---

Tuned mass dampers (TMDs) systems are one of the vibration controlled devices used to reduce the response of buildings subject to lateral loadings such as wind and earthquake loadings. Although TMDs system has received much attention from researchers due to their simplicity, the optimization of properties and placement of TMDs is a challenging task. Most research studies consider optimization of TMDs properties. However, the placement of TMDs in a building is also important. This paper considers optimum placement as well as properties of TMDs. Genetic algorithms (GAs) is used to optimize the location and properties of TMDs. Because the location of TMDs at a particular floor of a building is a discrete number, it is represented by binary coded genetic algorithm (BCGA), whereas the properties of TMDS are best suited to be represented by using real coded genetic algorithm (RCGA). The combination of these optimization tools represents a hybrid coded genetic algorithm (HCGA) that optimizes discrete and real values of design variables in one arrangement. It is shown that the optimization tool presented in this paper is stable and has the ability to explore an unknown domain of interest of the design variables, especially in the case of real coding parts. The simulation of the optimized TMDs subject to earthquake ground accelerations shows that the present approaches are comparable and/or outperform the available methods.

---

Tuned mass damper (TMD) have been studied and installed in structures extensively to protect the structures against lateral loads. Multiple tuned mass dampers (MTMDs) which include a number of TMDs with different parameters have been proposed for improving the performance of single TMDs. When the structural system is considered as multiple degrees of freedom (MDOF) and implemented with MTMDs, there is no effective closed-form solution to determine the optimal parameters of MTMDs. On the other hand designing optimal MTMDs include a large number of variables. For optimal design of MTMDs, in this research an effective method has been proposed in which the parameters of TMDs are determined based on minimizing the Hankel’s norm of structure. Since the optimization procedure includes a large number of variables, hence it has been decided to use Genetic Algorithms (GAs) for determining the variables. For numerical simulation, the method has been utilized on an eight-storey shear frame modeled as MDOF, and optimal MTMDs have been designed. The results show that using the Hankel’s norm of structure as objective function has led to design effective MTMDs which could be effective in reducing the response of structure, especially the average value, under different far-field and near-field earthquakes. Also it has been found that the method is effective regarding its simplicity and convergence in solving complex optimization problem. Through extensive numerical analysis the effect of MTMDs mass ratio and TMDs number in MTMDs has been studied.

---

This paper investigates the optimized parameters of Tuned Mass Dampers (TMDs) for high-rise structures considering Soil Structure Interaction (SSI) effects. Three optimization methods, namely the ant colony optimization (ACO) technique together with artificial bee colony (ABC) and shuffled complex evolution (SCE) methods are utilized for the optimization of TMD Mass, damping coefficient and spring stiffness as the design variables. The objective is to decrease the maximum displacement of structure. The 40 story structure with three soil types is employed to design TMD for six types of far field earthquakes. The results are then utilized to obtain relations for the optimized TMD parameters with SSI effects. The relations are then applied to design TMD for the same structure with another five types of far field oscillations, and reasonable results are achieved. For further investigations, the obtained relations are utilized to design TMD for a new structure, and the reduction values are obtained for five types of earthquakes, which show acceptable results. This study improves the understanding of earthquake oscillations, and helps the designers to achieve the optimized TMD for high-rise buildings.

---

In this research, optimal design and assessment of multiple tuned mass dampers (MTMDs) capability in mitigating the damage of nonlinear steel structures subjected to earthquake excitation has been studied. Optimal parameters of TMDs on nonlinear multi-degree-of-freedom (MDOF) structures have been determined based on minimizing the maximum relative displacement (drift) of structure where for solving the optimization problem the genetic algorithm (GA) has been used successfully. For numerical analysis, three and nine storey 2-D moment resisting nonlinear steel frames subjected to far-field and near-field earthquakes and optimal MTMDs has been designed for different values of mass ratio and TMDs number. According to the results of numerical simulations, it can be said that MTMDs mechanism could reduce the damage of nonlinear steel structures where the effectiveness increases by increasing TMDs mass ratio. Also the performance of MTMDs depends on earthquake characteristics, mass ratio and TMDs configuration where in this research the effective case has been locating TMDs on top floor in parallel configuration.

---

The main focus of this research has been to investigate the effectiveness of optimal single and multiple Tuned Mass Dampers (TMDs) under different ground motions as well as to develop a procedure for designing TMD and MTMDs to be effective under multiple records. To determine the parameters of TMD and MTMDs under multiple records various scenarios have been suggested and their efficiency has been assessed. For numerical simulations, a ten-story linear shear building frame subjected to 12 real earthquakes as well as a filtered white noise record and optimum parameters of TMDs and MTMDs have been determined by solving an optimization problem using genetic algorithm (GA). The results show that when designing optimal TMD and MTMD under a specific ground motion, using the optimization procedure leads to achieve the best performance while the characteristics of the design earthquake strongly affects the performance of TMDs. Furthermore, it has been found that TMDs and MTMDs designed using only one earthquake as the design record have not worked successfully under multiple ground motions. For determining the parameters of TMDs to be effective under multiple records it has been suggested to use the mean of optimal TMDs parameters obtained using each of the design records.

---

Many researches have focused on the optimal design of tuned mass damper (TMD) system without the effect of soil–structure interaction (SSI), so that ignoring the effect of SSI may lead to an undesirable and unrealistic design of TMD. Furthermore, many optimization criteria have been proposed for the optinal design of the TMD system. Hence, the main aim of this study is to compare different optimization criteria for the optimal design of the TMD system considering the effects of SSI in a high–rise building. To acheive this purpose, the optimal TMD for a 40–storey shear building is firstly evaluated by expressing the objective functions in terms of the reduction of structural responses (including the displacement and acceleration) and the limitation of the scaled stroke of TMD. Then, the best optimization criterion is selected, which leads to the best performance for the vibration control of the structure. In this study, the whale optimization algorithm (WOA) is employed to optimize the parameters of the TMD system. The numerical results show that the soil type and selected objective function efficiently affect the optimal design of the TMD system.

---

In this paper, a procedure has been presented to develop fragility curves of structures equipped with optimal variable damping or stiffness semi-active tuned mass dampers (SATMDs). To determine proper variable damping or stiffness of semi-active devices in each time step, instantaneous optimal control algorithm with clipped control concept has been used. Optimal SATMDs have been designed based on minimization of maximum inter-story drift of nonlinear structure which genetic algorithm(GA) has been used to solve the optimization problem. For numerical analysis, a nonlinear eight-story shear building with bilinear hysteresis material behavior has been used. Fragility curves for the structure equipped with optimal variable damping and stiffness SATMDs have been developed for different performance levels and compared with that of uncontrolled structure as well as structure controlled using passive TMD. Numerical analysis has shown that for most range of intensity measure optimal SATMDs have been effective in enhancement of the seismic fragility of the nonlinear structures which the improvement has been more than passive TMDs. Also, it has been found that, although variable stiffness SATMD shows to be more reliable in lower mass ratios, however in higher mass ratios variable stiffness and damping SATMDs performs similarly to improve reliability of the structure.

---

Active tuned mass damper (ATMD) systems have attracted the considerable attention of researchers for protecting buildings subjected to earthquake loading. This paper presentes the development of an optimal sliding mode control (OSMC) system for a building equipped with ATMD. In the OSMC technique, a linear sliding surface is used with the slope of this surface designed such that a given (or desired) cost function is minimized. The design is obtained by transforming the system into the regular form. In the regular form, the system is divided into two subsystems inclding: a control term explicitly appears, and other control terms do not appear. In order to demonstrate the capability of the OSMC system, an 11–story realistic building with a TMD installed on the top story of the structure is considered. For achieving this purpose, four well–known earthquake records are selected to evaluate the performance of the OSMC system. Results show that the OSMC technique performs better than other control techniques in the reduction of seismic responses of the structure.

---

In this paper, a procedure has been introduced to the multi-objective optimal design of semi-active tuned mass dampers (SATMDs) with variable stiffness for nonlinear structures considering soil-structure interaction under multiple earthquakes. Three bi-objective optimization problems have been defined by considering the mean of maximum inter-story drift as safety criterion of structural components, absolute acceleration as the criterion of occupants’ convenience, and safety of non-structural acceleration sensitive components, as well as SATMD relative displacement as the cost criterion of the control device. The parameters of the weighting matrices of the instantaneous optimal control algorithm and the maximum and minimum level of variable stiffness of the semi-active device have been considered as design variables. An improved version of the non-dominated sorting genetic algorithm (NSGA-II), has been employed to solve the optimization problems and figure out the set of Pareto optimal solutions. SATMDs with different mass ratios have been designed for an eight-story shear type building with bilinear elasto-plastic stiffness model where the soil-structure interaction has been incorporated by Cone model with three degrees of freedom for the soil. Results show the capability and simplicity of the proposed procedure to design SATMDs considering multiple performance criteria. It is observed that this procedure can offer a wide range of optimal solutions throughout the Pareto front which can be chosen by the designer based on desired performance and application of the structure.

---

Passive systems are preferred tools for seismic control of buildings challenged by probabilistic nature of the input excitation. However, other types of uncertainty still exist in parameters of the control device even when optimally tuned. The present work concerns optimal design of multiple-tuned-mass-damper embedded on a shear building by a number of meta-heuristics. They include well-known genetic algorithm and particle swarm optimization as well as more recent gray wolf optimizer and its hybrid method embedding swarm intelligence. The study is two-fold: first, optimal designs by different meta-heuristics are compared concerning their reduction in structural seismic responses; second, the effect of uncertainty in Multi-Tuned-Mass-Damper parameters, is studied offering new reliability-based curves. Monte Carlo Simulation is employed to evaluate failure probabilities. A variety of structural responses are assessed against seismic excitation including maximal displacement, velocity and acceleration. It is declared that the best algorithm for efficiency and effectiveness has not coincided the best based on the reliability traces. Such traces also show that in a specific range of limit-states, algorithm selection has a serious effect on the reliability results. It was found even more than 35% and depends on the response type.  

---

The multiple tuned mass dampers (MTMDs) are considered among the control systems used for reducing the vibration of buildings under seismic excitations. A large number of the previous studies have mainly emphasized on the utilization and effectiveness of MTMD on linear structure responses, and few of them have investigated the effectiveness of MTMD on nonlinear multi-degree of freedom structures. Thus, in this paper, the effectiveness of MTMD on nonlinear buildings have been investigated. The effectiveness of the MTMD systems lies in their parameters, and the location of dampers in buildings. Accordingly, the optimization of MTMD’s properties, as well as its location, are taken into account in the present study. The Mouth Brooding Fish algorithm, which is a new optimization method is utilized for optimizing the properties corresponding to the MTMD system. The effectiveness levels of the MTMDs were compared with the efficiency of an equal optimally tuned mass damper (TMD), which was placed on the top of the building. The results of these comparisons revealed that MTMDs have provided a better efficiency compared to TMDs in reducing the maximum displacement of nonlinear structures. Moreover, MTMDs have a higher effectiveness when placed on different floors of the building.

---

Some structural control systems have been devised to protect structures against earthquakes, which the tuned mass damper (TMD) being one of the earliest. The effect of a tuned mass damper depends on its properties, such as mass, damping coefficient, and stiffness. The parameters of tuned mass dampers need to be tuned based on the main system and applied load. In most of the papers, the parameters of TMDs have been tuned based on the nominal parameters of structures. Also, most of the studies considered the minimization of maximum displacement of structure as the objective function of optimizing the parameters of tuned mass dampers. In this study, according to the Monte Carlo method and using the Mouth Brooding Fish algorithm, TMDs have been optimized based on the reliability of structures regarding the uncertain parameters of buildings, and their efficiency in the reduction of maximum displacement and failure probability of hundreds generated buildings with uncertain parameters, are compared with the efficiency of the displacement-based optimized TMDs. The results show that the TMDs optimized regarding uncertainty have better efficiency in reducing the maximum displacement, and failure probability of buildings than the TMDs optimized regarding nominal parameters of buildings. Also, according to the results, the displacement-based optimized TMDs regarding uncertainty show better efficiency in reducing the failure probability and displacement of the buildings than reliability-based optimized TMDs.