• Education

• Ph.D., Mechanical Engineering Department, McGill University, (1995).
• M. Eng., Mechanical Engineering Department, McGill University, (Jan. 1991).
• B.Sc., School of Mechanical Engineering, Iran University of Science and Technology, (1984).

• Professor, Iran University of Science and Technology, (1996-now).
• Associate Professor, Iran University of Science and Technology, (2002-2006).
• Assistant Professor, Iran University of Science and Technology, (1996-2002).
• General Secretary of Advanced Materials and Manufacturing Council, (2015-Now).
• Member of Professors Promotion Committee of Iran University of Science and Technology, (2014-now).
• Member of Professors Recruitment Committee of Iran University of Science and Technology, (2004-now).
• Member of Trustee Council of Technology Studies Research Center, (2013-now).
• President of Iran Scientific Composites Association, (2012-now)
• Member of the Coordination Commission of Science, Research and Technology Council, (2010-now).
• Director of Composite Materials and Technology Center, (2009-now)
• Chairman of the Mechanical Engineering Department, Iran University of Science and Technology, (2006–2008)
• Member of Professors Promotion Committee of Iran University of Science and Technology, (2004-2009).
• Member of Professors Promotion Committee of Semnan University, (2007-2009).
• President of Iran Industrial Composites Association, (2004-2009)
• Chairman of Iran Composites Institute, (1999-now).
• Research Deputy of Mechanical Engineering Dept., Iran University of Science and Technology, (1999-2001).
• Scientific Consultant of Presidency Technology Cooperation Office, (1996-Now).
• Scientific Consultant of Fajr Aviation and Composite Materials Center, (1996-2002).
• R & D Manager, Sap Institute, (1997–2004).

• Member of Advisory Board of Iranian Journal of Engineering Education, (2017-now).
• Member of Editorial Board of Journal of Stress Analysis, (2016-now).
• Member of Editorial Board of Trends in Applied Sciences Research, (2016-now).
• Chief Editor of the Journal of Science and Technology of Composites, (2014-now).
• Member of Editorial Board of Journal of Engineering Solid Mechanics, (2013-now).
• Member of Editorial Board of Basparesh Magazine, (2012–now).
• Member of Editorial Board of International Journal of Composite Materials, (2012-Now).
• Member of Editorial Board of Journal of Mechanical Research and Application Azad University, (2008–now).
• Member of Editorial Board of Modares Technical and Engineering Journal, (2007–now).
• Member of Editorial Board of Journal of High Energy Materials, (2006–now).
• Chief Editor of Composites Bulletin, Iran Composites Institute, (2001-now).
• Editor of the Journal of Iranian Mechanical Engineering, (1998-2000).

• Composites and Nanocomposites Materials and Structures research Chair Awards, Iranian National Science Foundation, 2018.
• Distinguished Professor, Academy of Sciences of Iran, 2018.
• The Scientist with a World Ranking of one Percent, Thompson Reuters, 2017.
• Distinguished Professor of Iran University of Science and Technology, 2016.
• Distinguished researcher of the country, Ministry of Science, Research and Technology, Iran, 2015.
• Distinguished Technologist of Tehran Province, Tehran Governor, 2015.
• Selected Prof. Alameh Tabatabaei National Award (most prestigious scientific award in Iran), National Elite Foundation, 2015.
• Distinguished Professor of the University (second rank of research), Iran University of Science and Technology, 2015.
• Distinguished Professor of the University (Third rank of the high cited author), Iran University of Science and Technology, 2015.
• Distinguished Professor of School of Mechanical Engineering (first rank), Iran University of Science and Technology, 2015.
• Distinguished Professor of School of Mechanical Engineering (first rank of non-industrial research), Iran University of Science and Technology, 2014.
• Distinguished Professor of the University (second rank of non-industrial research), Iran University of Science and Technology, 2014.
• Distinguished Professor of the University (second rank of the high cited author), Iran University of Science and Technology, 2014.
• Distinguished Professor of the University, Iran University of Science and Technology, 2013.
• Distinguished Professor of the School of Mechanical Engineering, Iran University of Science and Technology, 2013.
• Distinguished Professor of the University, Iran University of Science and Technology, 2012.
• Distinguished Professor of the University, Iran University of Science and Technology, 2010.
• Supervision of the Best Bachelor Thesis of the year 2010, Iranian Society of Mechanical Engineers.
• Distinguished Professor of the University, Iran University of Science and Technology, 2009.
• Supervision of the Best Bachelor Thesis of the year 2008, Iranian Society of Mechanical Engineers.
• Distinguished Professor of the Country, Islamic Republic of Iran, 2007.
• Distinguished Professor of the University, Iran University of Science and Technology, 2007.
• Khawrazmi International Festival Award (the most prestigious scientific award in Iran,), 2007.
• Best Reviewer of the Iranian Aerospace conference, Iran, 2006.
• TICME2005, Best Paper Prize, Tehran International Congress on Manufacturing Engineering, 2005.
• Supervision of the Best Bachelor Thesis of the year 2005, Iranian Society of Mechanical Engineers.
• Best Research Project, National Iranian Gas Company, 2004.
• Scientific Development Award, Khatam Festival, Iran University of Science and Technology, (2004).
• Best Research Project, Iran Helicopter Support and Renewal Co (Panha Co), 2003.
• Supervision of the Best Master’s Thesis of the year 2002, Iranian Society of Mechanical Engineers.
• Supervision of the Best Master’s Thesis of the year 2002, Khawrazmi Festival.
• Distinguished paper of Islamic Republic of Iran Broadcasting Conference, 2001.
• Distinctive Researcher, Mechanical Engineering Department, Iran University of Science and Technology, 2000.
• Selected Professor, Mechanical Engineering Department, Iran University of Science and Technology, 1999.
• Selected Professor, Iran University of Science and Technology, 1998.
• Post Doctorate, Natural Science and Engineering Research Council of Canada, 1995-1996.

• Chair of the Sixth International Conference on Composites: Characterization, Fabrication and Application, 2018.
• Chair of the International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2018)
• Chair of the Fifth International Conference on Composites: Characterization, Fabrication and Application, 2016.
• Chair of the International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2016)
• Scientific Chair of the First International Conference on Composite Pipes, Vessels and Tanks, 2015.
• Chair of the Fourth International Conference on Composites: Characterization, Fabrication and Application, 2014.
• Chair of the International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2014)
• Scientific Chair, 1^st Conference on Oil and Gas Storage Tanks, 2013.
• Chair of the Third International Conference on Composites: Characterization, Fabrication and Application, 2012.
• Chair of the International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2012)
• Chair of the Second International Conference on Composites: Characterization, Fabrication and Application, 2010.
• Chair of the First International Conference on Composites: Characterization, Fabrication and Application, 2008.

• International Conference on Materials and Metallurgical Engineering, Iran, 2017.
• China Nano 2017, Beijing, China, 2017.
• The First Festival of Composites Business in Iran, 2017.
• Skoltech University, Skolkovo, Russia, 2017.
• The First International Conference on Composite Pipes, Vessels and Tanks, Tehran, Iran, 2015.
• The Fourth International Conference: Characterization, Fabrications and Application, Tehran, Iran, 2014.
• The Third International Conference: Characterization, Fabrications and Application, Tehran, Iran, 2012.
• The International Conference on Experimental Solid Mechanics and Dynamics, 2012.
• The First International Symposium in Commercialization and Export of High Technology Products, 2010.
• The Second International Conference: Characterization, Fabrications and Application, Kish Island, Iran, 2010.
• The First International Conference: Characterization, Fabrications and Application, Kish Island, Iran, 2009.
• International Conference on Composite Material Nano Structure, IC2MS08, Malaysia, 2008.
• First International Conference in Zeolite, Amirkabir University, Iran, 2008.
• The 7^th Conference of Iranian Aerospace Society, Sharif University, Iran, 2008.
• 1st CNG Composite Cylinder Symposium, Iran, May 26, 2007.
• International Conference on Composite Materials and Nano-Structures (IC2MS-06), Malaysia, 2006.
• Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran.
• Sixth Scientific and Student Conference on Materials and Metallurgy in Iran, 2004.

• Founder of Iran Composites Scientific Association, 2010.
• Founder of Iran Composites Industrial Association, 2003.
• President of Iran Composites Association, from 2004 to 2009.
• Founder of Iran Inventors Association, 2002.
• Founder of Iran Association Management of Technology, 2004.
• Member of Composite Fabricator Association, (CFA), from 2004.
• Member of International Institute for FRP in Construction, (IIFC), From 2004.

• Fire retardant polymer based coating, 2017, Iran.
• Design and manufacturing of a displacement control fatigue tester, 2013, Iran.
• Anticorrosion composites using nanoparticles, 2012, Iran.
• Nano graphene/vinyl ester anticorrosion nanocomposites, 2012, Iran.
• Electrically conductive polymeric composite material, United States Patent, US 8,105,505 B2, USA, 2012.
• Automatic measurement of crack length and cark opening displacement of laminated composites using an image processing method, 2011, Iran.
• Repair of a perforated metallic pipe using polymer composites, 2011, Iran.
• Measurement of residual stresses in polymeric composites using the slitting method, 2011, Iran
• Design and manufacturing of glass fiber production system using the indirect melting method, 2011, Iran.
• Manufacturing of a system for measuring the length and the location of the delamination crack front of laminated composites, 2011, Iran.
• Full-scale and full-stochastic multi-scale process to predict elastic properties of CNT/Polymer Composites, 2011, Iran.
• Polymer concrete composite water distillation slab, 2010, Iran.
• Repair and reinforcement of Corroded metallic pipes under internal pressure using composite materials, 2010, Iran.
• Design and manufacturing of an electrically conductive and chemically resistant polymer composite, 2008, Iran.
• Replacement of the lead grid in lead-acid battery with carbon/vinyl ester resin, 2008, Iran.
• A fixture for determining the mechanical property degradation of polymer composites in bending loading condition under stress corrosion, 2008, Iran.
• Design and manufacturing of a fixture for measurement of specific surface and volume resistance, 2008, Iran.
• Manufacturing of a light polymer concrete with glass fibers and sand, 2006, Iran.
• The weaving of Fiberglass woven fabric, 2005, Iran.
• Internal reinforcement of concrete with the waste of polymer composites, 2004, Iran.
• Design and manufacturing of an impact tester, 2004, Iran.
• Reinforcement of aluminum plates with composite materials, 2003, Iran.
• Design and manufacturing of composite flat spring, 2002, Iran.
• Measurement of residual stresses in composite materials, 2002, Iran.
• Reinforcement of concrete using composite materials, 2001, Iran.

• Strategy development of composite materials technology in Iran, Iranian Science and Technology Deputy of Presidency, 2010.
• Strategy development of composite materials technology in Iran, Iranian Ministry of Industries and Mining, 2005.
• Strategy development of investment on polymer composite materials in Iran, Industrial Development and Renovation Organization of Iran, 2005.

• Reinforcement of corroded oil tank #9012, Lavan Island, 2018.
• Reinforcement of corroded oil tank #9002, Lavan Island, 2017.
• Reinforcement of corroded oil tank # 9117, Lavan Island, 2017.
• Reinforcement of corroded oil tank TK-8101-B, Fajr Jam Co., Asalooyeh, 2016.
• Reinforcement of corroded oil tank TK-8101-C, Fajr Jam Co., Asalooyeh, 2015.
• Reinforcement of corroded Flare pipe, Forozan platform in Khark Island, Fajr Jam Co., Asalooyeh, 2015.
• Reinforcement of corroded oil pipe, Forozan platform in Khark Island, Fajr Jam Co., Asalooyeh, 2015.
• Reinforcement of de-salter tank using composite materials, National Iranian South Oilfields Company, 2014.
• Reinforcement of corroded oil tank, Lavan Oil Refining Company, Lavan Island, 2014.
• Reinforcement of concrete structures of water distillation plant of Bandar Abbas, 2013.
• Reinforcement of the Corroded acid transportation pipes, Zobe Ahan Esfahan Co., 2012.
• Design and Manufacturing of the Composite Dome for the School of Computer Engineering of Iran University of Science and Technology, 2012.
• Reinforcement of Damaged Concrete, Zobe Ahan Esfahan Co., 2012.
• Design and Manufacturing of Water Distillation Slab using Polymer Concrete, Zobe Ahan Esfahan Co., 2012.
• Design and Manufacturing of Water Distillation Slab using Polymer Concrete, Jalalieh Water Organization Co., 2010.
• Reinforcement of Oil Tanks, Siri Island, NIOC, 2010.
• Reinforcement of Corroded Pipes, Abadan Oil Refinery Plant, 2009.
• Design and Manufacturing of a Fire Distinguisher for a helicopter, Havanirooz, 2009.
• Design and Manufacturing of Fiberglass Pilot plant, Ministry of Industry, 2008.
• Design and Manufacturing of a Melting Guide using Composite Materials, Kani Mes Co., 2007.
• Design of a Composite Boat, Jolaee Co., 2007.
• Reinforcement of Concrete Structure of Abadan Oil Refinery Plant, 2006.
• Design and manufacturing of the floating system for a helicopter, Havanirooz, 2006.
• Design and manufacturing of the structure of a helicopter simulator with composite material, Havanirooz, 2006.
• Reinforcement of two Concrete Rail Road Bridges with Composite Materials, 2006.
• Design and manufacturing of a composite shell under external pressure, Satari Co., 2005.
• Design and manufacturing of composite pressure vessel, Eslami Co., 2005.
• Reinforcement of the heritage buildings, Iranian Ministry of Science, Research and Technology, 2005.
• Design and manufacturing of Composite belts of fiber optic manufacturing machine, Ghandi Co., 2004.
• Reinforcement of corroded gas pipes, National Iranian Gas Co., 2003.
• Reinforcement of the engine hood of Toyota car with composites, Fath Automaker Co., 2002.
• Reinforcement of the engine hood of Land Rover car with composites, Moratab Car Manufacturer Co., 2002.
• Design and manufacturing of the canopy of a helicopter, Havanirooz, 2002.
• Design and manufacturing of an electrical switch box, Tavanir Co., 2002.
• Technology transfer of composite wind turbine blade from Vestas Co. to Sadid Sabaniroo, 2002.
• Design and manufacturing of windshield of a helicopter, 2001.
• Residual stresses in composite materials, Fajr Aviation and Composites Industry, 2001.
• Design and manufacturing of a drop weight impact tester, National Research Projects, 2001.
• Design and manufacturing of a composite helicopter Radom, Iran Helicopter Support and Renewal Co. (Panha Co.), 2000.
• Establishment of a design and standardization office, Sap Co., 1999.
• Design of a composite pressure vessel, Karimi Co., 1999.
• Sensitivity analysis of composite materials, Karimi Co., 1999.

• Theory of Elasticity, Mechanical Engineering Department, Iran University of Science and Technology, (2005 - Now)
• Engineering Mechanics, Statics, Mechanical Engineering Department, Iran University of Science and Technology, (1998 - Now)
• Introduction to Mechanics of Composite Materials, Mechanical Engineering Department, Iran University of Science and Technology, (1996-Now)
• Design of Aircraft Structures, Mechanical Engineering Department, Iran University of Science and Technology, (1996-Now)
• Mechanics of Materials, Mechanical Engineering Department, Iran University of Science and Technology, (1996-Now)
• Finite Element Analysis, Saba Research Center, Tehran, Iran, (1986-1990).

• Bachelor of Engineering: 70 Theses
• Masters of Engineering: 79 Theses
• Ph.D.: 12 Theses

• Mechanics of Composite Materials
• Mechanics of Nano-Composites
• Stress and Failure Analysis of Composite Materials
• Fatigue Analysis of Composite Materials
• Experimental Methods in Composite Materials
• Finite Element Analysis
• Solid Mechanics
• Structural Optimization

• Mahmood M. Shokrieh, Seyed Mohammad Ghoreishi and Masood Esmkhani, “Toughening mechanisms of nanoparticle-reinforced polymers,” Chapter 11, Toughening Mechanisms in Composite Materials, Eds., Q. Qin, J. Ye (2015), Woodhead Publisher.
• Rafiee, R., Shokrieh, M. M., “Prediction of Mechanical Properties of CNT Based Composites Using Multi-Scale Modeling and Stochastic Analysis,” in Modeling of Carbon Nanotubes, Graphene and their Composites, Eds. Konstantinos I. Tserpes, Nuno Silvestre, Springer Series in Materials Science Volume 188, 2014, pp 201-238 (2014).
• Mahmood M. Shokrieh, Residual Stresses in Composites Materials,” Woodhead Publisher, 2013.
• Mahmood M. Shokrieh and Fathollah Taheri B., Fatigue Life Prediction of Composites and Composites Structures, Chapter 8, Fatigue Life Prediction of Composite Materials based on Progressive Damage Modeling," Woodhead Publisher, 2010.
• Mahmood M. Shokrieh and Roham Rafiee, Fatigue Life Prediction of Composites and Composites Structures, Chapter 14, Fatigue Life Prediction of Wind Turbine Rotor Blades manufactured from Composites," Woodhead Publisher, 2010.
• Mahmood M. Shokrieh and Larry B. Lessard, Fatigue under Multiaxial Stress Systems, Chapter 3, Fatigue in Composites, Woodhead Publisher, 2004.

1. H. Nopour, A. Kabiri Ataabadi, M. M. Shokrieh, “Fiber path optimization of a variable stiffness cylinder for maximizing the buckling load under external hydrostatic pressure” Mechanics of Composite Materials, Accepted, 2018.
2. M. Azadian, H. Hasani, M.M. Shokrieh, “Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels,” In Persian, Journal of Science and Technology of Composites, accepted, 2018.
3. A. Mirdehghan, H. Nosraty, M. M. Shokrieh, R. Ghasemi and M. Akhbari “Micro-mechanical Modeling of the Compression Strength of Three-Dimensional Integrated Woven Sandwich Composites,” Journal of Industrial Textiles, accepted, 2018.
4. H. Rahnama, M.M. Shokrieh, “Axisymmetric Equilibrium of an Isotropic Elastic Solid Circular Finite Cylinder,” Mathematics and Mechanics of Solids, accepted, 2018.
5. M. Azadian, H. Hasani, M.M. Shokrieh, “Flexural Behavior of Composites Reinforced with Innovative 3D Integrated Weft-knitted Spacer Fabrics,” Journal of Industrial Textiles, accepted, 2017.
6. M. M. Shokrieh, A. Daneshvar, “A novel technique to simulate reduce residual stresses in laminated composites using nanoparticles,” Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, accepted, 2016.
7. R. Chitsaz Dehaghani, M.M. Shokrieh and F. Taheri-Behrooz, “An investigation on effects of acid etching duration on adhesive bonding of polyethylene to E-glass/epoxy composites Article,” International Journal of Adhesion and Adhesives 85 (2018) 177–183.
8. S. M. R. Koloor, H. Moshrefzadeh-Sani, S. M. Hashemianzadeh, M. M. Shokrieh, “On the behavior of isolated and embedded carbon nano-tubes in a polymeric matrix,” Materials Research Express, Mater.Res.Express 5 (2018) 025019.
9. M. Kharratzadeh-Khorasgani1, M. M. Shokrieh, M. Salamt-talab, “Experimental investigation of delamination growth in laminated composites made of plain woven fabric/epoxy with 0//θ Interface,” Modares Mechanical Engineering, Vol. 18, No. 05, pp. 309-315, 2018 (in Persian).
10. S. M. R. Koloor, S. M. Hashemianzadeh, M. M. Shokrieh, “Effect of CNT Structural Defects on the Mechanical Properties of CNT/Epoxy Nanocomposite, Physica B: Condensed Matter 540 (2018) 16–25.
11. Z. Shokrieh, M. Seifi, M. M. Shokrieh, “Simulation of stiffness of randomly-distributed-graphene/epoxy nanocomposites using a combined finite element-micromechanics method”, Mechanics of Materials, Mechanics of Materials 115 (2017) 16–21.
12. A. Mirdehghan, H. Nosraty, M. M. Shokrieh, M. Akhbari, "The structural and tensile properties of Glass/Polyester co-wrapped hybrid yarns," Journal of Industrial Textiles, 2018, Vol. 47(8) 1979–1997.
13. H. Nopour, M. M. Shokrieh, A. Kabiri Ataabadi, “Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation,” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 4, pp. 405-417, 2018.
14. S. M. R. Koloor, H. Moshrefzadeh-Sani, S. M. Hashemianzadeh, M. M. Shokrieh, “The effective stiffness of an embedded graphene in a polymeric matrix, accepted, Current Applied Physics 18 (2018) 559-566.
15. M. Nikforooz, J. Montesano, M. Golzara, M.M. Shokrieh, “Assessment of the thermo mechanical performance of continuous glass fiber reinforced thermoplastic laminates,” Polymer Testing, 67 (2018) 457-467.
16. A. Zeinedini, M. M. Shokrieh, A. Ebrahimi, “The effect of agglomeration on the fracture toughness of CNTs-reinforced nanocomposites,” Theoretical and Applied Fracture Mechanics, Theoretical and Applied Fracture Mechanics 94 (2018) 84–94.
17. M. M. Shokrieh, R. Ghasemi, R. Mosalmani, “A general micromechanical model to predict elastic and strength properties of balanced plain weave fabric composites” Journal of Composite Materials, Volume: 51 issue 20, pp. 2863-2878, June 2017.
18. Shokrieh M. M. and Memar M., “Characterization of tensile and compressive properties of Basalt/Epoxy composites under stress corrosion conditions,” Mechanics of Composite Materials, Vol. 53, No. 6, pp. 759-766, January, 2018.
19. Z. Daneshjoo, M. M. Shokrieh and M. Fakoor, “A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects,” Theoretical and Applied Fracture Mechanics, 94 (2018) 46–56.
20. Z. Shokrieh, M.M. Shokrieh, Z. Zhao, “A modified micromechanical model to predict the creep modulus of polymeric nanocomposites,” Polymer Testing 65 (2018) 414–419.
21. Nikforooz, M, Golzar, M, Shokrieh, MM, Montesano, J, “Processability and tensile performance of continuous glass fiber/polyamide laminates for structural load-bearing applications,” Composites: Part A 105 (2018) 156–164.
22. Shokrieh M. M., Esmkhani M. and Haghighatkhah A. R., "Flexural fatigue modeling of short fibers/epoxy composites,” Structural Engineering and Mechanics, Vol. 64, No. 3 (2017) 287-292.
23. A. R. Shajari, R. Ghajar, M. M. Shokrieh, "Multiscale modeling of the viscoelastic properties of CNT/polymer nanocomposites, using complex and time-dependent homogenizations", Computational Materials Science 142 (2018) 395–409.
24. A. Parsaee, M. M. Shokrieh, M. Mondali, “A novel model for homogenization of multi-phase composites with high volume fraction of inclusions”, In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 2, pp. 195-204, 2017.
25. M. M. Shokrieh, S. Rezvani, R. Mosalmani, “Mechanical behavior of polyester polymer concrete under low strain rate loading conditions,” Polymer Testing, 63 (2017) 596-604.
26. A. Saeedi, M. M. Shokrieh, “Effect of shape memory alloy wires on the enhancement of fracture behavior of epoxy polymer,” Polymer Testing 64 (2017) 221–228.
27. M. M. Shokrieh, M. Salamat-talab, M. Heidari-Rarani, “Dependency of bridging traction of DCB composite specimen on interface fiber angle,” Theoretical and Applied Fracture Mechanics, 90 (2017) 22–32.
28. Shokrieh, M. M., Damirchiloo, S. and Salamat-talab, M., “Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using the inverse method,” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 1, pp. 83-90, 2017.
29. M. M. Shokrieh and H. Moshrefzadeh Sani, “A novel laminate analogy to calculate the strength of two-dimensional randomly oriented short-fiber composites,” Composites Science and Technology, 147 (2017) 22-29.
30. F. Taheri Behrooz, M. Omidi, M. M. Shokrieh, Experimental and numerical examination of the effect of geometrical imperfection on buckling load in axially compressed Composites cylinder with and without cutout, Modares Mechanical Engineering, Vol. 16, No. 6, pp. 367-377, 2016 (in Persian).
31. J. Mashayekh, S. H. Tabatabaian, M. Amiri, and M. M. Shokrieh, “The impact of external contextual factors on open innovation adoption with emphasis on sector characteristics: evidences from Iran's advanced materials firms,” In Persian, Innovation Management Journal, Vol. 5, No. 2, pp. 1-31, 2016.
32. F. Taheri Behrooz, M. Omidi, M. M. Shokrieh, “Experimental and numerical investigation of buckling behavior of composite cylinders with cutout,” Thin walled Structures, 116 (2017) 136–144.
33. M. M. Shokrieh and A. Nouri, “Post buckling analysis of shallow composite shells based on the third order shear deformation theory,” Aerospace Science and Technology 66 (2017) 332–341.
34. M. M. Shokrieh, A. Zeinedini, S. M. Ghoreishi, “On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated composites,” Composite Structures 171 (2017) 19–31.
35. M. M. Shokrieh, A. R. Shamaei Kashani, R. Mosalmani, “Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites,” In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 3, pp. 291-300, 2016.
36. M. M. Shokrieh, M. Salamat-talab, M. Heidari-Rarani, “Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens,” Theoretical and Applied Fracture Mechanics, 86, pp. 153-160, 2016.
37. Shokrieh M. M., Rezvani S., Mosalmani R. “Mechanical behavior of polyester resin and its polymer concrete under static and dynamic loading conditions,” In Persian, Sharif Journal of Science and Technology, Vol. 32-3, No. 1, pp. 97-105, 2016.
38. M. M. Shokrieh and H. Moshrefzadeh Sani, “On the constant parameters of Halpin-Tsai equation,” Polymer, 106 (2016) 14-20.
39. R. Ghajar, M. M. Shokrieh, A. R. Shajari, ^“Investigation of Agglomeration and Dispersion of Reinforcement on the Viscoelastic Properties of CNT Reinforced Polymeric Composites, In Persian, Amirkabir Journal of Science and Technology, Amirkabir Journal of Mechanical Engineering, 2017, 48(4), pp. 363–370.
40. M. M. Shokrieh and H. Moshrefzadeh Sani, “An optimized representative volume element to predict the stiffness of aligned short fiber composites,” Journal of Composite Materials, 2016, Vol. 50(23) 3301–3310.
41. M. M. Shokrieh, R. Ghasemi, R. Mosalmani, Micromechanics based analytical model for prediction of the elastic properties of woven fabric composites, Modares Mechanical Engineering, Vol. 16, No. 7, pp. 1-11, 2016 (in Persian).
42. Shokrieh, M. M. and Zeinedini, A., “Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites”, In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 1, pp. 1-10, 2016.
43. M. M. Shokrieh, A. R. Shamaei Kashani, R. Mosalmani, “A dynamic constitutive-micromechanical model to predict the strain rate dependent mechanical behavior of carbon nanofiber/epoxy nanocomposites,” Iranian Polymer Journal, 25(6), 487-501, 2016.
44. M. M. Shokrieh and M. A. Kamangar, “Estimation of residual stresses in laminated composites by slitting method utilizing eigen strains,” Journal of engineering materials and technology, Oct. 2016, Vol. 138, 041003-1 - 041003-8.
45. A. Parsaee, M.M. Shokrieh, M. Mondali, “micro–macro homogenization scheme for elastic composites containing high volume fraction multi-shape inclusions,” Computational Materials Science 121 (2016) 217–224.
46. M. M. Shokrieh and Afshin Zeinedini, “Effect of CNTs debonding on mode I fracture toughness of polymeric nanocomposites,” Materials and Design, Volume 101, 5 July 2016, Pages 56–65.
47. M. Torabizadeh and M. M. Shokrieh, “An Experimental and Numerical Study of the Dynamic Response of Composites under Impact at Low Temperatures,” Mechanics of Advanced Materials and Structures, Volume 23, Issue 6, pp. 615-623, 2016.
48. M. M. Shokrieh, I. Zibaei, “Application of Strain Gradient Elasticity in Analysis of Elastic Properties of Single Walled Carbon Nanotubes,” Amirkabir Journal of Science and Technology, (in Persian), Vol. 47, No. 2, Winter 2015, pp. 51-60.
49. M. M. Shokrieh, and H. Shaali “Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 4, pp. 1-12, 2016.
50. H. Rahnama and M. M. Shokrieh, “Exact micromechanical stress analysis of long fiber composites under uniform tensile loading,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 3, pp. 1-10, 2015.
51. M. M. Shokrieh, R. Ghajar, A. R. Shajari, ^“The effect of time-dependent slightly weaken interface on the viscoelastic properties of CNT/polymer nanocomposites,” Composite Structures, Volume 146, 20 June 2016, Pages 122–131.
52. R. Ghajar, M. M. Shokrieh, A. R. Shajari, “Transient thermo-visco-elastic response of a functionally graded nonaxisymmetric cylinder,” Journal of Computational Applied Mechanics, Vol. 46, No. 2, July 2015, pp 191- 204.
53. M. M. Shokrieh, Z. Daneshjoo, M. Fakoor, “A modified model for simulation of mode I delamination growth in laminated composite materials,” Theoretical and Applied Fracture Mechanics, 82 (2016) 107–116.
54. M. M. Shokrieh, A. Daneshvar, “Reduction in deformation of unsymmetrical cross-ply laminated composite using carbon nanofibers,” Sharif Journal of Science and Technology, in Persian, Vol. 31-3, No. 2, pp. 89-95, 2015.
55. M. M. Shokrieh, Z. Shokrieh, M. Davarpanah, “Design, Analysis, Manufacturing and Testing of Composite Folded Plates,” Journal of Modeling in Engineering, Semnan University, In Persian, Year 13, No. 42, pp. 1-15, 2015.
56. M.M. Shokrieh, F. Taheri-Behrooz , H. Haftchenari, M. Mozafari, “Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact,” Journal of Mechanics of Advanced Composite Structures, Vol. 1, No. 2, pp. 81-85, 2014.
57. Shokrieh M. M., Esmkhani M. and Haghighatkhah A. R., "Mechanical Properties of Graphene Nanoplatelet/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings,” Journal of Mechanics of Advanced Composite Structures, Vol. 1, No. 1, pp. 1-7, 2014.
58. Mahmood M. Shokrieh and Afshin Zeinedini, “Modeling of delamination fracture toughness of I and II mixed mode of a laminated composite asymmetric double cantilever beam,” Journal of Modeling in Engineering, Semnan University, In Persian, Vol. 13, No. 31, pp. 1- 11, 2014.
59. Shokrieh M. M., Esmkhani M. and Taheri-Behrooz F. "A Novel Model to Predict the Fatigue Life of Thermoplastic Nanocomposites", Journal of Thermoplastic Composite Materials, November 2015, 28 1496-1506.
60. M. M. Shokrieh, M. Ghajar, M. Salamat-talab, R. Madoliat, “Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 2, pp. 1-8, 2015.
61. Shokrieh M. M., Rezvani S., Mosalmani R. “A novel polymer concrete made of fine-silica sand/polyester”, Mechanics of Composite Materials, Vol. 51, No. 5, pp. 571-580, November, 2015.
62. M. M. Shokrieh, I. Zibaei, “Determination of the appropriate gradient elasticity theory for bending analysis of nano-beams by considering boundary conditions effect,” Latin American Journal of Solids and Structures, 12 (2015) 2208-2230.
63. M. M. Shokrieh, A. Zeinedini, S. M. Ghoreishi, “Effects of adding multiwall carbon nanotubes on mechanical properties of Epoxy resin and Glass/Epoxy laminated composites,” Modares Mechanical Engineering, in Persian, Vol. 15, No.9, pp.125-133, 2015.
64. M. M. Shokrieh, M. Danesh and M. Esmkhani, “A combined micromechanical-energy method to predict the fatigue life of nanoparticles/chopped strand mat/polymer hybrid nanocomposites,” Composite Structures 133 (2015) 886–891.
65. M.M. Shokrieh, Z. Daneshjoo, M. Fakoor, “Simulation of initiation and propagation of mode I delamination in laminated composites considering fracture process zone effects,” Sharif Journal of Science and Technology, in Persian, Vol. 31-3, No. 1, pp. 73-82, 2015.
66. H. Ahmadi, G.H. Liaghat, M.M. Shokrieh, H. Hadavinia, A. Ordys, A. Aboutorabi “Quasi-static and Dynamic Compressive Properties of Ceramic Microballoon filled Syntactic Foam,” Journal of Composite Materials 2015, Vol. 49(10) 1255–1266.
67. M. M. Shokrieh, V. A. Joneidi, "Characterization and simulation of impact behavior of graphene/polypropylene nanocomposites using a novel strain-rate dependent micromechanics model," Journal of Composite Materials, 2015, Vol. 49(19) 2317–2328.
68. M. M. Shokrieh, V. A. Joneidi, R. Mosalmani, “Characterization and simulation of tensile behavior of graphene/polypropylene nanocomposites using a novel strain-rate dependent micromechanics model,” Journal of Thermoplastic Composites, 2015, Vol. 28(6) 818–834.
69. M. M. Shokrieh, A. Mahmoudi and H. R. Shadkam, “Hybrid polyvinyl alcohol and cellulose fiber pulp instead of asbestos fibers in cement based composites, a laboratory investigation,” Mechanics of Composite Materials, Vol. 51, No. 2, May, 2015 (Russian Original Vol. 51, No. 2, March-April, 2015).
70. M. M. Shokrieh, S. Rezvani, R. Mosalmani, “Manufacturing and Characterization of a Polymer Concrete and Estimation of Compressive Strength Using a Two-Phase Micromechanical Model,” Iranian Journal of Polymer Science and Technology, in Persian, Vol. 28, No. 2, 119-128, June-July, 2015.
71. M. M. Shokrieh, H. Jarrah, M. Heidari-Rarani, “Effect of stacking sequence on mode II strain energy release rate of composite ENF specimens,” Journal of Computational Methods in Engineering, In Persian, Vol. 33, No. 2, 2014.
72. M. M. Shokrieh, A. R. Shamaei Kashani, R. Mosalmani, “A dynamic-micromechanical constitutive model to predict the strain rate dependent shear behavior of neat and reinforced polymers with carbon nanofibers, Modares Mechanical Engineering, Vol. 15, No. 7, pp. 13-21, 2015 (In Persian).
73. H. Nosraty, M. Tehrani-Dehkordi, M. M. Shokrieh, G. Minak, “Intraply Hybrid Composites Based on Basalt and Nylon Woven Fabrics: Tensile and Compressive Properties,” Iranian Journal of Materials science and Engineering, Vol. 12, No. 1, March 2015.
74. Lesani, M., Bahaari, M. R., Shokrieh, M. M., “FRP wrapping for the rehabilitation of circular hollow section (CHS) tubular steel connections Thin-Walled Structures,” Journal of thin walled structures, Volume 90, May 2015, Pages 216–234.
75. Shokrieh M. M., Esmkhani M., “Experimental investigation on fatigue behavior of epoxy resin under load and displacement controls,” Iranian Journal of Polymer Science and Technology, in Persian, Vol. 27, No. 5, 373-382, December 2014-January 2015.
76. Mahmood M. Shokrieh, Reza Mosalmani, Ali Reza Shamaei, “A combined micromechanical-numerical model to simulate shear behavior of carbon nanofiber/epoxy nanocomposites,” Material and Design, Volume 67, 15 February 2015, Pages 531–537.
77. M. M. Shokrieh, R. Madoliat, B. Bostani, A. Ghasemi Ghalebahmani, V. Mahmoodian, “A new inverse method for determination of unidirectional ply mechanical properties of a laminated composite,” In Persian, Modares Mechanical Engineering, Vol. 15, No. 1, pp. 352-360, 2015.
78. Shokrieh, M. M., and Mosalmani R., and Majid Jamal Omidi, “A strain-rate dependent micromechanical constitutive model for glass/epoxy composites,” Composite Structures, 121 (2015) 37–45.
79. Taheri-Behrooz F., Memar Maher B. and Shokrieh M.M., “Mechanical properties modification of a thin film phenolic resin filled with nano silica particles,” Computational Material Science, Volume 96, Part B, January 2015, Pages 411–415.
80. F. Vahedi, H. R. Shahverdi, M. M. Shokrieh and M. Esmkhani, “Effects of Carbon Nanotubes on Mechanical and Electrical Properties of Epoxy Resin,” New Carbon Materials, 2014 Vol. 29 (6): 419-425.
81. Shokrieh, M. M., and Mosalmani R., and Majid Jamal Omidi “Strain rate dependent micromechanical modeling of reinforced polymers with carbon nanotubes,” Journal of Composite Materials, November 2014; vol. 48, 27: pp. 3381-3393.
82. Heidari-Rarani M, Aliha M.R.M., Shokrieh M.M., Ayatollahi M.R., “Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings- An experimental study,” Construction & Building Materials, Volume 64, pp. 308–315, 14 August 2014.
83. H. Ahmadi, GH. Liaghat, M.M. Shokrieh, A. Aboutorabi, H. Havavinia, A. Ordys, “Compressive Properties of Nanoclay Reinforced Syntactic Foams at Quasi-Static and High Strain Rate Loading,” Polymer-Plastics Technology and Engineering, 53: 990–999, 2014.
84. M. M. Shokrieh, S. M. Ghoreishi, M. Esmkhani and Z. Zhao, "Effects of graphene nanoplatelets and graphene nanosheets on fracture toughness of epoxy nanocomposites", Fatigue & Fracture of Engineering Materials & Structures, Volume 37, Issue 10, pages 1116-1123, October 2014.
85. H. Ahmadi, Gh. Liaghat, M. M. Shokrieh, “Volume fraction and microballoon size effects on the compressive properties of epoxy/ceramic microballoon syntactic foam,” Modares Mechanical Engineering, Vol. 14, No. 4, pp. 37-44, in Persian, 2014.
86. H. Ahmadi, Gh. Liaghat, M. M. Shokrieh, “Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams,” Modares Mechanical Engineering, Vol. 14, No. 2, pp. 47-54, in Persian, 2014.
87. M. M. Shokrieh, S. Soveiti, R. Mosalmani, “An investigation on effects of aspect ratio of representative volume element on elastic modulus of a carbon nanotubes reinforced polymer,” Modares Mechanical Engineering, in Persian, Vol. 14, No. 9, pp. 107-116, 2014.
88. M. M. Shokrieh, M. Esmkhani, F. Taheri-Behrooz and A. R. Haqiqatkhah, "Displacement Controlled Flexural Bending Fatigue Behavior of Graphene/Epoxy Nanocomposites" Journal of Composite Materials, 2014, Vol. 48(24) 2935–2944.
89. M. M. Shokrieh, Z. Shokrieh, S. M. Hashemianzadeh, “A novel combined molecular dynamics-micromechanics method for modeling of stiffness of graphene/epoxy nanocomposites with randomly distributed graphene”, Materials and Design, Volume 64, December 2014, Pages 96–101.
90. Mahmood M. Shokrieh and Afshin Zeinedini, “A Novel Method for Calculation of Strain Energy Release Rate of Asymmetric Double Cantilever Laminated Composite Beams,” Applied Composite Materials, (2014) 21:399–415.
91. M. M. Shokrieh, M. Esmkhani, Z. Shokrieh and Z. Zhao, “Stiffness prediction of graphene nanoplatelet/epoxy nanocomposites by a combined molecular dynamics-micromechanics method,” Computational Material Science, Volume 92, September 2014, Pages 444–450.
92. Shokrieh M. M., Karamnejad A. “Investigation of Strain Rate Effects on the Dynamic Response of a Glass/Epoxy Composite Plate Under Blast Loading by Using the Finite-Difference Method,” Mechanics of Composite Materials, Vol. 50, No. 3, pp. 295-310, July 2014 (Russian Original Vol. 50, No. 3, May-June, 2014).
93. M. M. Shokrieh, M. Esmkhani, A. R. Haghighatkhah and Z. Zhao, “Flexural Fatigue Behavior of Synthesized Graphene/Carbon-Nanofiber/Epoxy Hybrid Nanocomposites,” Materials and Design, Volume 62, October 2014, Pages 401–408.
94. Mahmood M. Shokrieh and Afshin Zeinedini, “A Novel procedure for Prediction of Mixed Mode I/II of Fracture Toughness of Laminate Composites,” Iranian Journal of Polymer Science and Technology, in Persian, Vol. 27, No. 2, 111-120, 2014.
95. Mahmood M. Shokrieh and Reza Mosalmani, “Modeling of SMC compression molding under non-isothermal conditions,” Journal of Reinforced Plastics and Composites, 2014, Vol. 33(13) 1183–1198.
96. M. Heidari-Rarani, S. Khalkhali Sharifi and M.M. Shokrieh, “Effect of ply stacking sequence on buckling behavior of E-glass/epoxy laminated composites,” Computational Materials Science, Volume 89, 15 June 2014, Pages 89–96.
97. I. Zibaei, H. Rahnama, F. Taheri-Behrooz and M. M. Shokrieh, “First Strain Gradient Elasticity Solution for Nanotube-Reinforced Matrix Problem”, Composite Structures, Volume 112, June 2014, Pages 273–282, 2014.
98. M. M. Shokrieh, M. Esmkhani and A. R. Haqiqatkhah, "Flexural Fatigue Behavior of CNF/Epoxy Nanocomposites", Fatigue and Fracture of Engineering Materials & Structures, 2014, 37, 553–560.
99. M. M. Shokrieh, M. Esmkhani and F. Taheri-Behrooz, “Fatigue modeling of chopped strand mat/epoxy composites,” Structural Engineering and Mechanics, Vol. 50, No. 2 (2014) 231-240.
100. M. M. Shokrieh, M. Fakoor, Z. Daneshjoo, “Design and Analysis of Sandwich Panels as Main Structure for Mounting the Solar Cells of a Communication Satellite,” journal of space science and technology (JSST), Vol. 6, No.4, pp. 13-22, 2014.
101. M. M. Shokrieh and S. Akbari R., "Isolation of residual shear stresses effects in slitting measurement of residual normal stresses in laminated composites", Journal of Composite Materials, Volume 48 Issue 7, March 2014.
102. Taheri, F., Ghasemi A. R., Shokrieh, M. M., “Determination of Non-uniform Residual Stresses in Laminated Composites Using Integral Hole Drilling Method, Experimental Evaluation,” Journal of Composite Materials, Vol. 48(4) 415–425, 2013.
103. M. M. Shokrieh, A. Zeinedini, “Prediction of Strain Energy Release Rate of Asymmetric Double Cantilever Composite Beam in Mixed-mode I/II Delamination using Equivalent Lay-up,” Modares Mechanical Engineering, in Persian, Vol. 13, No. 13, pp. 214-225, 2014.
104. Shokrieh, M. M., and Mosalmani R., and Majid Jamal Omidi "Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites,” Composite Structures 111 (2014) 232–239.
105. Akbari, S. Taheri, F., and Shokrieh, M. M., Characterization of Residual Stresses in a Thin-Walled Filament Wound Carbon/Epoxy Ring Using Incremental Hole Drilling Method, Composites Science and Technology, Volume 94, 9 April 2014, Pages 8–15.
106. F. Taheri- Behrooz, I. Yahyapour, M.M Shokrieh “Effect of Stacking Sequence on Failure Mode of Fiber Metal Laminates under Low Velocity Impact,” Iranian Polymer Journal, February 2014, Volume 23, Issue 2, pp 147-152, 2014.
107. S. Akbari, F. Taheri Behrooz, and M. M. Shokrieh, "Slitting Measurement of Residual Hoop Stresses Through the Wall-Thickness of a Filament Wound Composite Ring,” Experimental Mechanics, November 2013, Volume 53, Issue 9, pp 1509-1518.
108. Lesani, M., Bahaari, M. R., Shokrieh, M. M., “Experimental Investigation of FRP-Strengthened Tubular T-Joints under Axial Compressive Loads Construction & Building Materials,” Construction and Building Materials 53 (2014) 243–252.
109. M. M. Shokrieh, Z. Shokrieh, S. M. Hashemianzadeh, “Modeling of Stiffness of Graphene/Epoxy Nanocomposites with Randomly Distributed Graphene using a Combined Molecular Dynamics-Micromechanics method,” Modares Mechanical Engineering, in Persian, Vol. 13, No. 11, pp. 25-35, 2014.
110. M. M. Shokrieh and V. Ahmadi Joneidi, “Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites,” Modares Mechanical Engineering, in Persian, Vol. 13, No. 11, pp. 55-63, 2014.
111. M. M. Shokrieh, A. Saeedi, M. Chitsazzadeh, “Evaluating the effects of multi-walled carbon nanotubes on the mechanical properties of chopped strand mat/polyester composites,” Materials and Design, Vol. 56, April 2014, Pages 274–279.
112. Shokrieh M.M., Salamat-Talab M., Heidari-Rarani M., "Effect of initial crack length on the measured bridging law of unidirectional E-glass/epoxy double cantilever beam specimens" Materials and Design, Vol. 55, March 2014, Pages 605–611.
113. M. M. Shokrieh, A. Daneshvar, and S. Akbari R., “Reduction of Thermal Residual Stresses of Laminated Polymer Composites by Addition of Carbon Nanotubes,” Materials and Design, 53 (2014) 209–216.
114. M. Heidari-Rarani, M. M. Shokrieh, “Effect of curved crack front on interlaminar fracture toughness of composite DCB specimens,” Sharif Journal of Science and Technology, In Persian, Volume 29, Issue 2, Page 81-86, 2013.
115. M. M. Shokrieh, A. Daneshvar, and Chitsazzadeh, M., “A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube,” Journal of Ultrafine Grained and Nanostructured Materials, Vol. 46, No. 2, 2013, pp. 61-66.
116. F. Taheri, M. M. Shokrieh, H. R. Abdolvand, “Designing and manufacturing of a drop weight impact test machine,” Engineering Solid Mechanics, Vol. 1, No. 2, (2013), 69-76.
117. Shokrieh, M. M. Mazloomi M. S., " An Analytical Investigation on the Stiffness of 3-Dimensional Four-directional Braided Composites by Multi-unit Cell Model," In Persian, Sharif Journal of Science and Technology, Vol. 29-3, No. 1, pp. 11-21, 2013.
118. Shokrieh, M. M., Askari, A., "Similitude study of impacted composite laminates under buckling loading", Journal of Engineering Mechanics, Oct 2013, Vol. 139, No. 10, pp. 1334-1340.
119. M. Tehrani Dehkordi, H. Nosraty, M. M. Shokrieh, “Analytical Investigation on the Tensile Behavior of Hybrid Plain-woven Fabrics,” Journal of Textile Science and Technology, Vol. 2, No.2, 115-122, Summer 2012.
120. M. Tehrani Dehkordi, H. Nosraty, M. M. Shokrieh, “Low Velocity Impact Simulation of Intraply Hybrid Composites Reinforced with Brittle and Ductile Fibers,” in Persian, Esteghlal Journal, Computational Methods in Engineering, 32, No. 1, pp. 115-124, 2013.
121. M. M. Shokrieh, M. Esmkhani, F. Vahedi, H. R. Shahverdi, “Improvement of Mechanical and Electrical Properties of Epoxy Resin with Carbon Nanofibers,” Iranian Polymer Journal, (2013) 22:721–72.
122. M. M. Shokrieh, A. Saeedi, M. Chitsazzadeh, “Effects of Multi-walled Carbon Nanotubes on the Mechanical Properties of Glass/Polyester Composites,” Journal Ultrafine Grained and Nanostructures Materials, Vol. 45, No. 1, 2012, pp. 19-22.
123. M. M. Shokrieh and M. Esmkhani, “Effect of graphene nano sheets (GNS) and graphite nano platelets (GNP) on mechanical properties of epoxy nanocomposites,” Science of Advanced Materials, Volume 5, Number 3, March 2013 , pp. 260-266 (7).
124. M. M. Shokrieh, A. Saeedi, “Mechanical Properties of Multi-Walled Carbon Nanotube/Polyester Nanocomposites,” Journal of Nanostructure in Chemistry, 2013, 3:20 doi:10.1186/2193-8865-3-20.
125. M. M. Shokrieh A. Daneshvar, S. Akbari R., and Chitsazzadeh, M., "The use of carbon nanofibers for thermal residual stress reduction in carbon fiber/epoxy laminated composites,” CARBON, 59 (2013) 255–263.
126. M. M. Shokrieh, A. Parsaee, “Measuring the Optimum Fiber Content Ratio of E-Glass/Epoxy Composite through Microbuckling,” Advanced Materials Research, Vol. 548 (2012), pp. 7-11.
127. M. M. Shokrieh, M. Elahi, “A new model to estimate the Young's modulus of polymer concrete using micromechanical relations,” Modares Mechanical Engineering, in Persian, pp. Vol. 12, No. 2, 153-162, 2012.
128. M. M. Shokrieh, Z. Shokrieh, S. M. Hashemianzadeh, “Effective parameters in modeling of graphene sheet Young’s modulus,” Modares Mechanical Engineering, in Persian, Vol. 12, No. 3, pp. 147-155, 2012.
129. Zakeri, M. Shayanmehr, and M.M. Shokrieh, “Interface modeling of nanotube reinforced nanocomposites by using multi-scale modeling method,” Modares Mechanical Engineering, in Persian, Vol. 12, No. 5, pp. 1-12, 2012.
130. M. M. Shokrieh, S. Akbari R., “Extension of Sitting Method for Simultaneous Measurement of Residual Normal and Out-of-plane Shear Stresses in Polymer Composites,” Iranian Journal of Polymer Science and Technology, in Persian, Vol. 25, No. 4, 301-313, Oct. – Nov. 2012.
131. M. M. Shokrieh, V. Nasir, “An Estimation of Longitudinal Strength Reduction of Unidirectional E-glass/Epoxy Composites Exposed to Sulfuric Acid using a Micromechanics Model,” Iranian Journal of Polymer Science and Technology, in Persian, Vol. 25, No. 2, 91-101, June - July 2012.
132. Ahmadi, M., Moghbeli, M. R., Shokrieh, M. M., “Shrinkage and mechanical properties of unsaturated polyester reinforced with clay and core–shell rubber,” Iranian Polymer J, Dec. 2012, Volume 21, Issue 12, pp. 855-868.
133. Ahmadi, M., Moghbeli, M. R., Shokrieh, M. M., “Unsaturated polyester-based hybrid nanocomposite: fracture behavior and tensile properties,” J Polymer Research, Volume 19, Number 9 (2012), 9971.
134. Lesani, M., Bahaari, M.R., Shokrieh, M.M., “Numerical Investigation of FRP-Strengthened Steel Tubular T-Joints under Axial Compressive Loads’ Composite Structures 100 (2013) 71–78.
135. M. M. Shokrieh, S. Akbari R., “Application of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites,” Journal of Mechanical Research and Application, JMRA, Vol. 4, No. 1, 2012, 9-15.
136. Shokrieh M.M., Salamat-Talab M., Heidari-Rarani M., “Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models,” Modares Mechanical Engineering, in Persian, Vol. 13, No. 1, pp. 38-48, 2013.
137. Shokrieh, M. M., Esmkhani, M., “Fatigue life prediction of nanoparticle/fibrous polymeric composites based on the micromechanical and normalized stiffness degradation approaches,” J. Material Science, February 2013, Volume 48, Issue 3, pp 1027-1034.
138. Lesani, M., Bahaari, M.R., Shokrieh, M.M., “Detail investigation on un-stiffened T/Y tubular joints behavior under axial compressive loads,” Journal of Constructional Steel Research, Volume 80, January 2013, Pages 91-99.
139. Tehrani Dehkordi, M., Nosraty, H., Shokrieh, M.M., Minak, G., Ghelli, D., “The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites,” Materials and Design, Volume 43, 2013, Pages 283-290.
140. Heidari-Rarani, M., Shokrieh, M.M., Camanho, P.P., “Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects,” Composites B: Volume 45, Issue 1, February 2013, Pages 897-903.
141. M. M. Shokrieh, V. Nasir, “A study on the strength behavior and crack formation mechanism in E-glass fiber under corrosion conditions,” Sharif Journal of Science and Technology, in Persian, Vol. 38 -3 No. 1, pp. 101-107, 2012.
142. S. Shadlou, M. R. Ayatollahi and M. M. Shokrieh, “Fracture behavior of epoxy/DWNT nanocomposites using molecular dynamics simulation,” in Persian, Iranian Journal of Polymer Science and Technology, Vol. 25, No. 4, 315-322, October - November 2012.
143. M. M. Shokrieh, S. Akbari R., “Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites,” International Journal of Advanced Design and Manufacturing Technology, Vol. 5, No. 4, pp. 13-18, Aug. 2012.
144. M.M. Shokrieh, S. Akbari, A. Daneshvar, “A comparison between the slitting method and the classical lamination theory in determination of macro-residual stresses in laminated composites,” Composite Structures 96 (2013) 708–715.
145. M.M. Shokrieh, A. Daneshvar, “A Novel Method to Decrease Macro-Residual Stresses of Laminated Composites by Adding Carbon Nano-Fibers,” In Persian, Modares Mechanical Engineering, Vol. 12, No. 4, pp. 147-155, 2012.
146. Shokrieh, M. M., Hosseinkhani, M. R., Naimi-Jamal, M. R., and Tourani, H., “Nanoindentation and nanoscratch investigations on Graphene-based nanocomposites,” Polymer Testing 32 (2013) 45–51.
147. Aliha M.R.M., Heidari-Rarani M., Shokrieh M.M., Ayatollahi M.R., “Experimental determination of tensile strength and K_Ic of polymer concretes using semi-circular bend (SCB) specimens,” Structural Engineering and Mechanics, Vol. 43, No. 6 (2012) 823-833.
148. Ahmadi, M., Moghbeli, M. R., Shokrieh, M. M., “Rubber modification of unsaturated polyester resin with core-shell rubber particles: Effect of shell composition” polymer engineering and science, Volume 52, Issue 9, pages 1928–1937, September 2012.
149. V. Nasir, H. Karimipour, F. Taheri-Behrooz, M.M. Shokrieh, “Corrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid,” Corrosion Science 64 (2012) 1–7.
150. M. M. Shokrieh, M. A. Torabizadeh, A. Fereidoon “Progressive Failure Analysis of Glass/Epoxy Composites at Low Temperature” Strength of Materials, Vol. 44, No. 3, May, pp. 314-324, 2012.
151. M. M. Shokrieh, H. Rajabpour-Shirazi, M. Heidari-Rarani, M. Haghpanahi, “Simulation of mode I delamination propagation in multidirectional composites with R-curve effects using VCCT method,” Computational Material Science, 65 (2012) 66–73.
152. M. M. Shokrieh and S. Akbari R., “Investigation of Important Parameters in Residual Stress Determination in Isotropic plates and Laminated Composites by Slitting Method,” in Persian, Journal of Solid Mechanics in Engineering (JSME), Islamic Azad Univ., Khomeinishahr Branch, Vol. 4, No. 1, pp. 35-45, 2011.
153. M. M. Shokrieh, M. A. Torabizadeh, A. Fereidoon “Dynamic failure behavior of glass/epoxy composites under low temperature using Charpy impact test method,” Indian Journal of Engineering & Materials Sciences, Vol. 18, pp. 211-220, June 2011.
154. Shokrieh, M. M., Safarabadi, M. Ghaanee, A. R., “A New Three-Dimensional Analytical Model to Simulate Micro-Residual Stresses in Polymer Matrix Composites,” Mechanics of Composite Materials, Vol. 48, No. 3, 273-284, July, 2012.
155. Shokrieh, M. M., Rafiee, R., “Development of a Full Range Multi-scale Modeling to Obtain Elastic Properties of CNT/Polymer,” Iranian Polymer Journal, 21:397–402, 2012.
156. Shokrieh, M. M., Kefayati A. R., Chitsazzadeh M., “Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete,” Materials and Design 40 (2012) 443–452.
157. Shokrieh, M. M., Nasir, V. and Karimipour, H., “Strength Behavior and Crack Formation Mechanisms of E-Glass Fiber Exposed to Sulfuric Acid Environment,” Journal of Composite Materials, April 2012 vol. 46 no. 7 765-772, 2012.
158. Shokrieh, M. M., and Mohammad Heidari Rarani, Ayatollahi M. R., “Delamination R-curve as a material property of unidirectional glass/epoxy composites,” Materials and Design, Volume 34, February 2012, Pages 211-218.
159. Shokrieh, M. M., Heidari, R. M., Rahimi, S., “Numerical Determination of delamination Onset in Laminated Symmetric DCB Specimen,” Journal of Solid Mechanics in Engineering, In Persian, Vol. 2, No. 2, pp. 47-56, 2009.
160. Shokrieh, M. M. and Akbari R., S., “Simulation of slitting method for calculation of compliance functions of laminated composites,” Journal of Composite Materials, Volume 46 No. 9, pp. 1101-1109, May 2012.
161. Shokrieh, M. M. and Akbari R., S., “Effect of Residual Shear Stresses on Released Strains in Laminated Composites Measured by Slitting Method” Journal of Engineering Materials and Technology, Vol. 134, pp. 011006-1 to 011006-9, 2011.
162. Shokrieh, M. M. Torabizadeh, M. A, and Fereidoon, A. “A new method for evaluation of mechanical properties of glass/epoxy composites at low temperatures" Strength of Materials, Vol. 44, No. 1, pp.87 – 99, January, 2012.
163. Shokrieh, M. M., and Safarabadi, M., “Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites,” in Persian, Iranian Journal of Polymer Science and Technology, Vol. 24, No. 5, 355-368, December 2011 - January 2012.
164. Shokrieh, M. M., and Safarabadi, M., “Three-Dimensional Analysis of Micro-Residual Stresses in Fibrous Composites Based on the Energy Method: A Study Including Interphase Effects,” Journal of Composite Materials, 46(6) 727–735, 2012.
165. M. Tehrani Dehkordi, H. Nosraty, M. M. Shokrieh, “A Study on the Effect of Basalt and Nylon Yarns Hybridization on the Tensile Properties of their Weaved Fabrics,” In Persian, Journal of Textile Science and Technology, Vol. 1, No.2, 2012.
166. Shokrieh M. M., Heidari-Rarani M., Rahimi S., “Influence of curved delamination front on toughness of multidirectional DCB specimens,” Composite Structures, 94 (2012) 1359–1365.
167. M. M. Shokrieh, S. M. Mahdavi, “Micromechanical Model to Evaluate the Effects of Dimensions and Interphase Region on the Elastic Modulus of CNT/Polymer Composites,” Modares Mechanical Engineering, in Persian, Vol. 11, No. 3, pp. 13-25, 2011.
168. Shokrieh, M. M., and Mazloomi, M. S., “A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites,” Composite Structures, Volume 94, Issue 3, February 2012, pp. 1005-1015.
169. Behzad Babaei, Mahmood M. Shokrieh, Kamran Daneshjou, “The ballistic resistance of multi-layered targets impacted by rigid projectiles,” Materials Science and Engineering A, 530 (2011) 208–217.
170. Mahmood M. Shokrieh, and M. Fakhar N., “Experimental, Analytical and Numerical Studies of Composite Sandwich Panels under Low Velocity Impact Loadings," Mechanics of Composite Materials, Vol. 47, No. 6, December, 2011.
171. M. M. Shokrieh, A. M. Aghdami, “A dynamic transient model to simulate the time dependent pultrusion process of glass/polyester composites,” Applied Composite Materials (2011) 18:585–601.
172. Shokrieh, M. M., and Majid J. Omidi, "A Review on Impact Resistance of Fiber Reinforced Polymer Composites," Iranian Journal of Polymers Science and Technology, In Persian, Vol. 24, No. 4, 255-277, October-November 2011.
173. M. M. Shokrieh and M. Safarabadi "Effect of fiber transverse isotropy on micro-residual stresses in polymeric composites,” Journal of Strain Analysis for Engineering Design, Vol. 46, pp. 817-824, 2011.
174. M. M. Shokrieh, V. Nasir and H. Karimipour, “A micromechanical study of longitudinal strength of unidirectional E-glass/epoxy composites exposed to sulfuric acid environment,” Journal of Materials and Design, 35 (2012) 394–403.
175. Ayatollahi, M. R., Shokrieh, M. M., Shadlou, S., Kefayati, A. R., Chitsazzadeh, M., “Mechanical and Electrical Properties of Epoxy/Multi-walled Carbon Nanotube/Nanoclay Nanocomposites,” Iranian Polymer Journal, 20 (10), 2011, 835-843.
176. Shokrieh, M. M., and Mohammad Heidari Rarani, Ayatollahi M. R., “Interlaminar fracture toughness of unidirectional DCB specimens: a novel theoretical approach,” Polymer Testing, 31 (2012) 68–75.
177. M. M. Shokrieh, M. Heidari Rarani, "Effect of stacking sequence on delamination toughness of glass/epoxy DCB laminates with 0^o//0^o crack interface", Materials Science & Engineering A, 529 (2011) 265– 269.
178. Shokrieh, M. M., and Mazloomi, M. S., “A Theoretical Method for Calculating the Stiffness of Three-Axial, Two Dimensional Braided Composites,” In Persian, Sharif Journal of Science and Technology, Vol. 27-3, No. 1, pp. 75-81, 2011.
179. Shokrieh, M. M., and Mohammad Heidari Rarani, Ayatollahi M. R., “Calculation of G_I for a multidirectional composite double cantilever beam on two-parametric elastic foundation,” Aerospace Science and Technology, 15 (2011) 534–543.
180. Shokrieh M. M. and Abdolvand, H., "Three-dimensional modeling and experimental validation of heat transfer in polymer matrix composites exposed to fire,” Journal of Composite Materials, 45 (19) 1953-1965, 2011.
181. Ayatollahi M.R., Shadlou S., Shokrieh M. M., “Fracture toughness of epoxy/multi-walled carbon nanotube nano-composites under bending and shear loading conditions,” Materials and Design, 32 (2011) 2115–2124.
182. Ayatollahi M. R., Shadlou S., Shokrieh M. M., “Mixed mode brittle fracture in epoxy/multi-walled carbon nanotube nanocomposites,” Engineering Fracture Mechanics, 78, 2011, 2620-2632.
183. Shokrieh, M. M., and Askari, A., “Consecutive Structural Similitude for Composite Plates under Buckling after Impact,” Journal of Ferdowsi Mashhad University, In Persian, Vol. 22, No. 1, pp. 1-16, 2011.
184. M. M. Shokrieh, and M. Safarabadi " Effects of imperfect adhesion on thermal micro-residual stress of polymer matrix composites,” J Adhesion & Adhesives, 31(2011) 490-497.
185. Ayatollahi M. R., Shadlou S., Shokrieh M. M., “Correlation between aspect ratio of MWCNTs and mixed mode fracture of epoxy based nanocomposites,” Materials Science & Engineering A 528, (2011) 6173-6178.
186. Ayatollahi M. R., Shadlou S., Shokrieh M. M., M. Chitsazzadeh, “Effect of multi-walled carbon nanotube aspect ratio on mechanical and electrical properties of epoxy-based nanocomposites,” Polymer Testing, 30, 548-556 2011.
187. Ayatollahi M. R., Shadlou S., Shokrieh M. M., “Multiscale modeling for mechanical properties of carbon nanotube reinforced nanocomposites subjected to different types of loading,” Composite Structures, 93 (2011) 2250–2259.
188. Chitsazzadeh, M., Shahverdi, H. and Shokrieh, M. M., “Fabrication of Multi-Walled Carbon Nanotube/Vinyl Ester Nanocomposites: Dispersion and Stabilization,” Journal of Defect and Diffusion Forum Vols. 312-315, pp 460-465, 2011.
189. Shokrieh, M. M., Heidari Rarani, M., Shakouri M. and Kashizadeh, “Effects of Thermal Cycles on Mechanical Properties of an Optimized Polymer Concrete," Construction & Building Materials, 25, pp. 3540-3549, 2011.
190. M. M. Shokrieh, M. A. Torabizadeh, A. Fereidoon “Progressive damage modeling of Glass/Epoxy laminated composites under static load at low temperature” Journal of Modeling in Engineering, in Persian, Vol.8, No.21, pp. 33-43, Summer 2010.
191. Shokrieh, M. M., and Niakan, S., “Calculation of Elastic Modulus of CNT/Epoxy Composites, using Averaging Method,” In Persian, Majlesi Journal of Mechanical Engineering, Vol. 4, No.1, pp. 1-9, 2010.
192. Shokrieh, M. M., Asadi, A., “Determination of maximum negative Poisson’s ratio for laminated fiber composites,” Phys. Status Solidi B, 248, No. 5, 1237–1241 (2011).
193. Shokrieh, M. M., and Mosalmani R., "Friction Forces between Sheet Molding Compound Charge and Mold Cavity Surface in Compression Molding,” Key Engineering Materials, Vol. 471-472, (2011), PP. 733-738.
194. Mahmood M. Shokrieh, Ashkan M. Aghdami, “Simulation of Pultrusion Manufacturing Process of Glass/Polyester Composites,” Iranian Journal of Polymers Science and Technology, in Persian, Vol. 23, No. 4, 323-333, 2010.
195. Shokrieh, M. M., and Mohammad Heidari Rarani, "A Comparative study for beams on elastic foundation models to analysis of Mode I delamination in DCB specimen,” Structural Engineering and Mechanics, Vol. 37, No. 2 (2011) 149-162.
196. Shokrieh, M. M., Ghajar, M., “Simulation of mode I strain energy release rate for laminated composite using a simple finite element model,” in Persian, Majlesi Journal, Vol. 3, No.4, 2010, pp. 1-8.
197. Shokrieh M. M. and Roham Rafiee, "Stochastic Multi-Scale Modeling of CNT/Polymer Composites," Computational Materials Science, 50 (2010) 437-446.
198. Shokrieh M. M., Jamal Omidi, M., “Investigating the transverse behavior of glass-epoxy composites under intermediate strain rates” Composite Structures, 93, (2011), pp. 690-696.
199. M. M. Shokrieh, M. J. Omidi, “Progressive Dynamic Damage Modeling of Fiber-Reinforced Composite Structures under Different Loading Rates,” Journal of Composite Materials, November 2010, Vol. 44 no. 23 2723-2745.
200. Daneshjoo, K., Shokrieh, M. M., Ghorbani Moghaddam, M. and Telebitooti, R., “Analytical Model of Sound Transmission through Relatively Tick FGM Cylindrical Shells Considering Third Order Shear Deformation Theory,” Composite Structures, 93 (2010) 67-78.
201. Shokrieh, M. M., and Pooneh Haj Mahmood Attar, "A New Method for Modeling of Initiation and Propagation of Delamination between [0/q^o] Layers of Laminated Composites", Applied Composite Materials, 2010, 17:441–452.
202. M. Tehrani Dehkordi, H. Nosraty, M. M. Shokrieh, G. Minak, D. Ghelli, “Low Velocity Impact Properties of Intra-ply Hybrid Composites Based on Basalt and Nylon Woven Fabrics,” Journal of Materials and Design, 2010, Volume 31, Issue 8, September 2010, Pages 3835-3844.
203. Shokrieh, M. M., and Atashipour, S. R., "Analysis of Filling Step in Vacuum Assisted Resin Transfer Molding by Considering the Effects of Injection Tube," Mechanical and Aerospace Journal, in Persian, Vol. 5, No. 3, Fall 2009, pp. 41-54.
204. Shokrieh M. M., Nouri A., “Progressive Failure Modeling of Laminated Composite Plates with Cut-Out,” in Persian, Modern Processes of Manufacturing Engineering, No. 1, Spring 2010, pp. 11-16.
205. Shokrieh M. M., Mazloomi S., “An Analytical Method for Calculating Stiffness of Two-Dimensional Tri-Axial Braided Composites,” Composite Structures, 92, (2010), pp. 2901-2905.
206. Shokrieh M. M. and Roham Rafiee, "A review of mechanical properties of isolated carbon nanotubes and carbon nanotube composites," Mechanics of Composite Materials, Vol. 46, No. 2, pp. 155-172, 2010.
207. Shokrieh, M. M., and Rafiee, R. "Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites,” Composite Structures, 2010, 92 (2010) 2415–2420.
208. Shokrieh, M. M., and Mohammad Heidari Rarani, "Comparison of Concrete Slabs Behavior reinforced with Steel Rebars and FRP Pultruded Gratings," Journal of Structures and Steel, in Persian, 5, No. 5, 2009.
209. Shokrieh, M. M., Taheri-Behrooz, F. "Progressive Fatigue Damage Modeling of Cross-Ply Laminates, I: Modeling Strategy" Journal of Composite Materials, Vol. 44, No. 10, pp. 1217-1231, 2010.
210. Taheri-Behrooz, F., Shokrieh, M. M., Lessard, L. B., "Progressive Fatigue Damage Modeling of Cross-Ply Laminates, II: Experimental Evaluation" Journal of Composite Materials, Vol. 44, No. 10, pp. 1261-1277, 2010.
211. Shokrieh, M. M., and Memar, M., “Stress Corrosion Cracking of Basalt/Epoxy Composites,” Applied Composite Materials, 17, pp. 121-135, 2010.
212. Shokrieh, M. M., and Rafiee, R., “Prediction of mechanical properties of an embedded carbon nanotube in polymer matrix based on developing an equivalent long fiber,” Mechanics Research Communications, 37, pp. 235-240, 2010.
213. Shokrieh, M. M., and Rafiee, R. "Prediction of Young’s Modulus of Graphene Sheets and Carbon Nanotubes Using Nano-scale Continuum Mechanics Approach," Journal of Materials and Design, 31 (2), pp. 790-795, 2010.
214. Shokrieh, M. M., and Rafiee, R. "On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase region,” Composite Structures 92 (2010) 647–652.
215. Shokrieh M. M. and Abdolvand, H., "Three Dimensional Thermo-dynamical Modeling of Fire Effect on Polymer Composites, Considering the Variation of Thermal Properties" in Persian, Mechanical and Aerospace Journal, Vol. 5, No. 4, pp. 15-32, 2009.
216. Shokrieh, M. M., Toozandehjani, H. and Jamal Omidi, M., "Fiber Orientation and Cross Section Effects on Energy Absorbing of Composite Tubes under Axial Dynamic Loading,” Mechanics of Composite Materials, Vol. 45, No. 6, 2009.
217. Shokrieh, M. M., and Mohammad Heidari Rarani, "Experimental and analytical studies on one-way concrete slabs reinforced with GFRP molded gratings,” Steel and Composite Structures, Vol. 9, No. 6, pp. 439-454, (2009).
218. Shokrieh, M. M., and Asadi A., "Design of Modified Tabs for Testing of Symmetric Composite Thin Walled Tubes under Pure Torsional and Tensile Loadings," Experimental Mechanics, 2010, 50: 307-320.
219. Mahmood M. Shokrieh, Majid Jamal Omidi, “Investigation of strain rate effects on in-plane shear properties of glass/epoxy composites,” Composite Structures, 91 (2009) 95–102.
220. Shokrieh, M. M., and Karamnejad, A., “Dynamic Response of Strain Rate Dependent Glass/Epoxy Composite Beams Using Finite Difference Method,” International Journal of Mechanical, Industrial and Aerospace Engineering,” pp. 50- 56, 4:1 2010.
221. Shokrieh, M. M., and Memar, M., “Mechanical Properties of Basal Epoxy Composites,” In Persian, Majlesi Journal of Mechanical Engineering, In Persian, pp. 65-72, 2009, Vol. 2, No. 1, Autumn 2008.
222. Yazdchi K., Salehi M., Shokrieh M. M., "Analytical and Numerical Techniques for Predicting the Interfacial Stresses of Wavy Carbon Nanotube / Polymer Composites,” Mechanics of Composite Materials, Vol. 45, No. 2, 2009.
223. Shokrieh, M. M., and Safari Dinalchi S., "Optimization of the manufacturing process of Natural Fibre Thermoplastic Composites in order to minimize Warpage,” In Persian, Majlesi Journal of Mechanical Engineering, Volume 2, No. 3, Page 9-15, 2009
224. Mahmood M. Shokrieh, Majid Jamal Omidi, “Tension behavior of unidirectional glass/epoxy composites under different strain rates,” Composite Structures, 88 (2009) 595–601
225. Mahmood M. Shokrieh, Majid Jamal Omidi, “Compressive response of glass–fiber reinforced polymeric composites to increasing compressive strain rates,” Composite Structures, 89 (2009) 517–523.
226. Fathollah Taheri-Behrooz, Mahmood M. Shokrieh, Larry B., Lessard, "Residual stiffness in cross-ply laminates subjected to cyclic loading," Composite Structures, 85 (2008) 205–212.
227. Shokrieh, M. M., and Mojtaba Haghighi, "Fatigue Damage Modeling of Composite Laminates with Stress Concentration: Regional Elements Model," Iranian Polymer Journal, 18 (3), pp. 233-246, 2009.
228. Shokrieh, M. M., and Safari Dinalchi S., "Residual Stresses in Thermoplastic Composites," Iranian Journal of Polymers Science and Technology, 25, No. 6, pp. 477-493, in Persian, 2009.
229. Ghasemi, A. and Shokrieh, M. M., "Measurement of Released Strains and Calculation of Residual Stresses in Laminated Composites using Integral Method," Esteghlal Journal, Computational Methods in Engineering, 28: 2, pp. 81-93, in Persian, 2009.
230. Shokrieh, M. M., and Atashipour, S. R., Resin Flow in Fiber Preform in Vacuum Assisted Resin Transfer Molding with Flexible Tools," Iranian Journal of Polymers Science and Technology, in Persian, 21, No. 4, pp. 329-338, 2008.
231. Shokrieh, M. M., and Ali Najafi, “An Experimental Evaluation of Micromechanical Approaches for Damping Characterization of Polymer Matrix Composites,” Journal of Composite Materials, Vol. 42, No. 24, pp. 2599-2613, 2008.
232. Shokrieh, M. M., and Jamal Omidi, M., "Tension Behavior of Unidirectional Glass/Epoxy Composites under Different Strain Rates," 88, pp. 595-601, Composite Structures, 2009.
233. Shokrieh, M. M., and Jamal Omidi, M., "Compressive response of glass-fiber reinforced polymeric composites to increasing compressive strain rates, Composite Structures, Composite Structures, 89 (2009), 517–523.
234. Ghasemi, A. and Shokrieh, M. M., "Determination of Integral Method for Determining of Non-Uniform Residual Stresses in Laminated Composites," Iranian Journal of Polymers Science and Technology, in Persian, 21, No. 4, pp. 347-355, 2008.
235. Shokrieh, M. M., and A. Bayat, “Simulation of Ultraviolet Radiation Effects on Mechanical Properties of Glass/Polyester Composites," Sharif Journal of Science and Technology, No. 42, pp. 49-57, in Persian, 2008.
236. Shokrieh, M. M., and Taheri Behrooz, F., “Fatigue life evaluation of unidirectional composites by using residual strain energy," Iranian Journal of Polymer Science and Technology, in Persian, 21, No.1, pp. 19-26, 2008
237. Shokrieh, M. M., and Taheri Behrooz, F., “Modeling of Fatigue Behavior of Unidirectional Carbon/Epoxy Composites,” Engineering Journal of Tehran University, pp. 451-457, in Persian, 2008.
238. Akhbari, M., Shokrieh, M. M., and Nosraty H., “A study on Buckling Behavior of Composite Sheets Reinforced by Hybrid Woven Fabrics,” Transaction of Canadian Society of Mechanical Engineers, Transaction of the CSME, Vol.32, No. 1, pp. 81-89, 2008.
239. Shokrieh, M. M., and Javadpor, Gh., “Penetration Analysis of a Projectile in a Ceramic Composite Armor,” Composite Structures, 82, pp. 269-276, 2008.
240. Shokrieh, M. M., and Heidari Rarani, M., "Analysis of Fiberglass Reinforced Plastic (FRP) Molded Grating," Iranian Polymer Journal, 16 (8) 2007, pp. 511-520.
241. Shokrieh, M. M., Toozandehjani, H. and Jamal Omidi, M., "Considering the Effects of Cross Section and fiber orientation of Composite Tubes under Axial Loading in Energy Absorption," Iranian Journal of Polymers Science and Technology, in Persian, Year 20, No. 3, pp. 289-296, 2007.
242. Mahmood M. Shokrieh, Larry B. Lessard and Adnan Golubovic "Adhesively Bonded Carbon/Titanium Joints under In-Plane and Bending Loads,” Iranian Polymer Journal, 16 (5), 2007, pp. 291-307.
243. Shokrieh, M. M., and Ghasemi, M. R., “Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites Using Hole Drilling Method," Iranian Journal of Polymer Science and Technology, in Persian, 20, No. 4, pp. 337-347, 2007.
244. Shokrieh M. M. and Najafi Ali, "Damping Characterization and Viscoelastic Behavior of Laminated Polymer Matrix Composites Using A Modified Classical Lamination Theory", Experimental Mechanics, (2007) 47:831–839
245. Shokrieh, M. M., and Ghasemi, M. R., “Simulation of Central Hole Drilling Process for Measurement of Residual Stresses in Isotropic, Orthotropic and Laminated Composites Plates,” Journal of Composite Materials, Vol. 41, No. 4, 2007.
246. Mahmood M. Shokrieh and Meysam Rahmat, “Effects of Young’s Modulus on Fundamental Diagrams of a Sleeper on an Elastic Foundation," Applied Mathematical Modeling, 31, pp. 700-711, 2007.
247. Shokrieh, M. M., and Sonbolestan, S. E., "Effects of Structural Parameters on Mechanical Properties of Nanoclay/Polymer Composites," Iranian Journal of Polymer Science and Technology, in Persian, Year 20, No. 2, pp. 187-195, 2007.
248. Shokrieh, M. M., and Zakeri, M. “Generalized Technique for Cumulative Damage Modeling of Composite Laminates,” Journal of Composite Materials, Vol. 41, No. 22, pp. 2643-2656, 2007.
249. Alipour, M. and Shokrieh, M. M., “Design and Weight Optimization of Pin Loaded Composite Plates," In Persian, Majlesi Journal of Mechanical Engineering, Vol. 1, No. 1, pp. 16, 2007.
250. Shokrieh, M. M., and Ali Najafi, "Experimental evaluation of dynamic behavior of metallic plates reinforced by polymer matrix composites," Composite Structures, 75 (2006) 472-478.
251. Shokrieh, M. M., and Fathollah Taheri B., "A unified fatigue life model based on energy method," Composite Structures, 75 (2006) 444-450.
252. Shokrieh, M. M., and A. Bayat, “Effects of Ultraviolet Radiation on Mechanical Properties of Glass/Polyester Composites,” Journal of Composite Materials, Vol. 41, No. 20, pp. 2443-2455, 2007.
253. M. M. Shokrieh and Roham Rafiee, "Simulation of Fatigue Failure in a Full Composite Wind Turbine Blade," Composite Structures, 74, (2006), pp. 332-342.
254. Shokrieh, M. M., and Ghasemi, M. R., “Determination of Calibration Factors of the Hole Drilling Method for Orthotropic Composite using an Exact Solution,” Journal of Composite Materials, Vol. 14, No. 19, pp. 2293-2311, 2006.
255. Shokrieh, M. M., and Ghasemi, M. R., “An Exact Solution for Determining Calibration Factors of the Hole Drilling Method for an Orthotropic Plate,” Iranian Journal of Polymer Science and Technology, in Persian, No. 6, pp. 437-448, 2007.
256. Mahmood M. Shokrieh and Ahmad R. Ghasemi K., “Simulation of Hole Drilling Process in Isotropic, Orthotropic, and Laminated Composite Materials,” Engineering Journal of Tehran University, in Persian, Vol. 40, No. 6, 2006, pp. 825-837.
257. Shokrieh, M. M., and Ghasemi, A. R., “Simulation of Central Hole Drilling Process for Determining of Residual Stresses in Isotropic Materials” in Persian, International Journal of Engineering Science No. 1, Vol. 17, Spring 2006, pp. 1-8.
258. Shokrieh, M. M., and Rafiee, R., “Mechanical Properties of Biaxial and Triaxial Composites Based on Limited Experimental Data,” International Journal of Engineering Science, Vol. 17, No.3-4, 2006, Page 29-35, 2006.
259. Mahmood M. Shokrieh and Meysam Rahmat, “On the Reinforcement of Concrete Sleepers by Composite Materials,” Composite Structures, 76, p.326-337, 2006.
260. Shokrieh, M. M., and Kamali Shahri, S. M “Theoretical and Experimental Studies on Residual Stresses in Laminated Polymer Composites,” Journal of Composite Materials, Vol. 39, No. 24, pp. 2213-2225, 2005.
261. R. Hosseinzadeh, M. M. Shokrieh and L. B. Lessard, "Damage Behavior of Fiber Reinforced Composite Plates Subjected to Drop Weight Impacts" Journal of Composites Science and Technology, 66, pp/ 61-68, 2006.
262. Shokrieh, M. M., and Jamal Omidi, M., “Reinforcement of Metallic Plates with Composite Materials,” Journal of Composite Materials, Vol. 39, No. 8, pp. 723-744, 2005.
263. Hosseinzadeh, R. Shokrieh, M. M., and Lessard, L. B., “Parametric Study of Automotive Composite Bumper Beams in Low-Velocity Impacts,” Composite Structures, 68 (2005) 419-425.
264. Shokrieh, M. M., and Rezaee, D., “Replacement of a Metallic Leaf Spring With a Composite Materials,” Mechanical Engineering, Vol. 12, No. 23, March 2004, pp. 10-13.
265. Shokrieh, M. M., and Hasani, A., “Study of Shear Buckling of Composite Shafts under Torsion,” Composite Structures, Vol. 64/1 pp. 63-69, 2004.
266. Shokrieh, M. M., and Rezaee, D., “Analysis and Optimization of a Composites Leaf Spring,” Composite Structures, 60, (2003), pp. 317-325.
267. Hassani, F., Shokrieh, M. M., and Lessard, L. B., “A Fully Non-Linear 3-D Constitutive Relationship for the Stress Analysis of a Pin-Loaded Composite Laminate,” Composites Science and Technology, 62 (2002), pp. 429-439.
268. Shokrieh, M. M., and Sokhanvar H. R., “Optimum Fiber Volume Fraction of Composite Materials, using Compressive Properties,” in Persian, International Journal of Engineering Science, .No. 3, Vol. 14, pp. 59-74, 2003.
269. Shokrieh, M. M., and Mozafari, M., “Study of Residual Compressive Strength of a Glass/Epoxy Plate under Low Velocity Impact,” Engineering Journal of Tehran University, Vol. 36, No. 3, pp. 409-416, 2002.
270. Shokrieh, M. M., and Bohlool, A., “Sensitivity of Classical Laminated Plate Theory to Variation of Mechanical Properties of Unidirectional plies,” International Journal of Engineering Science, No. 5, Vol.13, Fall 2002, pp. 81-91.
271. Shokrieh, M. M., and Haghiri, K., “Design and Failure Analysis of Composite Pressure Vessels using Effective Parameters,” International Journal of Engineering Science, In Persian, Vol. 12, No. 4, pp.71-80, 2002.
272. Shokrieh, M. M., and Taheri Behrooz, F., “Wing Instability of a Full Composite Aircraft,” Composite Structures, 54, pp. 335-340. 2001.
273. Shokrieh, M. M., and Taheri Behrooz, F., “Study on Bending-Torsion Flutter of wing of a Full Composite Aircraft,” International Journal of Engineering Science, In Persian, Vol. 12, No. 3, pp.11-22, 2001.
274. Shokrieh, M. M., and Taheri Behrooz, F., “Study on Wing Bending-Aileron Rotation Flutter of a Full Composite Aircraft,” International Journal of Engineering Science, In Persian, Vol. 12, No. 1, pp.153-162, 2001.
275. Shokrieh, M. M., and Bohlool, A., “Sensitivity of Finite Element Method to Variation of Mechanical Properties of Unidirectional plies,” in Persian, International Journal of Engineering Science, No. 3, Vol. 13, pp. 135-143, 2002.
276. Shokrieh, M. M., and Lessard, L. B., “Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling,” Journal of Composite Materials, Vol. 34, No. 13, pp. 1056-1080, (2000).
277. Shokrieh, M. M., and Lessard, L. B., “Progressive Fatigue Damage Modeling of Composite Materials, Part II: Material Characterization and Model Verification,” Journal of Composite Materials, Vol. 34, No. 13, pp. 1081-1116, (2000).
278. Shokrieh, M. M., and Mohamadi-Rad H., “The Effect of Sealing Liner on Mechanical Behavior of Composite Vessels under Internal Pressure,” International Journal of Engineering Science, In Persian. Vol. 10, No. 7, pp. 59-72, 1999.
279. Diao, X., Lessard, L. B., and Shokrieh, M. M., “Statistical Model for Multiaxial fatigue Behavior of Unidirectional Plies,” Composites Science and Technology, 59, (1999), pp. 2025-2035.
280. Shokrieh, M. M., and Lessard, L. B., “An Assessment of the Double-Notch Shear Test for Interlaminar Shear Characterization of Unidirectional Graphite/Epoxy Under Static and Fatigue Loading,” Applied Composite Materials, Vol. 5, No. 1, 1998, pp. 46-63.
281. Shokrieh, M. M., and Lessard, L. B., “Modification of the Three-Rail Shear Test for Composite Materials under Static and Fatigue Loading,” 13th Symposium on Composite Materials: Testing and Design, ASTM STP 1242, pp. 217-233,1997.
282. Shokrieh, M. M., Eilers, O., and Lessard, L. B., “Characterization of a Graphite/Epoxy Composite under In-Plane Shear Fatigue Loading,” High Temperature & Environmental Effects on Polymeric Composites: Second Symposium, STP 1302, pp. 133-148, 1997.
283. Shokrieh, M. M., and Lessard, L. B., “Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments I. Theory,” International Journal of Fatigue, Vol. 19, No. 3, pp. 201-207, 1997.
284. Shokrieh, M. M., and Lessard, L. B., “Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments II. Experimental Evaluation,” International Journal of Fatigue, Vol. 19, No. 3, pp. 209-217, 1997.
285. Shokrieh, M. M., and Lessard, L. B., “Effects of Material Nonlinearity on the Three-Dimensional Stress State of Pin-Loaded Composite Laminates,” Journal of Composite Materials, Vol. 30, No. 7, pp. 839-861, 1995.
286. Lessard, L. B., Schmit, A. S., and Shokrieh, M. M., “Three-Dimensional Stress Analysis of Free-Edge Effects in a Simple Composite Cross-Ply Laminate,” Int. Journal of Solids and Structures, Vol. 33, No. 15, pp. 2243-2259, 1996.
287. Lessard, L. B., Shokrieh, M. M., “Two-Dimensional Modeling of Composite Pinned/Bolted Joint Failure,” Journal of Composite Materials, Vol. 29, No. 5, 1995, pp. 671-697.
288. Lessard, L. B., Eilers, O. P., and Shokrieh, M. M., “Testing of In-plane Shear Properties Under Fatigue Loading,” Journal of Reinforced Plastics and Composites, Vol. 14, No. 9, 1995, pp. 965-987.

1. A. Mirdehghan, H. Nosrati, M.M. Shokrieh, R. Ghasemi, “A Micro-mechanical model for analysis of Compression properties of composite sandwich panels reinforced with three dimensional textile made of fiber glass,”, 11^th National Textile Engineering Conference, Guilan University, 2018
2. Shamaei-Kashani, A. R., Shokrieh, M. M. “An experimental-theoretical model to predict mechanical behavior of single-lap bolted composite joints,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
3. S.S. Seyedalikhani, M.M. Shokrieh, A.R. Shamaei Kashani, “A dynamic micromechanical constitutive model to predict the mechanical behavior of glass/epoxy composites” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
4. Ali Mardanshahi, M. M. Shokrieh, and Ahmad Izadi, “Sensitivity-based finite element model updating of fiberglass/foam core sandwich panel with natural frequencies,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
5. S. Farahifar, M. M. Shokrieh, and M. Salamat-talab, “Investigation of Composites-Metal Joints in Repaired Oil Storage Tanks,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
6. Chitsaz Dehaghani, R., Shokrieh, M.M., Taheri-Behrooz, F., “Investigation on the effect of acid etching duration on adhesive bonding of E-glass/Epoxy composites to polyethylene,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
7. M. H. Jamali, M. M. Shokrieh, M. Salamat-Talab, “Loading Rate Effects on the Fracture Toughness of Unidirectional Laminated Composites under mode I Loading,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
8. M. Kharratzadeh, M.M. Shokrieh, M. Salamat-Talab, “The effect of interface fiber angle on the delamination growth of DCB specimens made of woven fabric composites, “The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
9. Salehi, S.D., Shokrieh, M.M., “An investigation on the safe slitting interval in measuring the residual stresses,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
10. Atifeh, S. M., Shokrieh, M. M., and Shamaei-Kashani, A.R., “A novel model to predict the stiffness of single-lap multi-bolt composite joints,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
11. M.A. Rastak, M.M. Shokrieh, L. Barrallier, R. Kubler, “Measurement of residual stresses in laminated polymer composites using the digital image correlation and incremental hole drilling methods,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
12. F. Madani, M. Azadian, M.M. Shokrieh, and H. Hasani, “Investigation of compressive properties of multi-layer fabric reinforced composites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
13. F. Madani, M. Azadian, M.M. Shokrieh, and H. Hasani, “Investigation of in-plane shear behavior of multi-layer woven and weft knitted fabric reinforced composites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
14. F. Madani, M. Azadian, M.M. Shokrieh, and H. Hasani, “Tensile properties of multi-layer woven and weft knitted fabric reinforced composites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
15. Taheri, M. J., Shokrieh, M. M., “A new thermoplastic composite made of knitted-glass/polypropylene,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, Feb. 13-14, 2018.
16. R. Ghajar, M. M. Shokrieh, A. R. Shajari, “Incremental micromechanical modeling of viscoelastic properties of CNT reinforced polymeric composites,” 25th International Conference of Mechanical Engineering (ISME 2017), May. 2-4, 2017.
17. Z. Daneshjoo, M. M. Shokrieh, M. Fakoor, “A novel analytical model for prediction of bridging law in delamination failure of laminated composites under mixed mode I/II,” 25th International Conference of Mechanical Engineering (ISME 2017), May. 2-4, 2017.
18. Nikforooz, M, Golzar, M, Shokrieh, MM, Montesano, J, “Investigation of processing parameters on static properties of glass/polyamide laminated thermoplastic composites”, CANCOM-2017, Canada, 17-20 July, 2017.
19. H. Nopour, A. Kabiri Ataabadi, M. M. Shokrieh, “Optimization of buckling load of a curved fiber composite cylindrical shell under external hydrostatic pressure using genetic algorithm,” 18^th Marine Industrial Conference, Kish Island, 18-21 Oct., 2016.
20. M. M. Shokrieh, A. Ebrahimi, A. Zeinedini, “A Novel Analytical Model to Estimate Mode I Fracture Toughness of an Adhesive-Interlayered DCB Specimen,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
21. M. M. Shokrieh, I. Zibaei, “Elastic Behavior of Self-Healing Composites using a Micromechanical Model,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
22. M. M. Shokrieh, E. Azad, M. Salamat-talab, “The Effect of Nano Modified Sizing Material on the Flexural Properties of Glass/Epoxy Laminated Composites,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
23. M. M. Shokrieh, Z. Daneshjoo, M. Fakoor, “A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II loading,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
24. M. M. Shokrieh, M. Komeijani, M. Salamat-talab, “The Role of Interface Fiber Orientation on the Delamination Growth of ADCB E-glass/epoxy Laminated Composites,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
25. H. Nopour, A. Kabiri Ataabadi, M. M. Shokrieh, “Buckling Behaviors of Variable Stiffness Composite Cylindrical Shell with Elliptical and Circular Cross Sections under External Hydrostatic Pressure,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
26. M. M. Shokrieh, M. Mohaghegh Amin, M. Salamat-talab, Influence of Interface Fiber Orientation on Delamination Initiation and Growth of Laminated Composites under Mode II Loading,” The 5^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-5), Tehran, Iran, December, 20-21, 2016.
27. M. M. Shokrieh, A. R. Shamaei Kashani, “Dynamic constitutive model to predict the shear behavior of UD glass/epoxy composite,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
28. M. M. Shokrieh, S. M. Jalili, “On the Estimation of Residual Stresses using a New Eigen-strain Based Method,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
29. M. M. Shokrieh, S. M. Jalili, “Developing of a New Eigen-strain Based Method for Estimation of Macro Residual Stresses of Laminated Polymeric Composites under Curing Cycles,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
30. M. M. Shokrieh, M. Kheradpisheh, “Design and manufacturing of a new fire retardant coating system for polymer composites” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
31. Shokrieh, M.M., Damirchiloo, S. and Salamat-talab, M., “Predicting cohesive zone parameters in mode I delamination growth of laminated composites using inverse method,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
32. Shokrieh, M.M., Moshrefzadeh-Sani H., “Progressive damage modeling of random short-fiber composites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
33. Shokrieh, M.M., R. Ghasemi, R. Mosalmani, “Enhancement of shear mechanical properties of woven E-glass/epoxy composites using carbon nanofibers,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
34. Shokrieh, M.M., Salamat-Talab, M. and Heidari-Rarani, M., “The role of interface fiber angle on the delamination growth of DCB specimen made of E-glass/epoxy laminated composites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
35. Shokrieh, M.M., Shokrieh, Z., Alaei, M. and Zhao, Z., “Creep and Recovery Behaviors of Using Graphene/Epoxy, MWCNT/Epoxy and Graphene/MWCNT/Epoxy Nanocomposites,” The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.
36. M. Tehrani Dehkordi, H. Nosraty, M.M. Shokrieh, “In-plane Shear Behavior of Intra-ply Hybrid Composites Based on Basalt and Nylon Woven Fabrics,” 2nd International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE2015), 27-28 August 2015, Istanbul, Turkey.
37. M. M. Shokrieh, M. Ghajar, and R. Madoliat, “Progressive damage modeling of open-hole laminated composites,” The 4^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-4), Tehran-Iran, December, 16-17, 2014.
38. M. M. Shokrieh, H. Olia, A. R. Haghighatkhah and M. Esmkhani “The effect of sea water aging on quasi-static and fatigue behaviors of glass/epoxy composites,” The 4^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-4), Tehran-Iran, December, 16-17, 2014.
39. M. M. Shokrieh, A. R. Shamaei, R. Mosalmani, “A novel micromechanical constitutive model to predict the shear behavior of neat and nano-phased epoxy under dynamic loadings,” The 4^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-4), Tehran-Iran, December, 16-17, 2014.
40. M. M. Shokrieh, M. Danesh, M. Esmkhani, “A novel model to predict the fatigue life of hybrid carbon nanofiber/glass short fiber/epoxy composites based on energy method,” The 4^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-4), Tehran-Iran, December, 16-17, 2014.
41. M. M. Shokrieh, M. Esmkhani, A. Haqiqatkhah, “Flexural bending fatigue model for carbon nanofiber/chopped strand glass mat/epoxy nanocomposites,” The 4^th International Conference on Composites: Characterization, Fabrication & Application (CCFA-4), Tehran-Iran, December, 16-17, 2014.
42. M. M. Shokrieh, S. Rezvani, R. Mosalmani, “An investigation of Behavior of Polyester Resin and Polymer Concert under Dynamic Loading,” 22^nd International Conference of Mechanical Engineering (ISME 2014), April. 22-24, 2014.
43. M. M. Shokrieh, S. Soveiti, R. Mosalmani, “Numerical and Analytical Analyses on the Effect of Interphase and the Aspect Ratio of the Representative Volume Element in Calculation of Elastic Modulus of the Nanotube Reinforced Polymer,” 22^nd International Conference of Mechanical Engineering (ISME 2014), April. 22-24, 2014.
44. M. M. Shokrieh, A. R. Shamaei Kashani, R. Mosalmani, “Presenting a Novel Dynamic Constitutive Model for Predicting of Mechanical Behavior of Polymers,” 22^nd International Conference of Mechanical Engineering (ISME 2014), April. 22-24, 2014.
45. M. M. Shokrieh, Z. Daneshjoo, M. Fakoor, “Presenting a Novel Model for Simulating of Mode I Delamination Propagation of Composite DCB Specimens Considering the Effects of R-Curve,” 22^nd International Conference of Mechanical Engineering (ISME 2014), April. 22-24, 2014.
46. M. M. Shokrieh, A. Daneshvar, “Decreased out of Plane Shape of Unsymmetrical Laminates using Carbon Nanotubes,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
47. M. M. Shokrieh, R. Mosalmani, M. Chitsazzadeh, “Viscosity as a Measure of Dispersion State of Carbon Nano Fibers in Epoxy Matrix,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
48. M. M. Shokrieh, M. Esmkhani, A. Haqiqatkhah “Experimental Investigation of Felexural fatigue For Graphene/Carbon-nano-fiber Hybrid Nanocomposite,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
49. M. M. Shokrieh, R. Mosalmani, M. Jamal Omidi, “The Effects of Loading Rate on Shear Mechanical Behavior of Carbon Nano Fiber/Epoxy Nanocomposites,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
50. M. Heidari-Rarani, M. R .M. Aliha, M. M. Shokrieh, M. R. Ayatollahi, “Effect of Thermal Cycle on the Fracture Properties of Epoxy Polymer Concrete,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
51. M. A. Torabizadeh, M. M. Shokrieh, A. Fereidoon, “Shear Response of Glass-Fiber Reinforced Unidirectional Composites at Low Temperature,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
52. M. Sedighi, M. M. Shokrieh, M. Tahmasbi, J. Joudaki, “Effect of Increments Quantity on Determination of Residual Stresses in Incremental Hole Drilling Technique,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
53. M. M. Shokrieh, R. Mosalmani, “A Comparison between Tensile and Shear Mechanical Behaviors of Epoxy and Epoxy Reinforced with Carbon Nano Fibers,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
54. M. M. Shokrieh, M. Olia, M. Fasihi, “Designing and Manufacturing of an Intumescent Fire Retardant Coating System for Polymer Composites,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
55. M. M. Shokrieh, M. A. Kamangar, “On the Estimation of Residual Stresses by the Crack Slitting Method using Eigen strain,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
56. Mahmood M. Shokrieh, Arash Shafiee Sabet, “Analysis of Mechanical Behaviors of a Carbon/Epoxy Composite Artificial Foot Prosthesis,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
57. Taheri-Behrooz F., Shokrieh M.M. Akbari H., Memar Maher B., “The mechanical and tribological behaviors of phenolic polymers modified with silica nanoparticles,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
58. M. M. Shokrieh, B. Memar Maher, A. Fereidoon, “Effects of SiO2 and TiO2 nanoparticles on the mechanical and tribological behaviors of epoxy resin,” The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, Feb. 18-19, 2014.
59. M. M. Shokrieh, M. Esmkhani, A. Haqiqatkhah, Z. Zhao, “A Synthesized Graphene/Epoxy Nanocomposite under Flexural Fatigue Loading,” Proceedings of the 5th International Conference on Nanostructures (ICNS5), 6-9 March, 2014, Kish Island, I.R. Iran.
60. M.M. Shokrieh, S. Khalkhali-Sharif and M. Heidari-Rarani, “Investigation on different failure criteria for prediction of buckling behaviour of laminated composites,” International Conference on New and Advanced Materials (NAMIC 2013), Islamic Azad University, Majlesi Branch, August, 2013, Isfahan, Iran.
61. M. M. Shokrieh, A. Daneshvar, M. Chitsazzadeh, "Estimation of macro-residual stresses of carbon-nanotube/carbon/epoxy laminated nanocomposites using classical lamination theory", Ultra-fine Grained and Nano Structured Materials, UFGNSM, 2013.
62. M. R. Hosseinkhani, H. Tourani, M. M. Shokrieh, M. R. Naimi-Jamal, "Nanoindentation loading effect on the mechanical properties of nanocomposites", Ultra-fine Grained and Nano Structured Materials, UFGNSM 2013.
63. M. M. Shokrieh, A. Daneshvar, "Thermal stability and decrease in residual stresses of polymeric composites using carbon nanofibers", 7th students conference on Mechanical Engineering, STU-2013, University of Tehran, Tehran, Iran, 2013. In Persian.
64. M. M. Shokrieh, R. Mosalmani, M. Jamal Omidi, “A Novel Methodology to Determinate Material Parameters of Nonlinear Strain Rate Dependent Constitutive Model of Polymers,” ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.
65. Aliha, M. R. M., Heidari Rarani, M., Shokrieh, M. Ayatollahi, M. R., “Mode I Fracture Toughness evaluation for a Glass-Fibre Reinforced Polymer Concrete using BD and SCB specimens,” the 2012 International Conference on Frontiers of Mechanical Engineering, Materials and Energy (ICFMEME 2012), China.
66. M. Tehrani Dehkordi, H. Nosraty, M.M. Shokrieh, “Prediction of Damage Tolerance of Intraply Basalt/Nylon hybrid Composites by using Compression after Impact,” 8th National Conference on Textile Engineering- May 2012- Yazd University.
67. M. Tehrani Dehkordi, H. Nosraty, M.M. Shokrieh, M.H. Rajabzadeh, “Flexural and Inplane Shear Behaviors of Basalt/Nylon Intraply Woven Fabric Composites,” 8th National Conference on Textile Engineering- May 2012- Yazd University.
68. M. M. Shokrieh, S. Akbari R., “Determination of Compliance Coefficients of Slitting Method in Determination of Residual Stresses in Isotropic Materials,” In Persian, First Conference in Gas Turbines, 2012, Tehran, Iran.
69. M. M. Shokrieh, M. Fakoor, Z. Daneshjoo, “Design and analysis of sandwich panels as a support structure of solar cells for a GEO communications satellite,” APSCO Fourth International Symposium on Communication Satellite, Indonesia, 2012.
70. Morteza Ahmadi, Mohammad Reza Moghbeli, Mahmood M. Shokrieh, “Unsaturated Polyester-Based Hybrid Nanocomposite,” 7^th MoDeSt Conference, Prague, Czech, 2012.
71. M. M. Shokrieh, A. Daneshvar, S. Akbari R., “Thermal Properties Measurement of Multi-walled Carbon Nanotubes/Polymer Nanocomposites Using Thermomechanical Analysis,” The 3^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-3), Tehran-Iran, December, 18-19, 2012.
72. M. Amin Torabizadeh, M. Mehrdad Shokrieh, A. Fereidoon, “Compressive Response of Unidirectional Polymeric Composites at Low Temperatures,” The 3^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-3), Tehran-Iran, December, 18-19, 2012.
73. M. M. Shokrieh, A. Zeinedini, “A New Data Reduction Method for Calculating Strain Energy Release Rate of ADCB Specimens,” The 3^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-3), Tehran-Iran, December, 18-19, 2012.
74. M. M. Shokrieh, M. Esmkhani, A. R. Haqiqatkhah, “The flexural bending fatigue behavior for graphene/epoxy composites under displacement controlled flexural loading,” The 3^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-3), Tehran-Iran, December, 18-19, 2012.
75. M.M Shokrieh, F. Taheri- Behrooz, I. Yahyapour, “Effect of Stacking Sequence on Failure Mode of Fiber Metal Laminates under Low Velocity Impact,” The 3^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-3), Tehran-Iran, December, 18-19, 2012.
76. M. Zakeri, M. Shayanmeher, M. M. Shokrieh, “Simulation of Atomic Interaction between Carbon Nanotube and Epoxy Resin in a Nanocomposite Volume Element,” 14^th Iranian Inorganic Chemistry Conference, Aug. 28-29, 2012.
77. M. Zakeri, M. M. Shokrieh, M. Shayanmeher, H. Mahdavi, “Analysis of mechanical Behavior of Carbon Nanotube by considering their structures under Various Loading Conditions,” In Persian, 20^th Annual International Iranian Mechanical Engineering Conference, Shiraz, 15-17 May, 2012.
78. M. M. Shokrieh, A. Zeinedini, “Prediction of mode I strain energy release rate in delamination initiation of laminated composites using linearization method,” ICMEAT 2012, Isfahan, 2012.
79. M. M. Shokrieh, I. Zibaee S., “Small Scale Effect on Torsional Response of MWCNT Based on Gradient Elasticity,” International Congress on Nanoscience & Nanotechnology – ICNN2012.
80. M. M. Shokrieh, A. Zeinedini, “A new model to determine the mode I strain energy release rate of laminated composites by considering voids,” ISME, Shiraz University, 2012.
81. M. M. Shokrieh, M. Esmkhani, “Fatigue life prediction of nano-particles/epoxy composites based on normalized stiffness degradation model and micromechanical approach,” 1st international conference on nanostructures and nanomaterials: science and applications, Masjed Soleiman, 2012.
82. M. M. Shokrieh, H. R. Shahverdi, F. Vahedi, M. Esmkhani, “Mechanical and electrical properties improvement of epoxy polymer composites with vapor grown carbon nanofibers, 1st international conference on nanostructures and nanomaterials: science and applications, Masjed Soleiman, 2012.
83. M. M. Shokrieh, H. Shahverdi, F. Vahedi, M. Esmkhani, “Highly crystalline graphite nano platelet/epoxy nanocomposites; Mechanical and Electrical properties”, The International Conference on Experimental Mechanics and Dynamics (X-Mech 2012), Tehran, Iran.
84. M. M. Shokrieh and S. Akbari R., “Effect of Post-Cure Time on Residual Stress Distribution in Carbon/Epoxy Laminated Composites”, The International Conference on Experimental Mechanics and Dynamics (X-Mech 2012), Tehran, Iran.
85. M. M. Shokrieh, S. Akbari R., A. Daneshvar, “Slitting Measurement of Residual Stresses in Laminated Composites Using Pulse Method”, The International Conference on Experimental Mechanics and Dynamics (X-Mech 2012), Tehran, Iran.
86. M. R. M. Aliha, H. Heidari-Rarani, M. Shokrieh, M. R. Ayatollahi, “Determination of Fracture Toughness and Indirect Tensile Strength for a Polymer Concrete (PC) Material using an Experimental Method”, The International Conference on Experimental Mechanics and Dynamics (X-Mech 2012), Tehran, Iran.
87. M. M. Shokrieh, A. Zeinedini, S. Soveiti, “Effects of crack neighbor fiber angle on the mode I strain energy release rate of q//q laminated composites,” National Conference in Simulation of Mechanical Systems, Ahvaz Azad University, 2012.
88. M. M. Shokrieh, A. R. Ghaanee Mohammadi, “Finite Element Modeling of Thermal Residual Stresses in Fiber reinforced Laminated Composites,” National Conference on Mechanical Engineering, Shiraz Azad University, 2012.
89. M. Zakeri, M. Shayanmeher, H. Mahdavi, M. M. Shokrieh, “An investigation on the structure of CNT on its mechanical behavior under various loading conditions,” The 11^th Iranian Aerospace Society Conference, In Persian, Tehran, 2012.
90. M. M. Shokrieh, A. Daneshvar, S. Akbari R., and “Measurement of residual stresses in laminated carbon/epoxy composites using incremental hole drilling method,” The 11^th Iranian Aerospace Society Conference, In Persian, Tehran, 2012.
91. M. M. Shokrieh, A. Zeinedini, “An investigation on the effect of the near crack fiber angles on mode I strain energy release rate of glass /epoxy composites with 0/q layup,” The second national symposium on mechanical engineering, Islamic Azad university, Shiraz, 2012.
92. M. M. Shokrieh, M. Esmkhani, H. Shahverdi, F. Vahedi, “Effect of organic solvents on the mechanical properties of graphene/epoxy Nanocomposites,” Proceedings of the 4th International Conference on Nanostructures (ICNS4), 12-14 March, 2012, Kish Island, I.R. Iran.
93. M. M. Shokrieh, M. Akbari, A. Daneshvar, “Residual Stress Measurement through the Thickness of a Carbon Nanotube Reinforced Nanocomposite,” Proceedings of the 4th International Conference on Nanostructures (ICNS4), 12-14 March, 2012, Kish Island, I.R. Iran.
94. M. M. Shokrieh, A. Daneshvar, M. Chitsazzadeh , "A novel method to decrease micro-residual stresses of fibrous composites by adding carbon nanotube", 3rd International conference on Ultra-fine Grained and Nano Structured Materials, UFGNSM 2011, University of Tehran, Tehran, Iran, 2011.
95. F. Vahedi, H. Shahverdi, M. M. Shokrieh, “Effect of fabrication methods on mechanical properties of graphene/epoxy nanocomposites,” International conference on Ultra-fine Grained and Nano Structured Materials Tehran, 2011.
96. M. M. Shokrieh, A. Saeedi, M. Chitsazzadeh, "Effects of multi-walled carbon nanotubes on the mechanical properties of glass/polyester nanocomposites, International conference on Ultra-fine Grained and Nano Structured Materials, Tehran, 2011.
97. M. M. Shokrieh, M. Akbari, “Incremental Slitting Determination of Residual Stress in Rolled Aluminium Plate Using Strip Loads and Series Expansion Approaches,” 3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, Tehran.
98. M. M. Shokrieh, M. Safarabadi, “An Investigation on the Effects of the Micromechanical Residual Stresses on the Residual Stress field due in Curing of Laminated Composites,” 3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, in Persian, Tehran.
99. M. M. Shokrieh, A. R. Ghaanee Mohammadi, “Effect of Fiber Volume Fraction on Residual Thermal Stresses Generated Due to Curing Process of Fiber-reinforced Composites3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, in Persian, Tehran.
100. M. M. Shokrieh, M. R. Hosseinkhani," Nano-composite coating for corrosion protection of fiber reinforced plastics in acidic media,” 15^th Iranian Chemistry Congress, Hamedan, 2011.
101. M. M. Shokrieh, M. Elahi, “Evaluation of two micromechanical models in prediction of Yong modulus of a polymer concrete,” 5th Joint Conference of Iranian Metallurgical Engineers Society and Iranian Foundry Men’s Society, Isfahan, in Persian, 2011.
102. M. M. Shokrieh, H. R. Rajabpour S., M. Heidari R., “Finite Element Modeling of Model I delamination in Laminated Composites using Timoshenko Beam Element with deformation degrees of Freedom,” National Mechanical Engineering Conference, Energy and Optimization, Marvdasht Islamic Azad University, In Persian, 2011.
103. M. M. Shokrieh, M. Heidari Rarani, “Design and manufacturing of Water distillation slab using polymer concrete,” The 1^st International Conference on Non-osmosis Concretes, In Persian, Rasht, 2011.
104. M. M. Shokrieh, S. M. Mahdavi, “A Theoretical Model for Considering the Effects of Interphase Region on Load Transfer in Reinforced Polymer with Single-Wall Carbon Nanotube”, The first seminar on the technology development of oil, gas and petrochemical industries,” in Persian, Ahvaz, Iran, 2011.
105. Majid Tehrani Dehkordi, Hooshang Nosraty, Mahmood Mehrdad Shokrieh and Giangiacomo Minak, “The Effects of Hybridization on the Tensile and Compressive Properties of Basalt/Nylon Intraply Woven Fabric Composites,” The 11th Asian Textile Conference, Korea, 2011.
106. Majid Tehrani Dehkordi, Hooshang Nosraty and Mahmood Mehrdad Shokrieh, “Prediction of Tensile Behaviour of Hybrid-Woven Fabrics at Initial Extension,” The 11th Asian Textile Conference, Korea, 2011.
107. Majid Tehrani Dehkordi, Hooshang Nosraty and Mahmood Mehrdad Shokrieh, “Prediction of the amount of Damage in Hybrid Basalt and Nylon Composites under Impact using Residual Buckling Strength Model,” 8th National Conference on Textile Engineering- October 2011- Yazd, Iran.
108. M. M. Shokrieh, A. Saeedi, “Mechanical Properties of Multi-Walled Carbon Nanotube/Polyester Nanocomposites,” 2nd Conference on Application of Nanotechnology in Science, Engineering and Medicine (NTC2011).
109. M. A. Torabizadeh, M. M. Shokrieh, A. Fereidoon, “Comparison of mechanical properties of unidirectional composite predicted from analytical models and experimental evaluation at different temperatures,” 19^th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran.
110. M. M. Shokrieh, H. R. Rajabpour S., M. Heidari R., “Experimental Determination of Mode-I Interlaminar Fracture Toughness of Laminated Composites made of Unidirectional Plies,” 19^th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, In Persian, Iran.
111. M. M. Shokrieh, M. Elahi, “Comparison of Mori-Tanaka and Double Inclusion Methods in Estimation of Stiffness Properties of a Composite Material made of Micro–Mica plates and Epoxy Resin,” 19^th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, In Persian, Iran.
112. M. M. Shokrieh, S. M. Mahdavi, “Equivalent Fiber Model for Calculation of Stiffness of a CNT/Epoxy Composite using Micromechanics Method,” 19^th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, In Persian, Iran.
113. M. M. Shokrieh, S. Akbari, “Simulated Slitting method for Determination Of Residual Stresses in Isotropic Materials,” 19^th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, In Persian, Iran.
114. M. M. Shokrieh, S. M. A. Alvani, “Three Dimensional Temperature Distribution in Woven Fabric Laminated Composites Exposed to Fire,” Forth Common Conference of Iranian Metallurgical Engineers Society and Iranian Scientific Casting Association, In Persian, Tehran, 2010.
115. M. M. Shokrieh, S. M. A. Alvani, “Three Dimensional Modeling of Buckling Load of Woven Fabric Composite Plates Exposed to Fire,” IAUMECH2011, National Conference on New Technologies in Mechanical Engineering, Shiraz, 2011.
116. M. M. Shokrieh, H. R. Rajabpour, “Effects of Interlaminar deviated Micro-cracks around Crack Front on Delamination of Laminated Composites,” IAUMECH2011, National Conference on New Technologies in Mechanical Engineering, Shiraz, In Persian, 2011.
117. M. M. Shokrieh, M. Salamat-Talab, “Theoretical and Finite Element Analysis on Initiation and Propagation of Model I Delamination on Double Cantilever Beam using Cohesive Area Model,” IAUMECH2011, National Conference on New Technologies in Mechanical Engineering, Shiraz, 2011.
118. M. M. Shokrieh, S. M. A. Alvani, “Calculation of Buckling Load for Woven Fabric Laminated Composites Exposed to Fire,” The 10th Iranian Aerospace Society Conference, In Persian, Tehran, 2011.
119. M. M. Shokrieh, H. R. Rajabpour S., M. Heidari R., “Interlaminar Fracture Toughness of Multidirectional DCB Specimen in Mode I, using Equivalent Lay-up Method,” The 10^th Iranian Aerospace Society Conference, In Persian, Tehran, 2011.
120. M. A. Torabizadeh, M. M. Shokrieh, A. Fereidoon, “Damage in GFRPs due to Low Velocity Impact at Low Temperatures,” The 10^th Iranian Aerospace Society Conference, In Persian, Tehran, 2011.
121. M. M. Shokrieh, A. R. Kefayati, M. Chitsazzadeh, “Investigation of mechanical properties of clay/epoxy nanocomposites,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December, 27-30, 2010.
122. Mahmood M. Shokrieh, Ashkan M. Aghdami, “A Novel Model for Simulation of Glass/Polyester Pultrusion Process,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December, 27-30, 2010.
123. M. M. Shokrieh and R. Rafiee, “Development of a Full Range Multi-scale Model to Obtain Elastic Properties of CNT/Polymer Composites,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December, 27-30, 2010.
124. M. R. Ayatollahi, M. M. Shokrieh, S. Shadlou, A.R. Kefayati, M. Chitsazzadeh, “Fabrication of Epoxy/Multi-Walled Carbon Nanotube-Nanoclay Nanocomposites: Investigation of Fracture Toughness,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December, 27-30, 2010.
125. Mahmood M. Shokrieh, Mohsen Ghajar, “A simple model for simulation of mode I strain energy release rate of a rectangular laminated composite,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December, 27-30, 2010.
126. M. R. Ayatollahi, S. Shadlou, M.M. Shokrieh, “The effect of multi-walled carbon nanotube dimensions on mechanical properties of epoxy-based nanocomposites,” The 2^nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2), Kish Island-Iran, December 27-30, 2010.
127. M. R. Ayatollahi, S. Shadlou, M. M. Shokrieh, “The correlation between fracture surfaces and fracture behavior of Epoxy/MWNT nanocomposites,” 3^rd International Congress on Nanoscience and Nanotechnology, Shiraz, 2010.
128. M. M. Shokrieh, A. R. Kefayati, M. Chitsazzadeh, “Investigation of the fracture properties of Epoxy/Clay nanocomposite and its polymer concrete,” 3^rd International Congress on Nanoscience and Nanotechnology, Shiraz, 2010.
129. M. Chitsazzadeh, H. Shahverdi1, M. M. Shokrieh, “Investigation of the ultrasonic dispersion of multi-walled carbon nanotubes (MWNTS) in vinyl ester polymer,” 3rd International Congress on Nanoscience and Nanotechnology, ICNN2010, Shiraz.
130. Shokrieh, M. M., Rahimi, S., Heidari, R. M., “Numerical Calculation of Interlaminar Fracture for Multidirectional Double Cantilever Beam, using properties of Unidirectional ply,” Third National Symposium in Mechanical Engineering, In Persian, Khomeinishahr, 2010.
131. Shokrieh, M. M. and Torabizadeh A., and Fereidoon, A., “Tensile Response of GFRPs at Low Temperature using Progressive Damage Modeling,” International Conference on Applied Mechanics, Amsterdam, Netherlands, Sept. 28-30, 2010.
132. Chitsazzadeh, M., Shahverdi, H. and Shokrieh, M. M., “Fabrication of Multi-Walled Carbon Nanotube/Vinyl Ester Nanocomposites: Dispersion and Stabilization,” Conference on Diffusion in Solids and Liquids: Mass Transfer, Heat Transfer and Microstructure and Properties, DSL-2010, 05-07 July, 2010, Paris – France.
133. Chitsazzadeh, M., Shahverdi, H. and Shokrieh, M. M., “An Investigation on the effects of Multiwall Carbon Nanotubes and Nanosilver on Electrical Conductivity of Vinyl ester Resin,” 7^th Nanotechnology Iranian Students Conference, In Persian, 2010.
134. Shokrieh, M. M. and Karamnejad, A., “Transient Response of Strain Rate Dependent Composite Plate Using Finite Difference Method,” International Mechanical Engineering Congress and Exhibition, 12-18 Nov. 2010, Canada.
135. Shokrieh, M. M. and Ghannee Mohammadi,A . R., “Investigation of Residual Thermal Stresses in Fiber Reinforced Composites Incorporating Inhomogeneous Interphase Region,” International Mechanical Engineering Congress and Exhibition, 12-18 Nov. 2010, Canada.
136. Shokrieh, M. M. and Ghannee Mohammadi, A. R., “Finite Element Modeling of Residual Thermal Stresses in Fiber- Reinforced Composites Using Different Representative Volume Element,” World Congress on Engineering, WCE-2010, London, 2010.
137. Shokrieh, M. M. and Torabizadeh A., “An Investigation on Damage of Quasi-Isotropic laminated Composites under Static Tensile Loading in Low Temperature,” 18^th Annual International Conference on Mechanical Engineering, In Persian, 11-13 May, Sharif University, Iran, 2010.
138. Shokrieh M. M. Heidari-Rarani, M. and Ayatollahi, M. R., “A New Model for Determining the Mode-I Fracture Toughness of DCB Specimen using Timoshenko Beam on Two-Parameters Elastic Foundation,” 18^th Annual International Conference on Mechanical Engineering, In Persian, 11-13 May, Sharif University, Iran, 2010.
139. Shokrieh, M. M. Taherkhani Ramezanpour, F., “Effects of Machining Parameters on and the lay-up Configuration on Delamination Phenomenon of Drilling Process of Polymer Composites,” In Persian, 11th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, 2010.
140. Shokrieh, M. M. and Ghannee Mohammadi, A. R., “Introduction of A New Finite Element Model to Investigate the Residual Thermal Stresses in Fiber-Reinforced Composites,” The 9^th Iranian Aerospace Society Conference Feb. 8-10/2010, Islamic Azad University, Science and Research Branch.
141. Shokrieh, M. M. and Parsaee, A., “Investigation of Representative Volume Element in Micro-Buckling,” The 9^th Iranian Aerospace Society Conference Feb. 8-10, 2010, Islamic Azad University, Science and Research Branch.
142. Shokrieh, M. M. and Parsaee, A., “Calculation of In-Plane Mechanical Properties of AS4/301-6 Carbon/Epoxy Composites” The 9^th Iranian Aerospace Society Conference Feb. 8-10, 2010, Islamic Azad University, Science and Research Branch.
143. Tehrani Dehkordi, M., Shokrieh, M. M., Nosraty, H. Minak, G. “The Effects of Hybridization on the Impact Properties of Basalt/Nylon Intraply Woven Fabric Composites,” The 1st International and the 7th National Conference on Textile Engineering -October 2009- Rasht, Iran.
144. Tehrani Dehkordi, M., Shokrieh, M. M., Nosraty, H. Minak, G. “Compressive Residual Strength of Intraply Basalt/Nylon Hybrid Composite Laminates Subjected to Low-Velocity,” Proceedings of the 10th Asian Textile Conference ~ATC-10 ~ September 7-9, 2009 Ueda, Japan.

146. Shokrieh, M. M. and Elhamian, S. M. "There Dimensional Analysis of Behavior of Carbon-Carbon Composites under Shear Force at 1000 K Temperature,” Student Conference in Mechanical Engineering, Mashhad Azad University, 2010.
147. Shokrieh, M. M. and Elhamian, S. M. "There Dimensional Damage Analysis of Carbon-Carbon Composites due to Increasing Thermal Stresses,” Student Conference in Mechanical Engineering, Mashhad Azad University, 2010.
148. Shokrieh, M. M. and Memar, M. "Aging of Basalt/Epoxy Composites under SCC,” the 4th International Conference of the Institute of Materials Systems "IMS/4," entitled as: Applications of Traditional and High Performance Materials in Harsh Environments, Sharja, AUS March 24-25, 2010.
149. Shokrieh, M. M. and Rafiee, R. "Load Transfer Efficiency in CNT/Epoxy: A Parametric Study on the Effect of CNT Length and Non-bonded Interphase,” Proceedings of the 3rd Conference on Nanostructures (NS2010), March 10-12, 2010, Kish Island, Iran.
150. Shokrieh, M. M. and Rafiee, R. "Determination of Stochastic properties of CNT/Epoxy Composites,” The Tenth International Conference on Computational Structures Technology, Valencia, Spain from 14-17 September 2010.
151. Shokrieh, M. M. Taherkhani Ramezanpour, F., “Investigation of Machining Parameters and stacking sequence on Delamination of Polymer Composites,” 10th Iranian Conference on Manufacturing Engineering, ICME 2010, March 1st - 3rd, 2010, Babol Noshirvani University of Technology.
152. Shokrieh, M. M. Ghannee Mohammadi, A. R. “Investigation of Thermal Residual Stresses Due to Curing Process of Fiber-Reinforced Composites by Finite Element Analysis,” 10^th Iranian Conference on Manufacturing Engineering, ICME 2010, March 1^st - 3^rd, 2010, Babol Noshirvani University of Technology.
153. Shokrieh, M. M. Mahmood Aghdami, A. “Simulation of Thermoset Resin Curing using Finite Element Method,” 10^th Iranian Conference on Manufacturing Engineering, ICME 2010, March 1^st - 3^rd, 2010, Babol Noshirvani University of Technology, in Persian.
154. Shokrieh, M. M. and Parsaee, A., "Simulation of Compressive Behavior of Glass/Epoxy Composites via Microbuckling,” The 2^nd National Manufacturing Engineering Conference, Najafabad, 2009, in Persian.
155. Shokrieh, M. M. and Parsaee, A., "Investigation of Representative Volume Element in Microbuckling,” The 2^nd National Manufacturing Engineering Conference, Najafabad, 2009, in Persian.
156. Shokrieh, M. M. and Nouri, A., "Investigation on Damage of Composite Plates in Post Buckling Region using Progressive Damage Model,” The 2^nd National Manufacturing Engineering Conference, Najafabad, 2009, in Persian.
157. Shokrieh, M. M. and Nouri, A., “The investigation of damage effect in the buckling load of laminated composite plates,” The 2^nd National Manufacturing Engineering Conference, Najafabad, 2009, in Persian.
158. Shokrieh, M. M. and Elhamian, S. M., “Study of stress distribution and mechanical properties on 3-D orthogonal carbon-carbon composites,” The 2^nd National Manufacturing Engineering Conference, Najafabad, 2009, in Persian.
159. Shokrieh, M. M. and Elhamian, S. M., “Analysis of 3-D laminated carbon-carbon composite behavior against increasing external shear load in different temperatures,” The 2^nd National Manufacturing Engineering Conference, Nagjafabad, 2009, in Persian.
160. Shokrieh, M. M. and Mosalmani, R., “A Novel Model of Hydrodynamic Friction in SMC Compression Molding Considering Thermal Effects,” 9^th International Seminar on Polymer Science and Technology, Iran, 17-21 Oct. 2009.
161. Shokrieh, M. M. and Askari, A., “Structural Similitude for Composite Plates in Impact Loading,” 9^th International Seminar on Polymer Science and Technology, Iran, 17-21 Oct. 2009.
162. Ayatollahi, M. R., Shadlou, A., and Shokrieh, M. M., “Numerical Simulation of Nonlinear Mechanical Behavior of Single-Walled Carbon Nano-Tubes,” 9^th International Seminar on Polymer Science and Technology, Iran, 17-21 Oct. 2009.
163. Shokrieh, M. M. and A. M. Aghdami, “Simulation of Curing Process of a Polymer Resin with a Finite Element Method,” 9th International Seminar on Polymer Science and Technology, Iran Polymer and Petrochemical Institute, Tehran, Iran, 17-21 October 2009.
164. Shokrieh, M. M. and A. Askari, “Structural Similitude for Composite Plates in Impact Loading,” 9th International Seminar on Polymer Science and Technology, Iran Polymer and Petrochemical Institute, Tehran, Iran, 17-21 October 2009.
165. Shokrieh, M. M. and Rafiee, R. "on the Non-linear Tensile Behavior of an Embedded Carbon Nanotube in Polymer Matrix with Non-bonded Interphase Region," ICCST15, FEUP, Porto, 2009.
166. Shokrieh, M. M. and Rafiee, R. "Calculation of Young’s Moduli of Graphene Sheets and Carbon Nanotubes using Analytical Solution and Numerical Simulation," ICTAM, 2009.
167. Shokrieh, M. M. and Omidi, M. J., "Development of a strain-rate dependent progressive damage model for crash analysis of composite laminate," 9th International Conference on the Mechanical and Physical Behavior of Materials under Dynamic Loading, DYMAT 2009, Brussels – Belgium, 7 - 11 September 2009.
168. Shokrieh, M. M. and Safari, S., "Minimization of Warpage in Short Fiber Reinforced Thermoplastic Composites," Ninth Conference of Manufacturing and Production Engineering, Birjand University, 2009.
169. Shokrieh, M. M. and Parsaee, A., "Modeling of Damage of Carbon Fibers," Ninth Conference of Manufacturing and Production Engineering, Birjand University, 2009.
170. Shokrieh, M. M. and Omidi, M. J., "Experimental Studies on the Effects of Strain rate on the Compressive Properties of Glass/Epoxy Composites," in Persian, Eight International Conference of Iran Aerospace Society, Isfahan, 2009.
171. Shokrieh, M. M. and Torabizadeh A., "Progressive failure analysis of composite plates", Eight International Conference of Iran Aerospace Society, Isfahan, 2009.
172. Shokrieh, M. M. and Kashizadeh E., "Influence of Thermal Cycles on Mechanical Strength of a Polymer Concrete," Proceedings of the International Conference on Recent Advances in Materials, Processing and Characterization, India, 2008.
173. Shokrieh, M. M. and Saadat A. P., "Mechanical Properties of Date Palm Leaf (DPL) Fiber Polyolefin Composites," International Conference on Composite Material Nano Structure, IC2MS08, Malaysia, 2008.
174. Shokrieh, M. M. and Memar, M., "Stress Corrosion Cracking of Basalt/Epoxy Composite under Bending Loading and In Acidic Medium," 1st International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18, 2008, Kish-Iran.
175. Shokrieh, M. M. and Nouri, A. R., "Geometrically Nonlinear Analysis of Laminated Composite Shells," 1st International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18, 2008, Kish-Iran.
176. Shokrieh, M. M. and Mosalmani, R., "Different Types of Friction Forces between Sheet Molding Compound (SMC) Charge and Cavity Surface of Mold in Compression Molding," 1st International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18, 2008, Kish-Iran.
177. Yazdchi K., Salehi M., Shokrieh M. M., "Three Dimensional Finite Element Modeling of Single-Walled Carbon Nanotubes," 1st International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18, 2008, Kish-Iran.
178. Shokrieh, M. M. and Rezaee Azariani, A., "Commercialization of Research Ideas," First International Conference in Zeolite,"' Amirkabir University, 2008.
179. Shokrieh, M. M., and Memar, M., "Investigation and Comparison of Flexural Properties of Basalt/Epoxy and Glass/Epoxy Composites," 16th Annual (International) Conference on Mechanical Engineering, 2008. Kerman, Iran.
180. Shokrieh, M. M., and Niakan, S., "A New Model for Calculation of Elasticity Modulus of Nano-Composites reinforced with Carbon Nano-Tubes," 16th Annual (International) Conference on Mechanical Engineering, 2008.
181. Shokrieh, M. M., and Nouri, A., "Geometrically nonlinear analysis of laminated composite shells element and investigation into the post buckling response of composite shells," 16th Annual (International) Conference on Mechanical Engineering, 2008.
182. Shokrieh, M. M., "Situation of Composites Technology in Iran," Keynote Speech, International Conference on Composite Material Nano Structure, IC2MS08, Malaysia, 2008.
183. Shokrieh, M. M., and Mosalmani R., "Predicting molding forces during compression molding of sheet molding compound (SMC) by a thermal dependent viscous transversely isotropic model," Seventh International Conference on Composite Science and Technology (ICCST/7), January 20 – 22, 2009, Sharjah.
184. Shokrieh, M. M., and Omidi M. J., "Tensile Response of Glass-fiber Reinforced Polymeric Composites under Different Strain Rates," Seventh International Conference on Composite Science and Technology (ICCST/7), January 20 – 22, 2009, Sharjah.
185. Shokrieh, M. M., and Attar, P., "A New Method for Modeling of Initiation and Propagation of Delamination between [0/θo] Layers of Laminated Composites" Seventh International Conference on Composite Science and Technology (ICCST/7), January 20 – 22, 2009, Sharjah.
186. Shokrieh, M. M., and Atashipour, S. R., "Resin Propagation in Fiber Preform in Vacuum Assisted Resin Transfer Molding Process," ICCES 08 International Conference on Computational and Experimental Engineering and Sciences, Hawaii, 2008, USA.
187. Shokrieh, M. M., and Atashipour, S. R., "A review on Resin Transfer Molding for Manufacturing of Polymer Composites," National Conference of Manufacturing and Production Engineering, Isfahan, Azad University of Najafabad, 2007.
188. Shokrieh, M. M., and Atashipour, S. R., "Analysis of Vacuum Assisted Resin Transfer Molding," 2^nd Tehran International Congress on Manufacturing Engineering, Dec. 10- 13, 2007, IUST, Tehran, Iran.
189. Shokrieh, M. M., and Atashipour, S. R., "The Effect of Injection Pipe on Constant Pressure Vacuum Assisted Resin Transfer Molding Process," 2^nd Tehran International Congress on Manufacturing Engineering, Dec. 10- 13, 2007, IUST, Tehran, Iran.
190. Shokrieh M. M. and Heidari-Rarani, M., "Reinforcement of Concrete Slabs with FRP Pultruded Grating (Analytical and Finite Element Solutions)," The 5-th Moscow International Conference, Theory and Practice of Technologies of Manufacturing, Composite Materials and New Metal Alloys Products, (TMCMM), Moscow, Russia, April, 24-27, 2007.
191. Fakhar N., and Shokrieh, M. M., "A New Procedure for Dynamic Calibration of Drop Weight Impact Tester," 2^nd Tehran International Congress on Manufacturing Engineering, Dec. 10- 13, 2007, IUST, Tehran, Iran.
192. Shokrieh, M. M., "World of Composites," Keynote Lecture, The 7^th Conference of Iranian Aerospace Society, Feb. 19- 21, 2008.
193. Shokrieh, M. M., Askari, H., and Abdolrahim, N., "Buckling and Post-Buckling of Composite Plates using Progressive Damage Modeling," The 7^th Conference of Iranian Aerospace Society, Feb. 19- 21, 2008.
194. Shokrieh, M. M., and Atashipour, S. R., "Flow of Resin in Fiber Preform in Vacuum Assisted Resin Transfer Molding using Semi-Flexible mold," The 7^th Conference of Iranian Aerospace Society, Feb. 19- 21, 2008.
195. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Finite Element Modeling of Single-Walled Carbon Nanotubes,” 16th Annual (International) Conference on Mechanical Engineering, 2008, Kerman, Iran.
196. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Effect of Wall thickness on the Mechanical properties of Single-walled Carbon Nanotubes,” 17th Conference of Iranian Aerospace Society, 2008, Tehran, Iran.
197. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Influence of Van der Waals interaction on the Mechanical properties of Single-walled Carbon Nanotubes,” 16th Annual (International) Conference on Mechanical Engineering, 2008, Kerman, Iran.
198. K. Yazdchi, M. Salehi and M. M. Shokrieh, “An analytical approach to determination of Young's modulus of wavy carbon nanotubes,” 16th Annual (International) Conference on Mechanical Engineering, 2008, Kerman, Iran.
199. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Influence of Van der Waals interaction on the Mechanical properties of Single-walled Carbon Nanotubes with Introducing Effective Wall thickness,” 13th European Conference on Composite Materials, 2008, Stockholm, Sweden.
200. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Analytical and numerical techniques to predict interfacial stresses of carbon nanotube/polymer composites,” MCM Conference, 2008, Riga, Latvia.
201. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Mechanical Properties of Double-Walled Carbon Nanotubes,” 17th Conference of Iranian Aerospace Society, 2008, Tehran, Iran.
202. K. Yazdchi, M. Salehi and M. M. Shokrieh, “Non-dimensional Analysis of Interfacial Stresses of Wavy CNT/Polymer Composites Using a New RVE,” 17th Conference of Iranian Aerospace Society, 2008, Tehran, Iran.
203. K. Yazdchi, M. Salehi and M.M. Shokrieh, “Fiber Pull-out modeling of Wavy CNT/polymer composites, International Conference on MEMS and Nanotechnology,” (ICMN '08), 13-15th May 2008, Kuala Lumpur, Malaysia.
204. Akhbari, M., Rashidi, A., Shokrieh, M. M., Nosraty, H., and Jeddi, A., “A Study on Mechanical Behavior of Woven Fabric Composites under Impact and Buckling,” Sixth National conference of Iran Textile Engineering, Isfahan, Iran, 2007.
205. Akhbari, M., Shokrieh, M. M., Nosraty, H., Zebarjadnejad, S. M. H., and Rashidi, A., “A Study on Buckling Behavior of Composite Sheets Reinforced by Hybrid Woven Fabrics,” The 9th Asian Textile Conference, June 28-30, 2007, Taiwan.
206. Akhbari, M., Nosraty, H., Shokrieh, M. M., Jeddi, A. and Mohammadian, M., “The Comparison between Impact Resistance of Woven fabric Composites and Cross-Ply Unidirectional Composites,” The 9th Asian Textile Conference, June 28-30, 2007, Taiwan.
207. Shokrieh, M. M., Heidari Rarani, M., and Tavakoli, N. “Main Challenges in Production Development of Compressed Natural Gas Vessels in Iran,” 1st CNG Composite Cylinder Symposium, May 26, 2007.
208. Shokrieh, M. M., and Hamid R. Abdolvand, "Finite Element Analysis of Polymer Composites under Fire," The 2nd Conference on Fire Protection of Buildings, Feb. 20-21, 2007, in Persian, Tehran, Iran.
209. Shokrieh, M. M., and Hamid R. Abdolvand, "Determination of Fire Effects on Polymer Composites by Considering Changes in Thermal Properties," 15 Annual International Conference of Mechanical Engineering, 15-17 May, 2007, Amirkabir University, in Persian.
210. Shokrieh, M. M., and Vahid Nasir, "Modeling of Static and Vibration Behavior of Composite Gratings"," 15 Annual International Conference of Mechanical Engineering, 15-17 May, 2007, Amirkabir University, in Persian.
211. Shokrieh, M. M., and Mehdi Esmaeili "Impact Analysis of a Composite Guardrail," International Conference on Steel and Composite Structures, ICSCS'07, Manchester, UK, 30 July to 1 August 2007.
212. Shokrieh, M. M., H. Toozandehjani and M. Jamal Omidi, "Fiber Orientation and Cross Section Effects of Composite Tubes under Axial Dynamic Loading on Energy Absorption," the Sixth International Conference on Composite Science and Technology (ICCST/6), 2007.
213. S. E. Sonbolestan and M. M. Shokrieh, "Nano-Clay/Polymer Composites Characterization by Analytical models ", First International Congress on Nanoscience and Nanotechnology Faculty of Engineering , University of Tehran, December 2006
214. S. E. Sonbolestan and M. M. Shokrieh, "Influence of micro-structural parameters on the mechanical properties of a polymer/clay nanocomposite," First International Congress on Nanoscience and Nanotechnology Faculty of Engineering, University of Tehran, December 2006.
215. Shokrieh, M. M., and Taheri- Behrooz F., "A phenomenological Model to study the Fatigue Behavior of Unidirectional Composites," 9^th International Fatigue Congress, 14-19 May 2006, Atlanta, USA.
216. Shokrieh, M. M., and GH. Javadpour "Penetration Analysis of a Projectile in a Ceramic Composite Armor," International Conference on Composite Materials and Nano-Structures (IC2MS-06), Malaysia, 2006.
217. Shokrieh, M. M., and M. Fakhar "Response of Composite Sandwich Panels under Low Velocity Impact with Circularly Clamped Boundary Conditions" International Conference on Composite Materials and Nano-Structures (IC2MS-06), Malaysia, 2006.
218. Shokrieh, M. M., and A. Rezaee Azariani, “Experimental Studies on the Effects of Fire Retardant Additives on Polymeric Composites,” The Tenth National Congress on Iranian Chemical Engineering, in Persian, pp/ 5736-5745, 2005.
219. Shokrieh, M. M., and S. E. Sonbolestan, “Simulation of Mechanical Properties of Clay/Polymer Nano Composites,” 14 Annual International Conference of Mechanical Engineering, 16-18 May, 2006, Esfahan, in Persian.
220. Shokrieh, M. M., and A. R. Ghasemi, “Determining of Interlaminar Stresses for Isotropic and Orthotropic Materials with Central Hole Drilling Method ,” 14 Annual International Conference of Mechanical Engineering, 16-18 May, 2006, Esfahan, in Persian.
221. Shokrieh, M. M., and M. Fakhar, “Effects of Low Velocity Impact on Sandwich Laminated Composites,” 14 Annual International Conference of Mechanical Engineering, 16-18 May, 2006, Esfahan, in Persian.
222. Shokrieh, M. M., and A. Heidari, “Design of Composite Space Structures,” 14 Annual International Conference of Mechanical Engineering, 16-18 May, 2006, Esfahan, in Persian.
223. M. M. Shokrieh, F. Taheri- Behrooz and R. Moslemian, “Repairing Corroded Gas Transmission Pipelines Using Composite Materials,” Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran.
224. Shokrieh, M. M., H. Nosrati and M. Akhbari, “Tensile Strength Studies of Woven Fabric Polyester/ Polyester Composites,” The 8^th Asian Textile Conference, Textile and Modern Sciences, p. 94, Tehran, Iran, May 9-11, 2005.
225. Shokrieh, M. M., and R. Rafiee, “Extraction of Mechanical Properties of Multidirectional Composites using Classical Lamination Theory”, the Fifth Canadian-International Composites Conference in Vancouver, BC, 2005, Canada.
226. Shokrieh, M. M., and M. Rahmat, “Composite Material Reinforcement of Concrete Sleepers under 3-point Bending Conditions,” the IV-th Moscow International Conference, Theory and Practice of technologies of Manufacturing Composite Materials and New Metal Alloys Products (TM, April 26-29, pp. 586-595, 2005.
227. Shokrieh, M. M., and F. Taheri B. and R. Moslemian, “Reinforcement of Corroded Gas Pipes using Composite Materials,” in Persian, 13th annual (international) conference on Mechanical Engineering in Isfahan, Iran, P. 308, 2005.
228. Shokrieh, M. M., and Ghasemi, A. R., “Calibration Factors Determination for Central Hole Drilling Method to Measure Residual Stresses in Isotropic and Orthotropic Materials,” In Persian, 13th annual (international) conference on Mechanical Engineering in Isfahan, Iran, P. 56, 2005.
229. Shokrieh, M. M., and R. Rafiee, “Stochastic fatigue Analysis of a Horizontal Axis Wind Turbine Composite Blade,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 February, 2005, pp. 197-202.
230. Shokrieh, M. M., and A. Najafi, “Damping Characterization of Polymer Matrix Composites Based on Micromechanics Approach, Theory and Experiment,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 February, 2005, pp. 209-214.
231. Najafi A., Shokrieh, M. M., Ghannadpour, S. A. M. and Mohammadi B., “The effect of Circular/Elliptical Cutouts on the Buckling Behavior of Laminated Composites Plates,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 February, 2005, pp. 71-76.
232. Mohammadi, B., Ghannadpour, S. A. M., Shokrieh, M. M., and A. Najafi, “The Post Buckling analysis of Laminated Composites Containing Circular/Elliptical Holes,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 February, 2005, pp. 335-340.
233. Shokrieh, M. M., and Mohammad R. Sareban, “A Method for Internal reinforcement of Concrete with Composite Materials Waste,” Conference on Application of FRP Composites in Construction and Rehabilitation of Structures, pp. 19-29, May 4, 2004, In Persian.
234. Shokrieh, M. M., and Rafiee, R., “Life Prediction of a Composite Horizontal Axis Wind Turbine Blade,” Annual International Mechanical Engineering Conference, Modares Mechanical Engineering, in Persian, pp. 240, 2004.
235. Shokrieh, M. M., and Kamali Shahri, S. M., “Residual stresses in Thermoset Polymer Composites” The Second International Conference on Structural Engineering Mechanics and Computation, 5-7 July 2004, Cape Town,. South Africa, p. 47.
236. Shokrieh, M. M., and A. Rezaee Azariani, “Effect of Flame on the Fiber Reinforced Polymers,” Proceedings of Fire Protections of Buildings, Building and Housing Research Center, Tehran, Iran, pp. 55-66, 2004, In Persian.
237. Shokrieh, M. M., and Jamal Omidi, M., “Reinforcement of Aluminum Cracked Plates Using Carbon/Epoxy Composites,” Second International and Fifth National Conference of Iranian Aerospace Society, 2004, in Persian.
238. Shokrieh, M. M., and Kamali Shahri, S. M., “Study of Classical Method in Determination of Residual stresses in Composite Materials” Aero 2003, The Fourth Iranian Aerospace Society Conference, pp. 382-391, 2003, In Persian.
239. Shokrieh, M. M., and Ali Babaee S., “Design and Manufacturing of Hybrid Composite Belt for a Weaving Machine,” In Persian, Proceedings of the Sixth Conference of Manufacturing and Production Engineering, 2003.
240. Shokrieh, M. M., and Chahardehi A. E., “Reinforcement of Spherical Vessels using Composite Materials,” Proceedings of the Sixth Conference of Manufacturing and Production Engineering, 2003, In Persian.
241. Shokrieh M. M., Taheri Behrooz, F, and Fadaee Arasi, M., “Measurement of Hygro-thermal Properties of Aramid/Epoxy Composite for Cylindrical Specimens and evaluation of Feek Equation,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 1281-1286, 2003, In Persian.
242. Shokrieh M. M., and Seidi, A., “Design of Skid of Bell 214 Helicopter Using Composites,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 1264-1270, 2003, In Persian.
243. Shokrieh M. M., and Zakeri, M., “Evaluation of Fatigue Life of Composite Materials using Progressive Damage Modeling and Stiffness Reduction,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 1256-1263, 2003, In Persian.
244. Shokrieh M. M., and Paryab, N., “Repair and Reinforcement of Gas Pipes using Composite Materials,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 45-52, 2003, In Persian.
245. Shokrieh, M. M., and Hasani, A., “Shear Buckling of Composite Drive Shafts under Torsion,” The Sixth International Conference on Flow Process in Composite Materials (FPCM-6), Auckland, New Zealand, 15-17 July, 2002.
246. Shokrieh, M. M., and Mahmoudi, J., “Shear Creep in Composite Materials,” Proceedings of the 10^th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, pp. 2321-2328, May 25-27, 2002, in Persian.
247. Shokrieh, M. M., and Ghasemi, A., “Aerodynamic Design and Static Analysis of a Composite Wind Turbine Blade” Proceedings of the 10^th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, pp. 2335-2342, in Persian, May 25-27, 2002.
248. Shokrieh, M. M., and Mousavi Malevajerdi S. A., “Study of Bending Behavior of Reinforced Concrete Beams, Strengthened with Glass/Epoxy and Glass /Polyester Composites,” The 1^st Conference & Retrofitting of Structures, in Persian, May 2002.
249. Shokrieh, M. M., and Mozafari, M., “Residual Compressive Strength of Composite Plates under Impact Loading,” Third Canadian International Composites Conference, 21-24 Aug. 2001, Montreal, Quebec, Canada.
250. Shokrieh, M. M., and Rafiee, R., “Structural Design of Composite Transmission Poles,” International Conference on Materials for Advanced Technologies (ICMAT 2001), Singapore, 1-6 July 2001.
251. Shokrieh, M. M., and Rafiee, R., “Design and Analysis of a Composite Transmission Pole,” In Persian, Proceedings of 5^th International & 9^th Annual Mechanical Engineering Conference, Iran, Rasht, Vol. 1, pp. 77-84, 2001.
252. Shokrieh, M. M., Seyed A. Mousavi Malevajerdi, “Strengthening of Reinforced Concrete Beams Using Composite Laminates,” International Conference on FRP Composites in Civil Engineering, Hong Kong, 12-14 Dec. 2001.
253. Shokrieh, M. M., and Seyed A. Mousavi Malevajerdi, “Strengthening of Reinforced Concrete Structures Using Composite Plates,” In Persian, Concrete and Development First International Conference, pp. 235-251, April-May, 2001.
254. Shokrieh, M. M., and Bohlool, A., “Effects of Mechanical Properties of Unidirectional Plies on Stress Analysis of Composite Structures,” ACCM-2000, Second Asian-Australasian Conference on Composite Materials, 18-20 Aug. 2000, Korea, Kyongju, pp.535-542.
255. Shokrieh, M. M., and Haghiri, K., “Effective Parameters on Optimum Design of Composite Pressure Vessels,” ECCM9, Composites - From Fundamentals to Exploitation, The Premier Composites Conference in Europe, 4-7 June 2000, Brighton, England.
256. Shokrieh, M. M., and Mohamadi-Rad H., “The Effect of Internal Liner on Mechanical Behavior of Composite Pressure Vessels,” Proceedings of ICCM-12, 12th International Conference on Composite Materials, France, 1999.
257. Shokrieh, M. M., and Sadrabadi, B. B., “Design of a Composite Telescopic Mast,” First Seminar on Design, Manufacturing, Installation and Protection of Radio and Television Masts, IRIB of Islamic Republic of Iran, pp. 1-6, 1999.
258. Shokrieh, M. M., and Taheri Behrooz, F., “Wing Instability of a Full Composite Aircraft,” Third International Conference on Composite Science and Technology, Sampe-2000, Moscow, Russia, pp. 730-743, 2000.
259. Shokrieh, M. M., Maghsoudi, M., and S. M. Tajali Bakhsh, “ A Study on Adhesive Joints of Laminated Composites,” Sixth Annual Mechanical Engineering Conference and Third International Mechanical Engineering Conference of the Iranian Society of Mechanical Engineers, 18-20 May 1998, In Persian.
260. Shokrieh, M. M., and Lessard, L. B., “Residual Fatigue Life Simulation of Laminated Composites,” International Conference on Advanced Composites 98, Egypt, 1998, pp. 79-86.
261. Shokrieh, M. M., “Fatigue Damage Modeling of Mechanical Joints Made of Composite Materials,” Aviation 2000, International Symposium, Zhukovsky, Moscow, Russia, August 19-24, 1997, pp. 343-351.
262. Shokrieh, M. M., Lessard, L. B., and C. Poon, “Three-Dimensional Progressive Failure Analysis of Pin/Bolt Loaded Composite Laminates,” AGARD Symposium, Meeting on Bolted/Bonded Joints in Polymer Composites Florence, Italy, pp. 7-1 - 7-10, 1996.
263. Shokrieh, M. M, and Lessard, L. B., “Progressive Fatigue Modeling of Laminated Composite Pinned/Bolted Connections,” Proceedings of ICCM-11, 11th International Conference on Composite Materials, Australia, Vol. II: Fatigue, Fracture and Ceramic Matrix Composites, pp. II-156- II-166, 1996.
264. Lessard, L. B., and Shokrieh, M. M., “Overview of Failure in Composite Materials,” Applied Mechanics in Americas, Vol. III, pp. 255-260., Edited by L. A. Godoy, S. R. Idelsohn, and P. A. A. Laura, and D. T. Mook, AAM, and AMCA, Santa Fe, Argentina, 1995, pp. 255-260.
265. Shokrieh, M. M., Eilers, O. P., and Lessard, L. B., “Determination of interlaminar Shear Strength of Graphite/Epoxy Composite Materials in Static and Fatigue Loading,” Proceedings of ICCM-10, 10th International Conference on Composite Materials, Whistler, B. C., Canada, 1995, pp. IV-81 -- IV-88.
266. Milette J. F., Shokrieh M. M. and Lessard L. B., “Static and Fatigue Behaviour of Unidirectional Composites in Compression,” Proceedings of ICCM-10, 10th International Conference on Composite Materials, Whistler, B. C., Canada, 1995, pp. I-617 -- I-624.
267. Shokrieh, M. M., and Lessard, L. B., “Residual Strength and Fatigue Life of Unidirectional Composite Plies under Multiaxial Fatigue Loading,” SAMPE, Atlanta, 1994, pp. 303-314.
268. Shokrieh, M. M., and Lessard, L. B., “Fatigue Behaviour of Composite Pinned / Bolted Joints - New Modeling Approach,” Cancom 93, Ottawa, Canada, (1993), pp. 871-877.
269. Lessard, L. B., Shokrieh, M. M., and Esbensen, J. H., “Analysis of Stress Singularities in Laminated Composite Pinned/Bolted Joints,” 38th SAMPE Symposium and Exhibition, May 10-13, (1993), Anaheim, California, pp. 53-60.
270. Lessard, L. B., Shokrieh, M. M., and Schmit, A. S., “Three Dimensional Stress Analysis of Composite Plates With or Without Stress Concentrations,” 9th International Conference on Composite Materials, 12-16 July, (1993) Madrid, Spain, pp. 243-250.
271. Lessard, L. B., and Shokrieh, M. M., “Failure of Laminated Composite Materials,” International Conference on Engineering Applications of Mechanics, Tehran, Iran, (1992), pp. 475-483.
272. Lessard, L. B., and Shokrieh, M. M., “Pinned Joint Failure Mechanisms, Part I - Two Dimensional Modeling,” First Canadian International Composites Conference and Exhibition, CANCOM 91, Montreal, Canada, (1991), pp. 15D1-15D8.

1. Shokrieh, M. M., “Thermally Conductive Composites for Use in Space,” Post Doctorate Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada, April 1997.
2. Shokrieh, M. M., “Progressive Fatigue Damage Modeling of Composite Materials,” Ph.D. Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada, April 1996.
3. Shokrieh, M. M., “Failure of Laminated Composite Pinned Connections,” Master’s Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada, July 1991.
4. Shokrieh, M. M., “Computer Simulation of the Internal Combustion Engine Crankshaft,” B.Sc. Thesis, Department of Mechanical Engineering, Iran University of Science and Technology, 1984.