---

The utilization of passive energy dissipation systems has been created a revolution in the structural engineering industry due to their advantages. Fluid Viscous Damper (FVD) is one of these control systems. It has been used in many different industries, such as the army, aerospace, bridge, and building structures. One of the essential questions about this system is how it can combine with the bracing system to enhance its abilities. In this paper, a comparison between the responses of a twelve-story steel building retrofitted by four layouts of bracings systems (i.e., chevron, diagonal, toggle, and X-brace) is studied. These bracing systems are equipped by FVD to find the optimum layout for these systems. Buildings are modeled nonlinearity and excited by an earthquake (Manjil earthquake). For this purpose, the Fast Nonlinear Analysis (FNA) is performed using the SAP2000 software. The results show that FVD alters some of the structural behaviors such as inter-story drift when combining with a chevron-bracing system. As a result, it can decrease the motion induced by the earthquake significantly. Besides, the results show that the chevron model has the best performance for the high-rise building in comparison with the other studied systems. As a result, for toggle, chevron, and diagonal bracing systems, the formation of link damper could absorb 66%, 72%, and 79% of input energy instead of modal damping energy, respectively.

---

The present study proposes a hybrid of the piecewise constant level set (PCLS) method and isogeometric analysis (IGA) approach for structural topology optimization. In the proposed hybrid method, the discontinuities of PCLS functions is used in order to present the geometrical boundary of structure. Additive Operator Splitting (AOS) scheme is also considered for solving the Lagrange equations in the optimization problem subjected to some constraints. For reducing the computational cost of the PCLS method, the Merriman–Bence–Osher (MBO) type of projection scheme is applied. In the optimization process, the geometry of structures is described using the Non–Uniform Rational B–Splines (NURBS)–based IGA instead of the conventional finite element method (FEM). The numerical examples illustrate the efficiency of the PCLS method with IGA in the efficiency, convergence and accuracy compared with the other level set methods (LSMs) in the framework of 2–D structural topology optimization. The results of the topology optimization reveal that the proposed method can obtain the same topology in lower number of convergence iteration.

---

The artificial neural network is such a model of biological neural networks containing some of their characteristics and being a member of intelligent dynamic systems. The purpose of applying ANN in civil engineering is their efficiency in some problems that do not have a specific solution or their solution would be very time-consuming. In this study, four different neural networks including FeedForward BackPropagation (FFBP), Radial Basis Function (RBF), Extended Radial Basis Function (ERBF), and Generalized Regression Neural Network (GRNN) have been efficiently trained to analyze large-scale space structures specifically double-layer barrel vaults focusing on their maximum element stresses. To investigate the efficiency of the neural networks, an example has been done and their corresponding results have been compared with their exact amounts obtained by the numerical solution.

---

Jellyfish Search (JS) is a recently developed population-based metaheuristic inspired by the food-finding behavior of jellyfish in the ocean. The purpose of this paper is to propose a quantum-based Jellyfish Search algorithm, named Quantum JS (QJS), for solving structural optimization problems. Compared to the classical JS, three main improvements are made in the proposed QJS: (1) a quantum-based update rule is adopted to encourage the diversification in the search space, (2) a new boundary handling mechanism is used to avoid getting trapped in local optima, and (3) modifications of the time control mechanism are added to strike a better balance between global and local searches. The proposed QJS is applied to solve frequency-constrained large-scale cyclic symmetric dome optimization problems. To the best of our knowledge, this is the first time that JS is applied in frequency-constrained optimization problems. An efficient eigensolution method for free vibration analysis of rotationally repetitive structures is employed to perform structural analyses required in the optimization process. The efficient eigensolution method leads to a considerable saving in computational time as compared to the existing classical eigensolution method. Numerical results confirm that the proposed QJS considerably outperforms the classical JS and has superior or comparable performance to other state-of-the-art optimization algorithms. Moreover, it is shown that the present eigensolution method significantly reduces the required computational time of the optimization process compared to the classical eigensolution method.

---

Nowadays, the behavior of designed structures is mostly studied using numerical software products. It is important that the models are sufficiently simple, but the calculated values approximate well the real behavior of the structures. In order for a numerical model to realistically describe the structural behavior, the software used must have material models that are parametrized accordingly. The primary purpose of this article is to create various prefabricated reinforced concrete specific joints in a simply prefabricated RC frame. Thus, in the present study, we examined prefabricated column-cup foundation and column-beam connections. The numerical analyses were carried out in the ATENA 3D software, in which the modeling technique we have developed can be used to examine reinforced concrete structures and structural details at a high level. In these studies, we highlight the differences between linear and nonlinear numerical methodologies. During our investigations, we analyze the joints of the examined frame in separate models on which we operate monotonically increasing vertical and horizontal loads. We examine the obtained load-displacement graphs, the failure of the connections, and the behavior of the elements that make up each connection.
Finally, we extended the relationship by modeling the beam of the frame position, pointing out the behavior of the entire structure.

---

Seismic analysis of structures is a process for estimating the response of structures subjected to earthquakes. For this purpose, the earthquake ­is analyzed using the wavelet theory. In this paper, the primary signal of the earthquake is decomposed through a discrete wavelet transform, and their corresponding response spectrum is obtained. Then, the percentage difference between the decomposed signals and the main one is computed. Therefore, for different earthquakes, a comparison between the response spectrum is studied in various types of dams. The acceleration, velocity, and displacement responses are computed and compared to achieve an appropriate level of decomposition, which can be used instead of the primary signal. Therefore, the decomposition process leads to attaining acceptable accuracy as well as low computational cost. The investigation revealed that the acceleration, velocity, and displacement responses spectrum are suitable up to the third level of decomposition for the small and medium dams, whereas for large dams, up to the fifth level of decomposition is suitable.

---

This study is devoted to seismic collapse safety analysis of performance based optimally seismic designed steel chevron braced frame structures. An efficient meta-heuristic algorithm namely, center of mass optimization is utilized to achieve the seismic optimization process. The seismic collapse performance of the optimally designed steel chevron braced frames is assessed by performing incremental dynamic analysis and determining their adjusted collapse margin ratios. Two design examples of 5-, and 10-story chevron braced frames are illustrated. The numerical results demonstrate that all the performance-based optimal designs are of acceptable seismic collapse safety.

---

Depending on the tectonic activities, most buildings subject to multiple earthquakes, while a single design earthquake is suggested in most seismic design codes. Perhaps, the lack of easy assessment to second shock information and sometimes use of inappropriate methods in estimating these features cause successive earthquakes mainly were ignored in the analysis procedure. In order to overcome to above deficiencies, the learning abilities of artificial neural networks (ANNs) are used in two steps to evaluate the seismic capacity of steel frames consisting moment-resisting frames, ordinary concentrically, and buckling restrained brace (BRB) under critical consecutive earthquakes. For this purpose, peak ground acceleration of second shock (PGA_a) is estimated based on the first shock features in the first step. Next, second ANNs estimate the decreased capacity of the damaged structure for LS and CP performance level according to the proposed PGA_a from the previous step and some seismic and structural features. The results indicate that ANNs are trained to generalize the unseen information very well and reflect good precision in predicting target results in both steps. Finally, the effect of different parameters and repeated shocks is investigated on the seismic performance of mentioned frames. The results show the proper performance of BRB frames in the case of real and repeated earthquakes.
 

---

In this study the challenges of managing the civil projects in oil and gas industry over recent years that failed were investigated. For this purpose, the relevant cases and their effectiveness were categorized by analyzing research data obtained from the questionnaire results. The results obtained from the research showed that there is a positive and significant relationship between the project management knowledge and reduction in the challenges. Lack of attention to the project's feasibility study before starting the project, adverse risks at the beginning and end of the projects, proper knowledge of contracts, and the project team's skill are the items that will fail the project if they are not appropriately managed. Since the team's correct design and the key persons of the project and before that feasibility and the necessity of doing it in vital projects in the country are very important and in such a way, the two components studied in this research are derived from the risk management of projects. Considering the importance of this issue as a case study, these cases were investigated in gas pipeline projects in Fars province.
 

---

In present study, the effects of optimization on seismic energy spectra including input energy, damping energy and yielding hysteretic energy are parametrically discussed. To this end, 12 generic steel moment-resisting frames having fundamental periods ranging from 0.3 to 3s are optimized by using uniform damage and deformation approaches subjected to a series of 40 non-pule strong ground motions. In order to obtain the optimum distribution of structural properties, an iterative optimization procedure has been adopted. In this approach, the structural properties are modified so that inefficient material is gradually shifted from strong to weak areas of a structure. This process is continued until a state of uniform damage is achieved. Then, the maximum energy demand parameters are computed for different structures designed by optimum load pattern as well as code-based pattern, and the mean energy spectra, energy-based reduction factor and the dispersion of the results are compared and discussed. Results indicate that optimum seismic load pattern can significantly affect the energy demands spectra especially in inelastic range of response. In addition, using energy-based reduction factors of optimum structures in short-period and long-period regions will result in respectively overestimation and underestimation of the required input energy demands for code-based structures, reflecting the difference dose exists in reality between the conventional forced-based methodology and energy-based seismic design approach that can more realistically incorporate the frequency content and duration of earthquake ground motions.
 

---

The main purpose of this paper was to use a combination of Energy-based design method and whale algorithm (WOA), hereinafter referred to as E-WOA, to optimize steel moment frames and improve the seismic performance. In E-WOA, by properly estimating the seismic input energy and determining the optimal mechanism for the structure, steel frames are designed based on the energy balance method; according to the results, in a suitable search space, optimization is performed using the WOA algorithm. The objective function of the WOA algorithm, in addition to the frame weight, is meant to improve the behavior of the structure based on the performance level criteria of the ASCE41-17 standard and the uniformity of the drift distribution at the frame height. The results show that the initial design of the Energy method reduces the computational volume of the WOA algorithm to achieve the optimal solution and the plastic hinge pattern in frame is more favorable in the E-WOA method than in the design done by the Energy method.
 

---

This paper presents an efficient wavelet-based genetic algorithm strategy for optimal sensorexciter placement (OSPOEP) in large-scaled structures suitable for time-domain structural identification. For this purpose, a wavelet-based scheme is introduced in order to improve the fitness evaluation of GA-based individuals capable of using adaptive wavelets. A search domain reduction (SDR) strategy is proposed to reduce the wide space of initial unknowns corresponding to enormous degrees-of-freedom in large systems. The proposed reduction strategy is carried out at three stages according to the use of different wavelet functions. Furthermore, a multi-species decimal GA coding system is modified for a competent search around the local optima. In this regards, a local operation of mutation is presented in addition with regeneration and reintroduction operators. It is deduced that, the reliable OSPOEP strategy prior to the time-domain identification will be achieved by those procedures dealing with minimizing the distance of simulated responses for the entire system and condensed system considering the excitation effects. The numerical assessment on the appropriateness and capability of the proposed approach demonstrates the substantially high computational performance and fast convergence of the proposed OSPOEP strategy, especially in large-scaled structural systems. It is concluded that, the robustness of the proposed OSPOEP procedure lies on the precise and fast fitness evaluation at larger sampling rates which resulting in the optimum evaluation of the GA-based exploration and exploitation phases towards the global optimum solution.
 

---

Explosions are inevitable in today’s world; therefore, building structures may be dynamically loaded by an intense loading during the explosion. This is why regulatory bodies have provided instructions for determining the response of structures under the explosion load. Previous research has shown that when the explosion happens close to a structure, the ground explosion load can be modeled as tensile and compressive loads. This research investigates the response of an elastic-plastic single-degree-of-freedom system subjected to different explosive loads with different positive durations. The maximum intensity of blast load and blast duration remains constant, and the positive phase duration is the only variable that changes. The nonlinear dynamic responses of a single-degree-of-freedom system (i.e., displacement, velocity, acceleration, and ductility) are calculated using the linear acceleration method. The results show that increasing the positive phase duration and the amount of positive impact can increase the maximum displacement and ductility of the system. Also, it can be concluded that the maximum acceleration of the studied systems remains constant when the values for the blast impact and positive phase durations change.
 

---

Despite the advantages of the plastic limit analysis of structures, this robust method suffers from some drawbacks such as intense computational cost. Through two recent decades, metaheuristic algorithms have improved the performance of plastic limit analysis, especially in structural problems. Additionally, graph theoretical algorithms have decreased the computational time of the process impressively. However, the iterative procedure and its relative computational memory and time have remained a challenge, up to now. In this paper, a metaheuristic-based artificial neural network (ANN), which is categorized as a supervised machine learning technique, has been employed to determine the collapse load factors of two-dimensional frames in an absolutely fast manner. The numerical examples indicate that the proposed method's performance and accuracy are satisfactory.
 

---

In this article, topology optimization of two-dimensional (2D) building frames subjected to seismic loading is performed using the polygonal finite element method. Artificial ground motion accelerograms compatible with the design response spectrum of ASCE 7-16 are generated for the response history dynamic analysis needed in the optimization. The mean compliance of structure is minimized as a typical objective function under the material volume fraction constraint. Also, the adjoint method is employed for the sensitivity analysis evaluated in terms of spatial and time discretization. The ground structures are 2D continua taking the main structural components (columns and beams) as passive regions (solid) to render planar frames with additional components. Hence, building frames with different aspect ratios are considered to assess the usefulness of the additional structural components when applying the earthquake ground motions. Furthermore, final results are obtained for different ground motions to investigate the effects of ground motion variability on the optimized topologies.
 

---

This paper deals with the optimum design of the mixed structures that consists of two parts, a lower part made of concrete and an upper part made of steel. Current codes and available commercial software packages do not provide analytical solutions for such structural systems, especially if a decoupled analysis is performed where the lower part is excited by ground motion and its response of total accelerations is used for the upper part. Due to irregular damping ratios, mass and stiffness, dynamic response of each part of a mixed structure differs significantly. The present paper aims at comparing of the optimum design of these structures under the coupled and decoupled models. Toward that goal, the coupled and decoupled time history analyses are performed and the optimum design of the two methods are compared. The results of the two approach show that the cost of the decoupled analysis is higher than the cost of the coupled analysis and the design of the decoupled method may be uneconomical, because the interaction between the two upper and lower parts is neglected.
 

---

This paper proposes a method for structural damage detection through the sensitivity analysis of modal shapes in the calculation of modal strain energy (MSE). For this purpose, sensitivity equations were solved to determine the strain energy based on dynamic data (i.e., modal shapes). An objective function was then presented through the sensitivity-based MSE to detect structural damage. Due to the nonlinearity of sensitivity equations, the objective function of the proposed formulation can be minimized through the shuffled shepherd optimization algorithm (SSOA). The first few modes were employed for damage detection in solving the inverse problem. The proposed formulation was evaluated in a few numerical examples under different conditions. The numerical results indicated that the proposed formulation was efficient and effective in solving the inverse problem of damage detection. The proposed method not only minimized sensitivity to measurement errors but also effectively identified the location and severity of structural damage.
 

---

Most industrial-practical projects deal with nonlinearity phenomena. Therefore, it is vital to implement a nonlinear method to analyze their behavior. The Finite Element Method (FEM) is one of the most powerful and popular numerical methods for either linear or nonlinear analysis. Although this method is absolutely robust, it suffers from some drawbacks. One of them is convergency issues, especially in large deformation problems. Prevalent iterative methods such as the Newton-Raphson algorithm and its various modified versions cannot converge in certain problems including some cases such as snap-back or through-back. There are some appropriate methods to overcome this issue such as the arc-length method. However, these methods are difficult to implement. In this paper, a computational framework is presented based on meta-heuristic algorithms to improve nonlinear finite element analysis, especially in large deformation problems. The proposed method is verified via different benchmark problems solved by commercial software. Finally, the robustness of the proposed algorithm is discussed compared to the classic methods.
 

---

Most industrial-practical projects deal with nonlinearity phenomena. Therefore, it is vital to implement a nonlinear method to analyze their behavior. The Finite Element Method (FEM) is one of the most powerful and popular numerical methods for either linear or nonlinear analysis. Although this method is absolutely robust, it suffers from some drawbacks. One of them is convergency issues, especially in large deformation problems. Prevalent iterative methods such as the Newton-Raphson algorithm and its various modified versions cannot converge in certain problems including some cases such as snap-back or through-back. There are some appropriate methods to overcome this issue such as the arc-length method. However, these methods are difficult to implement. In this paper, a computational framework is presented based on meta-heuristic algorithms to improve nonlinear finite element analysis, especially in large deformation problems. The proposed method is verified via different benchmark problems solved by commercial software. Finally, the robustness of the proposed algorithm is discussed compared to the classic methods.

---