Volume 17, Issue 1 (March 2020)                   IJMSE 2020, 17(1): 69-76 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mahdi M, Abdul-Hameed A, Ali B, Al-Taay H. Fabrication of SiNWs/PEDOT:PSS Heterojunction Solar Cells. IJMSE 2020; 17 (1) :69-76
URL: http://ijmse.iust.ac.ir/article-1-1514-en.html
Abstract:   (13403 Views)
Silicon nanowires (SiNWs) are synthesized through a metal-assisted chemical etching (MACE) method using Si(100) substrates and silver (Ag) as a catalyst. Scanning electron microscope (SEM) images confirmed that length of prepared SiNWs was increased when etching time increased. The prepared SiNWs demonstrated considerably low light reflectance at a wavelength range of 200–1100 nm. The photoluminescence (PL) spectra of the grown SiNWs showed a broad emission band peaked at a wavelength of about 750 nm. A solar cell and photodetector based on heterojunction SiNWs/PEDOT:PSS were fabricated using SiNWs that prepared with different etching time and its J–V, sensitivity, and time response were investigated. The conversion efficiency of fabricated solar cell was increased from 0.39% to 0.68% when wire length decreased from 24 µm to 21 µm, respectively. However, the sensitivity of the heterojunction SiNWs/PEDOT:PSS photodetector was decreased from 53774% to 36826% when wire length decreased from 24 µm to 21 µm, respectively.
Full-Text [PDF 855 kb]   (3874 Downloads)    
Type of Study: Research Paper |

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb