جلد 19، شماره 5 - ( 4-1387 )                   جلد 19 شماره 5 صفحات 96-89 | برگشت به فهرست نسخه ها

XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bazdidi Tehrani F, Feizollahi H. Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow . IJIEPR 2008; 19 (5) :89-96
URL: http://ijiepr.iust.ac.ir/article-1-130-fa.html
Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow . نشریه بین المللی مهندسی صنایع و تحقیقات تولید. 1387; 19 (5) :89-96

URL: http://ijiepr.iust.ac.ir/article-1-130-fa.html


چکیده:   (47852 مشاهده)

The mixing characteristics of coolant air jets with the hot gas exiting the gas turbine combustor’s primary zone is of major importance to the combustor exit temperature profile. In the present work, a three dimensional numerical simulation on the basis of the finite volume method was developed. The aim was to investigate the penetration and mixing characteristics of directly opposed rows of coolant jets injected normally into a heated confined cross stream. The ability of the standard and the realizable κ-ε turbulence models in the prediction of formation of dimensionless temperature profiles, downstream of jets, was evaluated. The effect of jet-to-mainstream momentum flux ratio, in the lower and upper limits of 25.0 and 60.0, at a fixed channel height-to-hole diameter ratio of 12.5 and a periodic distance of adjacent jets of 2 cm, was investigated. Also the effect of periodic distance in the range of 1-3 cm on the temperature profile was studied. Comparisons between the present numerical results on the temperature profiles and the experimental data of Wittig et al. [13] demonstrated reasonable agreement.

 

Keywords:  
     
نوع مطالعه: پژوهشي | موضوع مقاله: و موضوعات مربوط
دریافت: 1389/4/28 | انتشار: 1387/4/25

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به نشریه بین المللی مهندسی صنایع و تحقیقات تولید می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | International Journal of Industrial Engineering & Production Research

Designed & Developed by : Yektaweb