained from Al-Kufa City located to the southwest of Iraq and the industrial wastewater obtained from Al-Musayib thermal electricity power plant. The intact sandy soil was contaminated in the laboratory with four percentages of industrial wastewater (10, 20, 40 and 100%) calculated according to the weight of dry soil. The industrial wastewater is mixed with distilled water to constitute the solution used in the contamination process of soil through soaking the soil by this solution for 30 days. The study results showed that with increasing the percentages of the contaminant, there was a slight increase in both the liquid limit and particle size, while there was a significant increase in the optimum water content. Nevertheless, a slight decrease was observed in the specific gravity, maximum dry unit weight, and void ratio, while, a considerable decrease was noticed in the angle of the internal friction and coefficient of permeability of soil. The proposed remediation technique “soil washing” is efficient, economical, and time saving when used to remediate sandy soils. After remediation, the results showed an increase in the cohesion, angle of internal friction and maximum dry unit weight. Also, a slight increase was observed in the specific gravity, void ratio and permeability coefficient of remediated soil samples when compared with that of contaminated samples. The removal efficiencies of contaminant from soil were (97.63, 96.79, 96.58, and 93.87%) for the soil samples contaminated with industrial wastewater by (10, 20, 40 and 100%), respectively.

Soils with poor engineering properties have been a concern to construction engineers because of the need to strike a balance between safety and economy during earthworks construction. This research work investigates the effects of treating a soil having poor geotechnical properties with a bio-enzyme to determine its suitability for use as road pavement layer material. The elemental composition and microstructure of the soil was determined using energy dispersive X-ray spectroscopy and scanning electron microscopy, respectively. The specific gravity, Atterberg limits, compaction, strength and permeability characteristics of the soil was determined for various dosages of the bio-enzyme. The mountain soil is classified as clayey sand and A-2–4, according to unified soil classification and AASHTO classification systems, respectively. With increasing dosage of the bio-enzyme, the plasticity index, maximum dry unit weight and permeability of the soil decreased, while its 28-day California bearing ratio value, unconfined compressive strength and shear strength increased. Consequently, the application of bio-enzyme to the soil improved its plasticity and strength, and reduced its permeability. It, therefore, became more workable and its subgrade quality was improved for use as a road pavement layer material. The stabilized soil can be suitably used for constructing pavement layers of light-trafficked rural (earth) roads, pedestrian walkways and bicycle tracks.