A. Tahershamsia, A. Kaveh, R. Sheikholeslamia , S. Talatahari,
Volume 2, Issue 1 (3-2012)
Abstract
The Big Bang-Big Crunch (BB–BC) method is a relatively new meta-heuristic algorithm which inspired by one of the theories of the evolution of universe. In the BB–BC optimization algorithm, firstly random points are produced in the Big Bang phase then these points are shrunk to a single representative point via a center of mass or minimal cost approach in the Big Crunch phase. In this paper, the BB–BC algorithm is presented for optimal cost design of water distribution systems and employed to optimize different types of hydraulic networks with discrete variables. The results demonstrate the efficiency of the proposed method compared to other algorithms.
S. Kazemzadeh Azad , S. Kazemzadeh Azad, A. Jayant Kulkarni,
Volume 2, Issue 1 (3-2012)
Abstract
The present study is an attempt to propose a mutation-based real-coded genetic algorithm (MBRCGA) for sizing and layout optimization of planar and spatial truss structures. The Gaussian mutation operator is used to create the reproduction operators. An adaptive tournament selection mechanism in combination with adaptive Gaussian mutation operators are proposed to achieve an effective search in the design space. The standard deviation of design variables is used as a key factor in the adaptation of mutation operators. The reliability of the proposed algorithm is investigated in typical sizing and layout optimization problems with both discrete and continuous design variables. The numerical results clearly indicated the competitiveness of MBRCGA in comparison with previously presented methods in the literature.
M.a. Youssef , I.a. Mohammed, A.n. Ibraheem, I.m. Hussein,
Volume 2, Issue 1 (3-2012)
Abstract
General Authority for Educational Buildings (GAEB) in Egypt is responsible for new construction and maintenance of the educational building [1]. According to the Sixth Five- Years Plan in Egypt, the program of educational structures includes new construction of about 2915 schools, with 39.8 thousand classes. Also, maintenance works for buildings about 1250 schools. These works needs a high budget but the available budget is less than the required budget. Therefore, GAEB should apply optimization techniqes to save cost and optimize the benefit from the avaliable budget with the same quality level or more. This paper aims to apply value engineering technique on educational building to maximuize the utiltization of the available constructuion and maintenace budget. In this paper value engineering technique, is applied on a model of primary school. The paper suggested that GAEB should construct a value engineering department included in its organization structure. Finally it draws overall conclusions about the application of value engineering (VE) in the GAEB in Egypt. Also, to get the optimum set of activities, alternatives for cost saving and maximize the utilization of the available funds for new construction and maintenance works. The value engineering technique application is based on data collected from GAEB.
A. Afshar, S. Madadgar , M.r. Jalali, F. Sharifi ,
Volume 2, Issue 1 (3-2012)
Abstract
Ant colony optimization algorithms (ACOs) have been basically introduced to discrete variable problems and applied to different research domains in several engineering fields. Meanwhile, abundant studies have been already involved to adapt different ant models to continuous search spaces. Assessments indicate competitive performance of ACOs on discrete or continuous domains. Therefore, as potent optimization algorithms, it is encouraging to involve ant models to mixed-variable domains which simultaneously tackle discrete and continuous variables. This paper introduces four ant-based methods to solve mixed-variable problems. Each method is based upon superlative ant algorithms in discrete and/or continuous domains. Proposed methods’ performances are then tested on a set of three mathematical functions and also a water main design problem in engineering field, which are elaborately subject to linear and non-linear constraints. All proposed methods perform rather satisfactorily on considered problems and it is suggested to further extend the application of methods to other engineering studies.
A. Csébfalvi,
Volume 2, Issue 1 (3-2012)
Abstract
This paper provides a test method to make a fair comparison between different heuristics in structure optimization. When statistical methods are applied to the structural optimization (namely heuristics or meta-heuristics with several tunable parameters and starting seeds), the "one problem - one result" is extremely far from the fair comparison. From statistical point of view, the minimal requirement is a so-called "small-sample" according to the fundamental elements of the theory of the experimental design and evaluation and the protocol used in the drug development processes. The viability and efficiency of the proposed statistically correct methodology is demonstrated using the well-known ten-bar truss on a set of the heuristics from the brutal-force-search up to the most sophisticated hybrid approaches.
P. Valli, C. Antony Jeyasehar,
Volume 2, Issue 2 (6-2012)
Abstract
Equipment selection is a key factor in modern construction industry. As it is a complex factor, current models offered by literatures fail to provide adequate solutions for major issues like systematic evaluation of soft factors and weighting of soft benefits in comparison with costs. This paper aims at making a comparative study between GA and AHP by utilising MATLAB as a tool. It is a convenient tool offering an orderly methodical thinking. It guides them in making consistent decisions and provides a facility for all necessary computation.
A. Farshidianfar, S. Soheili,
Volume 2, Issue 2 (6-2012)
Abstract
This paper investigates the optimized parameters for the tuned liquid column dampers to decrease the earthquake vibrations of high-rise buildings. Considering soil effects, the soilstructure interaction (SSI) is involved in this model. The Tuned Liquid Column Damper (TLCD) is also utilized on the roof of the building. Since the TLCD is a nonlinear device, the time domain analysis based on nonlinear Newmark method is employed to obtain the displacement, velocity and acceleration of different stories and TLCD. To illustrate the results, Kobe earthquake data is applied to the model. In order to obtain the best settings for TLCD, different parameters of TLCD are examined with constant mass quantity. The effective length, head loss coefficient, cross sectional ratio and length ratio of TLCD are assumed as the design variables. The objective is to reduce the maximum absolute and Root Mean Square (RMS) values of displacement and acceleration during earthquake vibration. The results show that the TLCDs are very effective and beneficial devices for decreasing the oscillations of high-rise buildings. It is indicated that the soil type highly affects the suitable parameters of TLCD subjected to the earthquake oscillations. This study helps the researchers to the better understanding of earthquake vibration of the structures including soil effects, and leads the designers to achieve the optimized TLCD for the high-rise buildings.
A. Kaveh , V.r. Mahdavi,
Volume 2, Issue 2 (6-2012)
Abstract
Endurance Time Acceleration Functions are specially predesigned intensifying excitation functions that their amplitude increases with time. On the other hand, wavelet transform is a mathematical tool that indicates time variations of frequency in a signal. In this paper, an approach is presented for generating endurance time acceleration functions (ETAFs) whose response spectrum is compatible with the European Code regulations (EC8) elastic spectrum. Method applied is a modification of data in time and frequency domain. For this purpose, wavelet transform has been used to decompose a series of random points to several levels such that each level covers a special range of frequency, then every level is divided into the numbers of equal time intervals and each interval of time is multiplied by a variable. Subsequently, the mathematical unconstrained optimization algorithm is used to calculate the variables and minimize error between response and target spectra. The prosed procedure is used in two methods. Then with two methods, two different acceleration functions are produced.
S.h. Mirmohammadi, Sh. Shadrokh, K. Eshghi,
Volume 2, Issue 2 (6-2012)
Abstract
The purpose of this paper is to present a polynomial time algorithm which determines the lot sizes for purchase component in Material Requirement Planning (MRP) environments with deterministic time-phased demand with zero lead time. In this model, backlog is not permitted, the unit purchasing price is based on the all-units discount system and resale of the excess units is possible at the ordering time. The properties of an optimal order policy are argued and on the basis of them, a branch and bound algorithm is presented to construct an optimal sequence of order policies. In the proposed B&B algorithm, some useful fathoming rules have been proven to make the algorithm very efficient. By defining a rooted tree graph, it has been shown that the worst-case time complexity function of the presented algorithm is polynomial. Finally, some test problems which are randomly generated in various environments are solved to show the efficiency of the algorithm.
A. Csébfalvi,
Volume 2, Issue 2 (6-2012)
Abstract
The cumulative resource constraints of the resource-constrained project scheduling problem (RCPSP) do not treat the resource demands as geometric rectangles, that is, activities are not necessarily assigned to the same resource units over their processing times. In spite of this fact, most papers on resource-constrained project scheduling mainly in the motivation phase use a strip packing of rectangles (SPR) like visualization to illustrate the resource allocation. A novice researcher inspired by the "artistic" SPR visualization may think that the "rectangles" are essential elements of the RCPSP, and that the RCPSP is a special counter-intuitive strip packing problem (SPP) which can be solved without explicitly defined strip packing constraints. In this context "artistic" means, that we have to use a "drawing tool" to produce a SPR like visualization, because the standard model of the RCPSP knows nothing about the rectangles. In the RCPSP, the rectangles can be torn vertically and horizontally, which is absurd in the SPP, and the existence of a cumulative solution is only a necessary but not sufficient condition of the existence of the SPR like visualization, as proven by several researchers. Therefore the popular SPR visualization is theoretically wrong and misleading, and hides a real problem, which is connected to the dedicated resource assignment. In this paper, we prove that replacing the rectangles with a set of strips with unit height we can always generate a theoretically correct strip packing of strips (SPS) like dedicated assignment, where dedicated means that each demand unit is served by exactly one resource unit over its duration without "hidden" transfer time and cost.
H. Rahami, A. Kaveh, H. Mehanpour,
Volume 2, Issue 2 (6-2012)
Abstract
In this paper an efficient method is developed for the analysis of non-regular graphs which contain regular submodels. A model is called regular if it can be expressed as the product of two or three subgraphs. Efficient decomposition methods are available in the literature for the analysis of some classes of regular models. In the present method, for a non-regular model, first the nodes of the non-regular part of such model are ordered followed by ordering the nodes of the regular part. With this ordering the graph matrices will be separated into two blocks. The eigensolution of the non-regular part can be performed by an iterative method, and those of the regular part can easily be calculated using decomposition approaches studied in our previous articles. Some numerical examples are included to illustrate the efficiency of the new method.
S. Shojaee, E. Izadpenah, A. Haeri,
Volume 2, Issue 2 (6-2012)
Abstract
NURBS-based isogeometric analysis (IGA) has currently been applied as a new numerical method in a considerable range of engineering problems. Due to non-interpolatory characteristic of NURBS basis functions, the properties of Kronecker Delta are not satisfied in IGA, and as a consequence, the imposition of essential boundary condition needs special treatment. The main contribution of this study is to use the well-known Lagrange multiplier method to impose essential boundary conditions for improving the accuracy of the isogeometric solution. Unlike the direct and transformation methods which are based on separation of control points, this method is capable of modeling incomplete Dirichlet boundaries. The solution accuracy and convergence rates of proposed method are compared with direct and transformation methods through various numerical examples.
D.a. de Souza Junior, F.a.r. Gesualdo , Lívia M. P. Ribeiro,
Volume 2, Issue 2 (6-2012)
Abstract
This paper presents the study of the optimized bi-dimensional wood structures, truss type, applying the method of genetic algorithms. Assessment is performed by means of a computer program called OPS (Optimization of Plane Structures). The purpose is to meet the optimum geometric configuration taking into account the volume reduction. Different strategies are considered for the positioning of diagonals and struts in the upper chord. It is concluded that the trussed system efficiency depends on the dimensions and the position of the members, where the purlin’s location is not mandatory for struts and diagonal positions.
M. Jamshidi Avanaki , H.e. Estekanchi,
Volume 2, Issue 2 (6-2012)
Abstract
Estimation of collapse performance is primarily conducted through Collapse Fragility Curves (CFC’s). The EDP-based approach is the main scheme for attaining such curves and employs IDA. Obtaining CFC’s from IDA results is tremendously time consuming and computationally demanding. Introduction of more efficient methods of seismic analysis, can potentially improve this issue. The Endurance Time (ET) method is a straightforward method for dynamic analysis of structures subjected to multilevel excitation intensities. In this paper, collapse analysis using ET analysis results to obtain EDP-based CFC’s, has been explained and demonstrated by a model. For verification, the resulting CFC has been compared to that obtained by IDA.
S. Gerist, S.s. Naseralavi , E. Salajegheh,
Volume 2, Issue 2 (6-2012)
Abstract
In damage detection the number of elements is generally more than the number of measured frequencies. Consequently, the corresponding damage detection equation is undetermined and thus has infinite solutions. Since in the damaged structures most of their elements remain healthy, the sparsest solution for the damage detection equation is mostly the actual damage. In the proposed method, the damage equation is first linearized in various ways using random finite difference increments. The sparsest solutions for created linear system of equations are derived using basis pursuit. These solutions are considered as the first population for a continuous genetic algorithm to obtain the damage solution. For investigation of the proposed method three case studies are considered. Simulation results confirm the efficiency of the proposed method compared to those found in the literature.
A. Kaveh, A. Zolghadr,
Volume 2, Issue 3 (7-2012)
Abstract
It is well known that damaged structural members may alter the behavior of the structures considerably. Careful observation of these changes has often been viewed as a means to identify and assess the location and severity of damages in structures. Among the responses of a structure, natural frequencies are both relatively easy to obtain and independent from external excitation, and therefore, could be used as a measure of the structure's behavior before and after an extreme event which might have lead to damage in the structure. Inverse problem of detection and assessment of structural damage using the changes in natural frequencies is addressed in this paper. This can be considered as an optimization problem with the location and severity of the damages being its variables. The objective is to set these variables such that the natural frequencies of the finite element model correspond to the experimentally measured frequencies of the actual damaged structure. In practice, although the exact number of damaged elements is unknown, it is usually believed to be small compared to the total number of elements of the structure. In beams and frames particularly, the necessity to divide the structural members into smaller ones in order to detect the location of the cracks more accurately, deepens this difference. This can significantly improve the performance of the optimization algorithms in solving the inverse problem of damage detection. In this paper, the Charged System Search algorithm developed by Kaveh and Talatahari [1] is improved to comprise the above mentioned point. The performance of the improved algorithm is then compared to the standard one in order to emphasize the efficiency of the proposed algorithm in damage detection inverse problems.
A. Csébfalvi,
Volume 2, Issue 3 (7-2012)
Abstract
In this paper we present a unified (probabilistic/possibilistic) model for resource-constrained project scheduling problem (RCPSP) with uncertain activity durations and a concept of a heuristic approach connected to the theoretical model. It is shown that the uncertainty management can be built into any heuristic algorithm developed to solve RCPSP with deterministic activity durations. The essence and viability of our unified model are illustrated by fuzzy examples presented in the recent fuzzy RCPSP literature.
M.r. Ghasemi, E. Barghi,
Volume 2, Issue 3 (7-2012)
Abstract
In this paper the performance of Artificial Neural Networks (ANNs) and Adaptive Neuro- Fuzzy Inference Systems (ANFIS) in simulating the inverse dynamic behavior of Magneto- Rheological (MR) dampers is investigated. MR dampers are one of the most applicable methods in semi active control of seismic response of structures. Various mathematical models are introduced to simulate the dynamic behavior of MR dampers. The Modified Bouc-Wen model is an appropriate model that has an acceptable accuracy in calculating the generated force of dampers compared to others. In this model displacement and voltage of a MR damper are known while the force generated by MR damper is considered as the unknown. Because of highly nonlinear characteristics of modified bouc-wen model determination of inverse dynamic behavior of MR dampers are generally done using ANNs and ANFIS. Since the ANNs and ANFIS have different mechanisms for emulating desired functions, their responses may be different. In this research the performance of a Back Propagation Neural Network (BPNN), Radial Basis Functions Neural Network (RBFNN) and ANFIS in estimating the inverse dynamic behavior of MR dampers are compared. The results emphasize on the advancement of ANFIS to the other methods studied in estimation of inverse dynamic behavior of MR dampers.
A. Baghlani,
Volume 2, Issue 3 (7-2012)
Abstract
Optimum control of upstream pumping station in open channels with given constraint in downstream end is presented in this paper. The upstream control is capable of minimizing water level fluctuations in the channel in which the downstream pumping station causes an undesirable wave. The proposed method combines an unsteady non-uniform flow solver with shock-capturing capability, Fourier series and metaheuristic firefly algorithm. Fourier series is used to estimate the optimum inflow control and firefly algorithm is utilized to determine the unknown coefficients in the series. With a suitable objective function, the procedure generates the optimum inflow hydrograph that can effectively cancel destructive downstream waves. The results have been compared with the results obtained by a variational approach and show satisfactory improvement both in simplicity and the value of objective function.
A. Kaveh, P. Zakian,
Volume 2, Issue 3 (7-2012)
Abstract
In this article optimal design of shear walls is performed under seismic loading. For practical aims, a database of special shear walls is created. Special shear walls are used for seismic design optimization employing the charged system search algorithm as an optimizer. Constraints consist of design and performance limitations. Nonlinear behavior of the shear wall is taken into account and performance based seismic design optimization is accomplished. Capacity curves of the optimal solution are determined and compared incorporates soil–structure interaction. Also an optimization based method is proposed for bilinear approximation of capacity curve. These are a new methodology for seismic RC shear wall optimum design.
