Volume 11, Issue 1 (march 2014)                   IJMSE 2014, 11(1): 62-66 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
M. Ghavidel, S. M. Rabiee, M. Rajabi. THE EFFECT OF NANO BIOGLASS ON THE FABRICATION OF POROUS TITANIUM SCAFFOLDS. IJMSE 2014; 11 (1) :62-66
URL: http://ijmse.iust.ac.ir/article-1-631-en.html
THE EFFECT OF NANO BIOGLASS ON THE FABRICATION OF POROUS TITANIUM SCAFFOLDS
M. Ghavidel , S. M. Rabiee , M. Rajabi
Abstract:   (21809 Views)
In this study, porous titanium composites containing 5, 10 and 15 wt. % nanobioglass were fabricated by space holder sintering process. The pore morphology and phase constituents of the porous samples were characterized by X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The mechanical properties were determined by compression test. The porosity of the sintered samples showed an upward trend with an increase in bioglass content. As the bioglass content was increased, the compressive strength was first increased and then decreased. The results obtained in this work suggest that the fabricated porous compact with 10 wt. % bioglass with compressive strength value of about 76.7 MPa, high porosity and good biocompatibility has the potential application for bone tissue engineering.
Keywords: Titanium, Bioglass, Mechanical properties, Porosity.
Full-Text [PDF 3251 kb]   (4718 Downloads)    
Type of Study: Research Paper |
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb