Education

• Ph.D.,Studied for 3.5 years at Imperial College of London , U.K. (The Viva examination held at Amirkabir University of technology,Iran Jun 1989)
• M.Sc., Imperial College of London , U.K.
• B.Sc., Queen Mary College , U.K.

Current Research

• Satellite Structural Design and Analysis
• Long-Rod Penetration
• Investigation of Sound Transmission through Orthotropic Cylindrical Shells
• Structure of Electromagnetic Launchers
• Random Vibration Analysis

Fields of Interest

Publications:

I. Published Journal Papers

1. Bakhtiari, M., Daneshjou, K.,  Fakoor, M., “Long-Term Effects of Main-body’s Obliquity on Satellite Formation Perturbed by Third-Body Gravity in Elliptical and Inclined Orbit”,  Research in Astronomy and Astrophysics , Vol. 17, Issue. 4, pp. 39-59, 2017
2. Bakhtiari, M., Daneshjou, K., Abbasali, E., “A new approach to derive a formation flying model in the presence of a perturbing body in inclined elliptical orbit: relative hovering analysis configuration”, Astrophysics and Space Science, Vol. 362, Issue. 36, pp. 1-15, 2017
3. Daneshjou, K., Talebitooti, R., Kornokar, M., “Vibroacoustic study on a multilayered functionally graded cylindrical shell with poroelastic core and bonded-unbonded configuration”, Journal of Sound and Vibration, Vol. 393, Issue. 1, pp. 157-175, 2017
4. Daneshjou, K., Bakhtiari, M., Tarkashvand, A., “Wave propagation and transient response of a fluid-filled FGM cylinder with rigid core using the inverse Laplace transform”, European Journal of Mechanics A/Solids, Vol. 61, Issue. 1, pp. 420-432, 2017
5. Daneshjou, K., Talebitooti, R., Tarkashvand, A., “An exact solution of three-dimensional elasticity for sound transmission loss through FG cylinder in presence of subsonic external flow”, International Journal of Mechanical Sciences, Vol. 120, Issue. 1, pp. 105-119, 2017
6. Bakhtiari, M., Daneshjou, K., Alibakhshi, R., “A New Approach to Thermal Analysis of a Multilayered Cylindrical Structure with Imperfect Bonds and Internal Heat Source”,  Journal of Heat Transfer, Vol. 138, Issue. 12, 2016
7. Daneshjou, K., Talebitooti, R., Tarkashvand, A., “Investigation on Sound Transmission through Thick-Wall Cylindrical Shells using 3D- Theory of Elasticity in the Presence of External and Mean Air-Gap Flow”,  Journal of Vibration and Control, Pages: 1077546316655723, 2016
8. Daneshjou, K., Talebitooti, R., Tarkashvand, A., “Analysis of sound transmission loss through thick-walled cylindrical shell using three-dimensional elasticity theory source”,  International Journal of Mechanical Sciences, Vol. 106, Issue 1, pp. 286-296, 2016
9. Daneshjou, K., Bakhtiari, M.,  Parsania, H.,  Fakoor, M., “Non-Fourier heat conduction analysis of infinite 2D orthotropic FG hollow cylinders subjected to time-dependent heat source”,  Applied Thermal Engineering, Vol. 98, Issue 1, pp. 582-590, 2016
10. Talebitooti, R., Daneshjou, K., Kornokar, M., “Three dimensional sound transmission through poroelastic cylindrical shells in the presence ofsubsonic flow”,  Journal of Sound and Vibration, Vol. 363, Issue 1, pp. 380-406, 2016
11. Talebitooti, R., Daneshjou, K., Jafari, S.A.M., Alibakhshi, R., Fakoor, M., “Optimal control of laminated plate integrated with piezoelectric sensor and actuator considering TSDT and meshfree method”,  European Journal of Mechanics - A/Solids Rockets , Vol. 55, Issue 1, pp. 199-211, 2016
12. Daneshjou, K., Bakhtiari, M., Alibakhshi, R., Fakoor, M., “Transient Thermal Analysis in 2D Orthotropic FG Hollow Cylinder with Heat Source”, International Journal of Heat and Mass Transfer , Vol. 89, Issue 1, pp. 977-984, 2015
13. Mansourinejad, H., Sharavi, M., Daneshjou, K., “Design and Analysis of Oscillation-Decreasing Mechanism on the Deployable Composite Boom Source”,  Journal of Spacecraft and Rockets , Vol. 52, Issue 4, pp. 1091-1100, 2015
14. Daneshjou, Talebitooti, M., “Free Vibration Analysis of Rotating Stiffened Composite Cylindrical Shells by using the Layerwise-Differential Quadrature (LW-DQ) Method”, Mechanics of Composite Materials, Vol. 50, Issue 1, pp. 21-38, 2014.
15. Talebitooti, M., Daneshjou, K., Talebitooti, R., “Vibration and Critical Speed of Orthogonally Stiffened Rotating FG Cylindrical Shell under Thermo-mechanical Loads Using Differential Quadrature Method”, Journal of Thermal Stresses, Vol. 36, Issue 2, pp. 160-188, 2013.
16. Daneshjou, K., Talebitooti, M., Talebitooti, R., “Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method”, Applied Mathematics and Mechanics, Vol. 34, Issue 4, pp. 437-456, 2013.
17. Daneshjou, K.,  Talebitooti, M.,  Talebitooti, R., Saeidi Googarchin, H., “Dynamic Analysis and critical speed of rotating laminated conical shells with orthogonal stiffeners using generalized differential quadrature method”, Latin American Journal of Solids and Structures, vol.10, No.2,  2013.
18. Daneshjou, K., Madoliat, R., Talebitooti, M., “THREE-DIMENSIONAL VIBRATION ANALYSIS AND CRITICAL SPEED OF ROTATING ORTHOGONALLY STIFFENED LAMINATED CYLINDRICAL SHELLS UNDER AXIAL LOAD AND PRESSURE”, MODARES MECHANICAL ENGINEERING, Vol. 12 , No. 6, pp. 80-94, In Persian, 2013.
19. Daneshjou, K., Ramezani, H., Talebitooti, R., “Wave transmission through laminated composite double-walled cylindrical shell lined with porous materials”, Applied Mathematics and Mechanics, Vol. 32, Issue 6, pp. 701-718, 2011.
20. Babaei, B.,  Shokrieh, M. M., Daneshjou, K., “The ballistic resistance of multi-layered targets impacted by rigid projectiles”, Materials Science and Engineering: A, Vol. 530, pp. 208–217, 2011.
21. Daneshjou, K., Shokrieh, M. M.,  Ghorbani Moghaddam, M., Talebitooti, R., “Analytical model of sound transmission through relatively thick FGM cylindrical shells considering third order shear deformation theory”, Composite Structures, Vol. 93, Issue 1, pp. 67–78, 2010.
22. Daneshjou, K., Nouri, A., Talebitooti, R., “Analytical model of sound transmission through orthotropic cylindrical shells with subsonic external flow”, Vol. 13, Issue 1, pp. 18–26, 2009.
23. Daneshjou, K., Talebitooti, R., Nouri, A., “Investigation model of sound transmission through orthotropic cylindrical shells with subsonic external flow”, Aerospace Science and Technology, Vol. 13, pp. 18-26, 2009.
24. Daneshjou, K., Talebitooti, R., Nouri, A., “Acoustic Transmission Through Cylindrical Shells Treated with FLD Mechanisms”, Journal of Mechanics, Vol. 25, No. 3, pp. 299-306, 2009.
25. Daneshjou, K., Nouri, A., Talebitooti, R., “Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation”, Applied Mathematics and Mechanics, Vol. 29, Issue 9, pp. 1165-1177, 2008.
26. Daneshjou, K., Talebitooti, R., Nouri, A., “Analytical model of sound transmission through orthotropic  double walled cylindrical shells”, Transactions of the CSME /de la SCGM, Vol. 32, No.1, 2008.
27. Daneshjou, K., Shahravi, M., “The Role of Simulation in Long-rod Ricochet Phenomenon”, Mech. & Aerospace Eng. J., Vol. 3, No. 4, pp. 69-86, 2008.
28. Daneshjou, K., Fakoor, M., “Efficient Algorithm for Reliability Analysis of Structures under Random Vibration”, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 11, pp. 1293-1304, 2007.
29. Daneshjou, K.,  Nouri, A.,  Talebitooti, R., “Sound transmission through laminated composite cylindrical shells using analytical model”, Archive of Applied Mechanics, Vol. 77, Issue 6, pp. 363-379, 2007.
30. Daneshjou, K., Shahravi, M., Rahimzadeh, M., “Comparative Study of Nose Profile Role in Long-Rod Penetration”, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 5, pp. 635-643, 2007. 
31. Daneshjou, K.,  Talebitooti, M.,  Talebitooti, R., “Vibration and Critical Speed of Axially loaded Rotating Orthotropic Cylindrical Shells”, Journal of Aerospace Science and Technology (JAST), Vol. 4, No. 3, pp. 37-43, 2007.
32. Daneshjou, K., Nouri, A., Talebitooti, R., “SOUND TRANSMISSION THROUGH LAMINATED COMPOSITE CYLINDRICAL SHELLS, CONSIDERING TRANSVERSE SHEAR DEFORMATION”, Mech. & Aerospace Eng. J., Vol. 2 , No. 2, pp. 71-84, 2006.
33. Daneshjou, K., Kochakinejad, A. , Rahimzadeh, M., “Numerical study of long rods penetration depth in semiinfinite targets in electromagnetic launchers”, IEEE Transactions on Magnetics, Vol. 41, No. 1, pp. 375-379, 2005.
34. Dehghan Nayeri, M. R., Alasty, A., Daneshjou, K., “Neural optimal control of flexible spacecraft slew maneuver”, Acta Astronautica, Vol. 55, Issue 10, pp. 817–827, 2004.
35. Zamani, A., Daneshjou, K., Tak, A. A. J., “Estimating the incidence of neonatal hearing loss in high risk neonates”, Acta Medica Iranica, Vol. 42(3), pp. 176-180, 2004.
36. Daneshjou, K., Ramezani, M., “Classical coupled thermoelasticity in laminated composite plates based on third-order shear deformation theory”, COMPOSITE STRUCTURES, Vol. 64 , No. 3-4, pp. 369-375, 2004.
37. Daneshjou, K., Ramezani, M., “COUPLED THERMOELASTICITY IN LAMINATED COMPOSITE PLATES BASED ON GREEN–LINDSAY MODEL”, COMPOSITE STRUCTURES,  Vol. 55 , No. 4, pp. 387-392, 2002.
38. Daneshjou, K., Alasti,  A., Rezaei, Sh., “ATTITUDE CONTROL SYSTEM OF Z-SAT”, IRANIAN JOURNAL OF MECHANICAL ENGINEERING (ENGLISH), Vol. 2, No. 1, pp. 1-13, 2001.
39. Daneshjou, K., Alasti,  A., Rezaei, Sh., “EFFECT OF POINT MASS DAMPER ON SATELLITE STABILITY REGIONS”, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 12, No. 2, pp. 177-188, 2001.

II. Conference Papers

• “Analysis of Viscoelastic Boundary Conditions on Vibration of a Beam”, 13th International Mechanical Engineering Conference, May 2005.
• “Sound Transmission Analysis from Cylindrical Isotropic Shells with Infinite Length”, 13th International Mechanical Engineering Conference, May 2005.
• “Calculation of RMS Von-Mises Stress in Structures Under Random Vibration Using SVD Method”, 13th International Mechanical Engineering Conference, May 2005.
• “An Efficient Algorithm for Failure Analysis of Mechanical Structures under Random Loading”, 12th International Mechanical Engineering Conference, May 2004.
• “Estimation of Propulsion System Acoustic Loads”, 12th International Mechanical Engineering Conference, May 2004.
• “Computation of Von-Mises Stress Distribution on Structures Under Random Loading Using Monte Carlo Simulation”, 12th International Mechanical Engineering Conference, May 2004.
• “Flexible Satellite Simulator Design”, 12th International Mechanical Engineering Conference, May 2004.
• “Structural Design and Modeling of an Electromagnetic Launcher”, 11th International Mechanical Engineering Conference, May 2003.
• “Simulation and frequency Response Calculation of a Space Structure due to Random Vibration”, 11th International Mechanical Engineering Conference, May 2003.
• “Conceptual Design of Attitude Control Simulators for Rigid and Flexible Satellites”, Second Aero Space Industries Conference, Jan 2004.
• “Conceptual Design of Solar Array Mechanism”, Second Aero Space Industries Conference, Dec 2004.
• “Design of Satellite’s Acoustic Test Room”, Second Aero Space Industries Conference, Dec 2004.
• “Random Vibration Analysis of a Small Satellite”, Second Aero Space Industries Conference, Dec 2004.
• “Design and Fabrication of E-Glass / Silicone Composite With Elastic Properties, Using in Expandable and Retractable Space Structures”, 6th Iranian Metallurgy Conference, Nov 2002.
• “Study of Al 2024 Thermomechanical Aging and it’s affects on Satellite Structural Weight”, First Metal Forming Conference, May 2002.
• “Mathematical Model for Natural Frequencies of a Satellite Structure”, Iranian Aero Space Conference, May 2002.
• “Physical - Mechanical Property Optimization of Tungsten - Copper Composites for Using in the Structure of a Railgun E.M.L.”, 10th International Mechanical Engineering Conference, May 2002.
• “Design of Coil-able control Boom with Simple Mechanical Structure”, 10th International Mechanical Engineering Conference, May 2002.
• “Dynamic and Shock Analysis of a Satellite Structure”, 10th International Mechanical Engineering Conference, May 2002.
• “Study of Thermomechanical Aging in Tensile Properties of Al 2024”, 5th Iranian Metallurgy Conference, Nov 2001.
• “Study of Infiltration Process in Optimizing the Tungsten - Copper Composite”, 5th Iranian Metallurgy Conference, Nov 2001.
• “Design and Optimization of a Satellite Stabilization”, 9th International Mechanical Engineering Conference, May 2001.
• “Design and Static Analysis of an EML Structure with F.E. Method”, 9th International Mechanical Engineering Conference, May 2001.
• “Integration of Satellite Stabilization Control System”, First Iranian International Aero Space Conference, Jan 2001.
• “Design of Control Boom in Gravity Gradient Stabilization”, 8th International Mechanical Engineering Conference, May 2001.
• “Analytical Model of Sound Transmission through Orthotropic Cylindrical Shells”, 13th Annual (International) Mechanical Engineering Conference May 2005 Isfahan University of Technology. Isfahan, Iran.
• “Developing an Efficient Method in Small Satellite’s System Integration in the Phase of Conceptual Design”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
• “Design, Analysis and Modeling of an Electromagnetic Launcher (HPEL)”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
• “Reliability and Failure Analysis of a Small Satellite under Random Loading”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
• “Effect of Spin Stabilized Attitude Control System on Small Satellite’s Configuration in the Conceptual Design Phase”, International Aerospace Conference, Feb 2004.
• “Structural analysis of Space Vehicle using Tresca Stress Criterion in Random Vibration Environment”, International Aerospace Conference, Feb 2004.
• “Tribological Problems in Space Mechanisms”, International Aerospace Conference, Feb 2004.
• “Formulization of Satellite Structure Conceptual Design”, 11th International Mechanical Engineering conference, May 2003.
• “Design, Fabrication and Testing of a Coil-able Control Boom in Scaled Laboratory Model for a Small Satellite”, International Aerospace Conference, Feb 2003.
• “Design and Analysis of Z-SAT Control System”, 10th International Mechanical Engineering conference, May 2002.
• “FARAGAM Algorithm in Satellite Layout”, the 6th APC-MCSTA, Sep 2001.
• “Design and Analysis of ZS3-SAT Structure”, 9th International Mechanical Engineering conference, May 2001.
• “Satellite Simultaneous Attitude Orbit Determination via Kalman Filtering of Magnetometer Data”, 9th International Mechanical Engineering conference, May 2001.
• “Effects of Orbital Perturbation on Trajectory of the L.E.O Satellite”, International Aerospace conference, Dec 2000.
• “Dynamic Modeling and Stability Analysis of Z-SAT”, AIAA Modeling and Simulation Conference, August 2000.
• “Control Boom Design of Z-SAT”, AIAA Modeling and Simulation Conference, August 2000.
• “Structural Design of Z Satellite”, 5th APC-MCSTA, 1999.

Publications - Others

• An Introduction to Satellite Design
• Dynamic of Satellite attitude
• Satellite Design: Structures and Mechanisms
• New Methods in Finite Element Analysis

Courses Taught

• Design of Airplane Structure
• Mechanical Vibrations
• Mechanics of Material
• Statics

• Design of Advanced Space Structures
• Finite Element Method