Volume 6, Issue 2 (Spring 2009 2009)                   IJMSE 2009, 6(2): 1-10 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. Allahverdi, E. Najafi Kani. APPLICATION OF FTIR-SPECTROSCOPY TECHNIQUE IN CHARACTERIZING MOLECULAR STRUCTURE OF NATURAL POZZOLAN-BASED GEOPOLYMER CEMENT. IJMSE 2009; 6 (2) :1-10
URL: http://ijmse.iust.ac.ir/article-1-185-en.html
Abstract:   (29270 Views)

geopolymer cement (inorganic polymeric binder) based on natural pozzolan are investigated. SiO

of activator and total molar ratios of Nacomposition exhibiting the highest 28-day compressive strength. Mixtures exhibiting the highest compressive strength were studied for their molecular structure using laboratory technique of Fourier transform infrared spectroscopy.Results obtained confirm that changes in chemical composition and curing condition can result in variations in degree of silicon substitution by aluminum in the second coordination sphere. Hydrothermal curing affects the molecular structure so that by increasing the hydrothermal curing temperatures, a lower degree of silicon substitution by aluminum in the second coordination sphere is observed. The molecular structure of the studied inorganic polymeric binde is composed of Si-O-Si chains bonded to Al-O and Si-O units creating two and three dimensional networks.

In this paper, the effects of chemical composition and curing conditions on molecular structure of2/Na2O molar ratio2O/Al2O3, and H2O/Al2O3 were changed to determine the optimum chemical
     
Type of Study: Research Paper | Subject: Ceramics

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb