School of Mechanical Engineering- Hashemi
Hashemi

Restore images and colors

Full Name: Dr. Ramin Hashemi

Position: Associat Professor

Phone: 98-21-77240540-50     Ex:2996

Fax: 98-21-77240488

Email: rhashemi AT iust.ac.ir

Address: Iran University of Science & Technology, Tehran, IRAN

Education

Ph.D.: Mechanical Engineering, Manufacturing and Production

University of Tehran, Tehran, Iran 

M. Sc.: Mechanical Engineering, Applied Mechanics

Sharif University of Technology, Tehran, Iran 

B. Sc.: Mechanical Engineering, Solid Mechanics

K. N. Toosi University of Technology Tehran, Iran

  

Research interest

  • Applied plasticity and mechanics of metal forming
  • Design and manufacturing
  • Nanotechnology

 Full Publication List at Google Scholar  

 My ORCiD: https://orcid.org/0000-0001-8369-0390 
 
My SCOPUS: https://www.scopus.com/authid/detail.uri?authorId=24341411300
 My Web of Science ResearcherID: H-3122-2017
 

  1. Hedayati, N., & Hashemi, R. (2020). Some practical aspects of digital image correlation technique to evaluate anisotropy coefficient and its comparison with traditional method. Journal of Testing and Evaluation, 48(6).
  2. Hashemi, R., Habibi, M., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2020). Transmit Power Optimization in Optical Coherent Transmission Systems: Analytical, Simulation, and Experimental Results. arXiv preprint arXiv:2002.07626.
  3. Gholami, M. D., Hashemi, R., & Sedighi, M. (2020). The effect of temperature on the mechanical properties and forming limit diagram of aluminum strips fabricated by accumulative roll bonding process. Journal of Materials Research and Technology, 9(2), 1831-1846.
  4. Tayyebi, M., Rahmatabadi, D., Adhami, M., & Hashemi, R. (2020). Manufacturing of high-strength multilayered composite by accumulative roll bonding. Materials Research Express, 6(12), 1265e6.
  5. Kazemi, F., Hashemi, R., & Niknam, S. A. (2020). Formability and fractography of AA5754/polyethylene/AA5754 sandwich composites. Mechanics Based Design of Structures and Machines, 1-15.
  6. Bozcheloei, J. E., Sedighi, M., & Hashemi, R. (2019). The effect of temperature on the mechanical properties and forming limit diagram of Al 5083 produced by equal channel angular rolling. The International Journal of Advanced Manufacturing Technology, 105(10), 4389-4400.
  7. Valinezhad, M., Etemadi, E., Hashemi, R., & Valinezhad, M. (2019). Experimental and FE analysis on spring-back of copper/aluminum layers sheet for a L-die bending process. Materials Research Express, 6(11), 1165h4.
  8. Ghazanfari, A., Soleimani, S. S., Keshavarzzadeh, M., Habibi, M., Assempuor, A., & Hashemi, R. (2019). Prediction of FLD for sheet metal by considering through-thickness shear stresses. Mechanics Based Design of Structures and Machines, 1-18.
  9. Tayyebi, M., Rahmatabadi, D., Adhami, M., & Hashemi, R. (2019). Influence of ARB technique on the microstructural, mechanical and fracture properties of the multilayered Al1050/Al5052 composite reinforced by SiC particles. Journal of Materials Research and Technology, 8(5), 4287-4301.
  10. Rahmatabadi, D., Hashemi, R., Tayyebi, M., & Bayati, A. (2019). Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn. Materials Research Express, 6(9), 096543.
  11. Alipour, M., Torabi, M. A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., ... & Hashemi, R. (2019). Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels. Mechanics Based Design of Structures and Machines, 1-17.
  12. Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572.
  13. Rahmatabadi, D., Shahmirzaloo, A., Hashemi, R., & Farahani, M. (2019). Using digital image correlation for characterizing the elastic and plastic parameters of ultrafine-grained Al 1050 strips fabricated via accumulative roll bonding process. Materials Research Express, 6(8), 086542.
  14. Kasaeian-Naeini, M., Hashemi, R., & Hosseini, A. (2019). Lubrication performance of rapeseed oil-based nano-lubricants in parallel tubular channel angular pressing process. Journal of Central South University, 26(5), 1042-1049.
  15. Googarchin, H. S., Teimouri, B., & Hashemi, R. (2019). Analysis of constrained groove pressing and constrained groove pressing-cross route process on AA5052 sheet for automotive body structure applications. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(6), 1436-1452.
  16. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., Tayyebi, M., & Hashemi, R. (2019). Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC. Materials Science and Engineering: A, 753, 70-78.
  17. Pahlavani, M., Marzbanrad, J., Rahmatabadi, D., Hashemi, R., & Bayati, A. (2019). A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM. Materials Research Express, 6(7), 076554.
  18. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., Tayyebi, M., & Hashemi, R. (2019). Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC. Materials Science and Engineering: A, 753, 70-78.
  19. Hadiyan, B., Hashemi, R., & Akbari, H. (2019). Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification. Journal of Advanced Materials and Processing, 7(1), 22-30.
  20. Ebrahimi Keshmarzi, H., Hashemi, R., & Madoliat, R. (2019). Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis. ADMT Journal, 12(1), 51-58.
  21. Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., & Hashemi, R. (2019). Characterization of the Plastic and Elastic Properties of Aluminum Sheet Produced by CRB Process via DIC Method. Modares Mechanical Engineering, 19(2), 505-513.
  22. Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). 旋切钛基复合材料 (Ti-MMC) 的超细微粒粉尘排放 (英文). Journal of Central South University, (6), 19.
  23. Najafizadeh, N., Rajabi, M., Hashemi, R., & Amini, S. (2019). Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming. Journal of Theoretical and Applied Vibration and Acoustics, 5(1), 1-10.
  24. Saberi, M., Niknam, S. A., & Hashemi, R. (2019). On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment.
  25. Motamedi, M. A., & Hashemi, R. (2019). Evaluation of Temperature Effects on Forming Limit Diagrams of AA6061-T6 Considering the Marciniak and Kuczynski Model. Journal of Testing and Evaluation, 49(2).
  26. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2019).Experimental evaluation of the plane stress fracture toughness for ultra-fine grained Al/Al specimens prepared by accumulative roll bonding process.
  27. Kasaeian-Naeini, M., Hashemi, R., & Hosseini, A. (2019). Lubrication performance of rapeseed oil-based nano-lubricants in parallel tubular channel angular pressing process. Journal of Central South University, 26(5), 1042-1049.
  28. Rahmatabadi, D., Hashemi, R., Tayyebi, M., & Bayati, A. (2019). Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn. Materials Research Express, 6(9), 096543.
  29. Ebrahimi Keshmarzi, H., Hashemi, R., & Madoliat, R. (2019). Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis. ADMT Journal, 12(1), 51-58.
  30. Mousavi, F., Erfanian, M., Hashemi, R., & Madoliat, R. (2018). Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets. Journal of Advanced Materials and Processing, 6(3), 66-79.
  31. Fallah Tafti, M., Sedighi, M., & Hashemi, R. (2018). Effects of Natural Aging Treatment on Mechanical, Microstructural and Forming Properties of Al 2024 Aluminum Alloy Sheets. Iranian Journal of Materials Science and Engineering, 15(4), 1-10.
  32. Rahmatabadi, D., Pahlavani, M., Bayati, A., Hashemi, R., & Marzbanrad, J. (2018). Evaluation of fracture toughness and rupture energy absorption capacity of as-rolled LZ71 and LZ91 Mg alloy sheet. Materials Research Express, 6(3), 036517.
  33. Erfanian, M., & Hashemi, R. (2018). A comparative study of the extended forming limit diagrams considering strain path, through-thickness normal and shear stress. International Journal of Mechanical Sciences, 148, 316-326.
  34. Rahmatabadi, D., Mohammadi, B., Hashemi, R., & Shojaee, T. (2018). An experimental study of fracture toughness for nano/ultrafine grained Al5052/Cu multilayered composite processed by accumulative roll bonding. Journal of Manufacturing Science and Engineering, 140(10).
  35. Rahmatabadi, D., Tayyebi, M., Sheikhi, A., & Hashemi, R. (2018). Fracture toughness investigation of Al1050/Cu/MgAZ31ZB multi-layered composite produced by accumulative roll bonding process. Materials Science and Engineering: A, 734, 427-436.
  36. Bostan Shirin, M., Hashemi, R., & Assempour, A. (2018). Analysis of deep drawing process to predict the forming severity considering inverse finite element and extended strain-based forming limit diagram. Journal of Computational & Applied Research in Mechanical Engineering (JCARME), 8(1), 39-48.
  37. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R., & Assempour, A. (2018). Forming limit diagrams by including the M–K model in finite element simulation considering the effect of bending. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636.
  38. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Faraji, G. (2018). Evaluation of microstructure and mechanical properties of Al5052/Cu multi-layered composite fabricated by the ARB process. Powder Metall. Met. Ceram.
  39. Mousavi, F., Hashemi, R., & Madoliat, R. (2018). Measurement of directional anisotropy coefficients for AA7020-T6 tubes and prediction of forming limit curve. The International Journal of Advanced Manufacturing Technology, 96(1-4), 1015-1023.
  40. Hashemi, R., & Karajibani, E. (2018). Forming limit diagram of Al-Cu two-layer metallic sheets considering the Marciniak and Kuczynski theory. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(5), 848-854.
  41. Nasiri, S. M., Basti, A., Hashemi, R., & Darvizeh, A. (2018). Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria. International Journal of Mechanical Sciences, 137, 15-23.
  42. Habibi, M., Hashemi, R., Tafti, M. F., & Assempour, A. (2018). Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. Journal of Manufacturing Processes, 31, 310-323.
  43. Tayyebi, M., Rahmatabadi, D., Rashidi, R., & Hashemi, R. (2018). Evaluation of mechanical properties and microstructure for Al/Ni% 5 produced by cross accumulative roll bonding process.
  44. Abdollahi, B. S. B., Esmaeili, B. M., Afzali, D., & Hashemi, R. (2018). Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater.
  45. Mousavi, F., Erfanian, M., Hashemi, R., & Madoliat, R. (2018). Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets. Journal of Advanced Materials and Processing, 6(3), 66-79.
  46. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Faraji, G. (2018). Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces. International Journal of Minerals, Metallurgy, and Materials, 25(5), 564-572.
  47. Rahimi, H. R., Sedighi, M., & Hashemi, R. (2018). Forming limit diagrams of fine-grained Al 5083 produced by equal channel angular rolling process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(11), 922-930.
  48. Habibi, M., Hashemi, R., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2018, December). Comparing Nonlinearity Effects of SMF and NZ-DSF fibers on the Performance of Optical Coherent Transmission Systems. In 2018 Fifth International Conference on Millimeter-Wave and Terahertz Technologies (MMWaTT) (pp. 54-57). IEEE.
  49. Hashemi, R., Habibi, M., Beyranvand, H., Emami, A., Hashemi, M., & Rafie, D. R. (2018, December). Power Allocation in Optical Coherent Transmission Systems Using Discretized-Enhanced Gaussian Noise Model. In 2018 9th International Symposium on Telecommunications (IST) (pp. 342-347). IEEE.
  50. Abdollahi, B. S. B., Esmaeili, B. M., Afzali, D., & Hashemi, R. (2018). Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater.
  51. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experimental evaluation of the plane stress fracture toughness for ultra-fine grained aluminum specimens prepared by accumulative roll bonding process. Materials Science and Engineering: A, 708, 301-310.
  52. Hashemi, R. (2017). Survey the effect of forming speed on fld for Al 6061 sheets. Modares Mechanical Engineering, 17(10), 333-340.
  53. Javidikia, M., & Hashemi, R. (2017). Mechanical anisotropy in ultra-fine grained aluminium tubes processed by parallel-tubular-channel angular pressing. Materials Science and Technology, 33(18), 2265-2273.
  54. Rahmatabadi, D., & Hashemi, R. (2017). Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding. International Journal of Materials Research, 108(12), 1036-1044.
  55. Javidikia, M., & Hashemi, R. (2017). Analysis and simulation of parallel tubular channel angular pressing of Al 5083 tube. Transactions of the Indian Institute of Metals, 70(10), 2547-2553.
  56. Rahmatabadi, D., Tayyebi, M., Hashemi, R., & Eghbali, B. (2017). Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process. Modares Mechanical Engineering, 17(7), 180-184.
  57. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process. Modares Mechanical Engineering, 17(2), 101-108.
  58. Karajibani, E., Hashemi, R., & Sedighi, M. (2017). Forming limit diagram of aluminum-copper two-layer sheets: Numerical simulations and experimental verifications. The International Journal of Advanced Manufacturing Technology90(9-12), 2713-2722.
  59. Rahmatabadi, D., & Hashemi, R. (2017). Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test. Modares Mechanical Engineering, 17(3), 451-454.
  60. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process. Modares Mechanical Engineering17(2), 101-108.
  61. Marandi, F. A., Jabbari, A. H., Sedighi, M., & Hashemi, R. (2017). An Experimental, analytical, and numerical investigation of hydraulic bulge test in two-layer Al–Cu Sheets. Journal of Manufacturing Science and Engineering139(3).
  62. Afshar, A., Hashemi, R., Madoliat, R., Rahmatabadi, D., & Hadiyan, B. (2017). Numerical and experimental study of bursting prediction in tube hydroforming of Al 7020-T6. Mechanics & Industry, 18(4), 411.
  63. Hedayati, N., Madoliat, R., & Hashemi, R. (2017). Strain measurement and determining coefficient of plastic anisotropy using digital image correlation (DIC). Mechanics & Industry18(3), 311.
  64. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R., & Hashemi, R. (2017). Determination of forming limit diagram using two modified finite element models. Mech Eng48(4), 141-144.
  65. Rahmatabadi, D., Hashemi, R., Mohammadi, B., & Shojaee, T. (2017). Experimental evaluation of the plane stress fracture toughness for ultra-fine grained.
  66. Rahmatabadi, D., & Hashemi, R. (2016). Experimental investigation of fracture surfaces and mechanical properties of AA1050 aluminum produced by accumulative roll bonding process. Modares Mechanical Engineering, 16(10), 305-312.
  67. Karajibani, E., Hashemi, R., & Sedighi, M. (2016). Determination of forming limit curve in two-layer metallic sheets using the finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(6), 1018-1029.
  68. Mirfalah-Nasiri, S. M., Basti, A., & Hashemi, R. (2016). Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate. International Journal of Mechanical Sciences, 117, 93-101.
  69. Tayebi, M., Moghadasi, H., Rahmatabadi, D., Mohemi, E., & Hashemi, R. (2016). Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study. Journal of Modern Processes in Manufacturing and Production, 5(3), 13-21.
  70. Hashemi, R., Madoliat, R., & Afshar, A. (2016). Prediction of forming limit diagrams using the modified MK method in hydroforming of aluminum tubes. International Journal of Material Forming9(3), 297-303.
  71. Rahimi, H. R., Sedighi, M., & Hashemi, R. (2018). Forming limit diagrams of fine-grained Al 5083 produced by equal channel angular rolling process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications232(11), 922-930.
  72. Ghazanfari, A., Assempour, A., Habibi, M., & Hashemi, R. (2016). Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak–Kuczynski model. Modares Mechanical Engineering, 16(1), 137-143.
  73. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A., & Lashini, H. (2016). Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures. Journal of Materials Engineering and Performance25(2), 382-389.
  74. Hashemi, R., Abrinia, K., Assempour, A., Khakpour Nejadkhaki, H., & Shahbazi Mastanabad, A. (2016). Forming limit diagram of tubular hydroformed parts considering the through-thickness compressive normal stress. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications230(1), 332-343.
  75. Karajibani, E., Hashemi, R., & Sedighi, M. (2016). Experimental determination of forming limit diagram in Aluminum-Copper twolayer metallic sheets. Science and Technology of Composites, 2(4), 45-50.2015.
  76. Abdolvand, H., Faraji, G., Givi, M. B., Hashemi, R., & Riazat, M. (2015). Evaluation of the microstructure and mechanical properties of the ultrafine grained thin-walled tubes processed by severe plastic deformation. Metals and Materials International21(6), 1068-1073.
  77. Mirfalah Nasiri, S. M., Basti, A., & Hashemi, R. (2015). Numerical analysis of the effect of advanced yield criterion on prediction of strains and stresses in anisotropic aluminum sheets. Modares mechanical engineering, 15(8), 393-401.
  78. Hashemi, R., Yousefi, S., & Faraji, M. (2015). Experimental studying of the effect of active area on the performance of passive direct methanol fuel cell. Ionics21(10), 2851-2862.
  79. Karajibani, E., Fazli, A., & Hashemi, R. (2015). Numerical and experimental study of formability in deep drawing of two-layer metallic sheets. The International Journal of Advanced Manufacturing Technology, 80(1-4), 113-121.
  80. Hashemi, R., Abrinia, K., & Faraji, G. (2015). A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science229(9), 1537-1547.
  81. Hashemi, R., Jalili, I., & Abdolmohammadi, M. (2015). Experimental test and finite element analysis of line heating method for forming of ship hull steel plates. Modares Mechanical Engineering, 14(16), 9-16.
  82. Marandi, F. A., Jabbari, A. H., Sedighi, M., & Hashemi, R. (2015). Analytical and numerical investigation of Bulge test in bimetallic sheets.
  83. Zhalehfar, F., Hashemi, R., & Hosseinipour, S. J. (2015). Experimental and theoretical investigation of strain path change effect on forming limit diagram of AA5083. The International Journal of Advanced Manufacturing Technology, 76(5-8), 1343-1352.
  84. Karajibani, E., Hashemi, R., & Sedighi, M. (2015). A Novel Methodology to Determination of Forming Limit Curve in Two-Layer Metallic Sheets Based on Numerical Models.
  85. Karajibani, E., Hashemi, R., & Fazli, A. (2015). An Analysis of the Formability of Two-Layer Metallic Sheets by the Experiment and Finite Element Method.
  86. Khakpour, H., Hashemi, R., & Assempour, A. (2015). Prediction of Noral Stress Effect on Forming Limit Diagrams.
  87. Zendehboudi, A. R., & Hashemi, R. (2015). Fabrication and experimental study of regeneration temperature, rotational speed and inlet air humidity on the performance of a desiccant wheel. Iranian Journal of Science and Technology Transactions of Mechanical Engineering39(M2), 451-458.
  88. Haj Hosseini, M., & Hashemi, R. A. M. I. N. (2016). Addicts' quality of life and psychological disorders (depression, anxiety, and stress) in two treatment methods: narcotics anonymous vs. methadone maintenance treatment. Research on addiction, 9(35), 119-136.
  89. Hashemi, R., Mamusi, H., & Masoumi, A. (2014). A simulation-based approach to the determination of forming limit diagrams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(12), 1582-1591.
  90. Hashemi, R., & Abrinia, K. (2014). Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress. Materials & Design (1980-2015), 54, 670-677.
  91. Hashemi, R. (2014). Analysis of necking in tube hydroforming by means of extended forming limit stress diagram. Engineering Solid Mechanics2(2), 73-82.
  92. Borazjani, M. S., Bamdad, M., & Hashemi, R. (2014). Numerical investigation on the single phase forced convection heat transfer characteristics of Al2o3 nanofluids in a double-tube counter flow heat exchanger. International Journal of Basic Sciences and Applied Research, 3, 266-273.
  93. Mamusi, H., Masoumi, A., Hashemi, R., & Mahdavinejad, R. (2013). A novel approach to the determination of forming limit diagrams for tailor-welded blanks. Journal of Materials Engineering and Performance, 22(11), 3210-3221.
  94. Hashemi, R., Ghazanfari, A., Abrinia, K., & Assempour, A. (2013). The Effect of the Imposed Boundary Rate on the Formability of Strain Rate Sensitive Sheets Using the M-K Method. Journal of Materials Engineering and Performance22(9), 2522-2527.
  95. Hashemi, R., Abrinia, K., & Assempour, A. (2013). The strain gradient approach to predict necking in tube hydroforming. Journal of Manufacturing Processes, 15(1), 51-55.
  96. Abad, M. K. (2013). Loading Path Determination for Tube Hydroforming Process of Automotive Component Using APDL. International Journal of Automotive Engineering3(4), 555-563.
  97. Hashemi, R., Ghazanfari, A., Abrinia, K., & Assempour, A. (2012). Forming limit diagrams of ground St14 steel sheets with different thicknesses. SAE International Journal of Materials and Manufacturing, 5(1), 60-64.
  98. Jamali, G., Raeesi, R., Hashemi, R. (20011). Identifying key success factors in strategic management of supply chain and the interrelations of these factors. In 2011 2nd IEEE International Conference on Emergency Management and Management Sciences.
  99. Valinezhada, M., Etemadia, E., Hashemi, R., & Valinezhadc, M. (2011). Experimental and FE analysis on spring-back of copper/aluminum. Journal of Advanced Manufacturing Technology, 54(1-4), 93-111.
  100. Faraji, G., Mashhadi, M. M., & Hashemi, R. (2010). Using the finite element method for achieving an extra high limiting drawing ratio (LDR) of 9 for cylindrical components. CIRP Journal of Manufacturing Science and Technology, 3(4), 262-267.
  101. Faraji, G. H., Hashemi, R., Mashhadi, M. M., Dizaji, A. F., & Norouzifard, V. (2010). Hydroforming limits in metal bellows forming process. Materials and Manufacturing Processes25(12), 1413-1417.
  102. Assempour, A., Nejadkhaki, H. K., & Hashemi, R. (2010). Forming limit diagrams with the existence of through-thickness normal stress. Computational Materials Science, 48(3), 504-508.
  103. Hashemi, R., Faraji, G., Abrinia, K., & Dizaji, A. F. (2010). Application of the hydroforming strain-and stress-limit diagrams to predict necking in metal bellows forming process. The International Journal of Advanced Manufacturing Technology, 46(5-8), 551-561.
  104. Hashemi, R., Assempour, A., & Abad, E. M. K. (2009). Implementation of the forming limit stress diagram to obtain suitable load path in tube hydroforming considering M–K model. Materials & Design, 30(9), 3545-3553.
  105. Assempour, A., & Hashemi, R. (2009). Finding the optimum Hill index in the determination of the forming limit diagram. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture223(7), 943-944.
  106. Assempour, A., Hashemi, R., Abrinia, K., Ganjiani, M., & Masoumi, E. (2009). A methodology for prediction of forming limit stress diagrams considering the strain path effect. Computational materials science45(2), 195-204.
  107. Safikhani, A. R., Hashemi, R., & Assempour, A. (2009). Some numerical aspects of necking solution in prediction of sheet metal forming limits by strain gradient plasticity. Materials & Design30(3), 727-740.
  108. Assempour, A., Safikhani, A. R., & Hashemi, R. (2009). An improved strain gradient approach for determination of deformation localization and forming limit diagrams. Journal of materials processing technology209(4), 1758-1769.
  109. Safikhani, A. R., Hashemi, R., & Assempour, A. (2008). The strain gradient approach for determination of forming limit stress and strain diagrams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(4), 467-483.

Topic URL in School of Mechanical Engineering website:
http://idea.iust.ac.ir/find-16.13721.31661.en.html
Back to content primary page