Showing 6 results for Nsga-Ii
S. Mokhtarimousavi, H. Rahami, A. Kaveh,
Volume 5, Issue 1 (1-2015)
Abstract
Runway length is usually a critical point in an airport system so, a great interest has been created for optimal use of this runway length. The most important factors in modeling of aircraft landing problem are time and cost while, the costs imposed on the system because of moving away from target times have different performances in terms of impact. In this paper, firstly, aircraft landing problem (ALP) and the works conducted in subject literature are briefly reviewed and presented. Then, this problem is formulated and proposed as a three-objective mathematical modeling which leads to more applicable formulation. Following this, the model introduced to solve this problem is solved for two groups including 20 and 50 aircrafts using the second version of NSGA and the results and recommendations will be provided.
A. Ahmadi Najl, A. Haghighi, H. M. Vali Samani,
Volume 6, Issue 2 (6-2016)
Abstract
The interbasin water transfer is a remedy to mitigate the negative issues of water shortage in arid and semi-arid regions. In a water transfer project the receiving basin always benefits while, the sending basin may suffer. In this study, the project of interbasin water transfer from Dez water resources system in south-west of Iran to the central part of the contrary is
investigated during a drought period. To this end, a multi-objective optimization model is developed based on the Non Dominated Sorting Genetic Algorithm (NSGA-II). The optimum trade-off between the water supply benefits into and out of the Dez River basin as well as energy production is derived. Formulating the problem as a multi-objective
optimization provides a better insight into the gains and losses of a water transfer project. Analyzing the case study, revealed that to reach an acceptable level of reliability for meeting the water demands it is no longer possible to generate hydropower energy with high levels of reliability.
R. Soofifard1, M. Khakzar Bafruei, M. Gharib,
Volume 8, Issue 4 (10-2018)
Abstract
Risks are natural and inherent characteristics of major projects. Risks are usually considered independently in analysis of risk responses. However, most risks are dependent on each other and independent risks are rare in the real world. This paper proposes a model for proper risk response selection from the responses portfolio with the purpose of optimization of defined criteria for projects. This research has taken into account the relationships between risk responses; especially the relationships between risks, which have been rarely considered in previous works. It must be pointed out that not considering or superficial evaluation of the interactions between risks and risk responses reduces the expected desirability and increases project execution costs. This model is capable of optimization of different criteria in the objective function based on the proposed projects. Multi-objective Harmony Search (MOHS) and Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve this model and the numerical results obtained are analyzed. Finally, it was observed that ranges of objective functions in MOHS are better than those in NSGA-II.
N. Khaledy, A. R. Habibi, P. Memarzadeh,
Volume 9, Issue 1 (1-2019)
Abstract
Design of blast resistant structures is an important subject in structural engineering, attracting the attention of governments, researchers, and engineers. Thus, given the benefits of optimization in engineering, development and assessment of optimization methods for optimum design of structures against blast is of great importance. In this research, multi-objective optimization of steel moment frames subjected to blast is investigated. The considered objectives are minimization of the structural weight and minimization of the maximum inter-story drifts. The minimization of weight is related to obtain low cost designs and the minimization of inter-story drifts is related to obtain higher performance designs. By proposing a design methodology, a framework is developed for solving numerical problems. The developed framework is constructed by combining explicit finite element analysis of the structure and the NSGA-II optimization algorithm. The applicability and efficiency of the proposed method is shown through two numerical examples.
S. Bakhshinezhad, M. Mohebbi,
Volume 10, Issue 3 (6-2020)
Abstract
In this paper, a procedure has been introduced to the multi-objective optimal design of semi-active tuned mass dampers (SATMDs) with variable stiffness for nonlinear structures considering soil-structure interaction under multiple earthquakes. Three bi-objective optimization problems have been defined by considering the mean of maximum inter-story drift as safety criterion of structural components, absolute acceleration as the criterion of occupants’ convenience, and safety of non-structural acceleration sensitive components, as well as SATMD relative displacement as the cost criterion of the control device. The parameters of the weighting matrices of the instantaneous optimal control algorithm and the maximum and minimum level of variable stiffness of the semi-active device have been considered as design variables. An improved version of the non-dominated sorting genetic algorithm (NSGA-II), has been employed to solve the optimization problems and figure out the set of Pareto optimal solutions. SATMDs with different mass ratios have been designed for an eight-story shear type building with bilinear elasto-plastic stiffness model where the soil-structure interaction has been incorporated by Cone model with three degrees of freedom for the soil. Results show the capability and simplicity of the proposed procedure to design SATMDs considering multiple performance criteria. It is observed that this procedure can offer a wide range of optimal solutions throughout the Pareto front which can be chosen by the designer based on desired performance and application of the structure.
M. Payandeh-Sani , B. Ahmadi-Nedushan,
Volume 13, Issue 2 (4-2023)
Abstract
In this study, the response of semi-actively controlled structures is investigated, with a focus on the effects of magneto-rheological (MR) damper distribution on the seismic response of structures such as drift and acceleration. The proposed model is closed loop, and the structure's response is used to determine the optimal MR damper voltage. A Fuzzy logic controller (FLC) is employed to calculate the optimum voltage of MR dampers. Drifts and velocities of the structure’s stories are used as FLC inputs. The FLC parameters and the distribution of MR dampers across stories are determined using the NSGA-II, when the structure is subjected to the El-Centro earthquake, so as to minimize the peak inter-story drift ratio and peak acceleration simultaneously. The efficiency of the proposed approach is illustrated through a twenty-story nonlinear benchmark structure. Non-dominated solutions are obtained to minimize the inter-story drift and acceleration of structures and Pareto front produced. Then, the non-dominated solutions are used to control the seismic response of the benchmark structure, which was subjected to the Northridge, Kobe, and Hachinohe earthquake records. In the numerical example the maximum drift and acceleration decrease by about 36.3% and 15%, respectively, in the El-Centro earthquake. The results also demonstrate that the proposed controller is more efficient in reducing drift than reducing acceleration.
