Iranian Journal of Materials Science and Engineering
Iran University of Science & Technology
Fri, Nov 22, 2024
[Archive]
Volume 6, Issue 1 (winter 2009 2009)
IJMSE 2009, 6(1): 38-44 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
I. Ebrahimzadeh, Gh.H. Akbari. Effect of Microstructure and mechanical properties of horizontal continuous cast pipe of CuZn40Al1 alloy. IJMSE 2009; 6 (1) :38-44
URL: http://ijmse.iust.ac.ir/article-1-158-en.html
URL: http://ijmse.iust.ac.ir/article-1-158-en.html
Abstract: (35724 Views)
Abstract: Horizontal continuous casting is widely used to produce semi-finished and finished metallic products.
Homogeneity in metallurgical characteristics and mechanical properties in such products is of importance. In the
present work microstructure and mechanical properties of a horizontal continuous cast pipe have been studied.
Microstructural features were investigated by an optical microscope equipped with image analyzer and SEM was used
to characterize precipitates. Tensile behavior, impact strength and hardness variations were the mechanical properties
which were studied. Results showed that microstructure and mechanical properties had diversities in different parts of
the pipe and distinct differences were observed between upper and lower parts of the pipe. A meaningful correlation
was found in microstructure and mechanical properties in different parts of the component.
Keywords: Continuous caster, two phase brasses, CiZn40Al1 alloy, Microstructure, Mechanical properties.
Type of Study: Technical Note |
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
