Personal Details                                                                                              NAME: Saeed   SURNAME: Shabestari ACCADEMIC STATUS: Professor in IUST Fields of Research Interests: Casting, Solidification, Heat Treatment, Physical Metallurgy.
Contact Address School of Metallurgy & Materials Engineering Iran University of Science and Technology (IUST), Narmak, Tehran, Iran Tel: +9821-7724540-550 , Ext: 2815 Fax: +9821-77240480 E-mail: Shabestari@iust.ac.ir
Publications S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, K. Hazeli, M.J. Torkamany, "Effect of Re-scanning on Tribological Characterization of Laser Surface Alloyed Layers", Materials and Design, 2010, in press, (ISI Cited) V. Abouei, H. Saghafian, S.G. Shabestari, M. Zarghami, "Effect of Fe-Rich Intermetallics on the Wear Beheaviour of Eutectic Al-Si Piston Alloy (LM13)", Materials and Design, 2010, in press, (ISI Cited) S.G. Shabestari and M. Malekan, "Assessment of the Effect of Grain Refinement on the Solidification Characteristics of 319 Aluminum Alloy Using Thermal Analysis", Journal of Alloys and Compounds, Vol. 492, 2010, PP. 134-142, (ISI Cited) M. Divandari, S.G. Shabestari, V. Jamali, "Effect of Casting Section Thickness and Coating Thickness on the Fluidity of A356 Aluminum Alloy in Lost Foam Casting Process", International Journal of Cast Metals Research, Vol. 23, No. 1, 2010, PP. 23-29 (ISI Cited) B. Nami, S. G. Shabestari, S. M. Miresmaeili, H. Razavi, Sh. Mirdamadi, "The Effect of Rare Earth Elements on the Kinetic of the Isothermal Coarsening of the Globular Solid Phase in Semisolid AZ91 Alloy Produced via SIMA Process" , Journal of Alloys and Compounds, Vol. 489, 2010, PP. 570-575, (ISI Cited) M.H. Shaeri, H. Saghafian, S.G. Shabestari, " Effect of Austempering and Martempering Processes on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", International Journal of Iron and Steel Research, in Press S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, M.J. Torkamany, "Effect of Beam Interaction Time on Laser Alloying with Pulsed Nd-YAG Laser", Materials Science Technology (MST), in Press S.A. Vaziri, H.R. Shahverdi, M.J. Torkamany, S.G. Shabestari, "Effect of Laser Parameters on Properties of Surface Alloyed Aluminum Substrate with Ni", Journal of Optics and Lasers in Engineering, Vol. 47, issue 9, September 2009, PP. 971-975 (ISI Cited) E. Taghaddos , M.M. Hejazi, R. Taghiabadi, S.G. Shabestari, " Effect of Iron Intermetallics on the Fluidity of 413 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 468, 2009, PP. 539-549 K.A. Nazari, S.G. Shabestari, "Effect of Micro Alloying Elements on the Interfacial Reactions between Molten Aluminum Alloy and Tool Steel", Journal of Alloys and Compounds, Vol. 478, June 2009, PP. 523-530 M. Malekan and S.G. Shabestari, "Effect of Grain Refinement on Dendrite Coherency Point During Solidification of A319 Aluminum Alloy", Materials and Metallurgical Transacation A, Vol. 40A, Dec. 2009, PP. 3196-3203, (ISI Cited) M. Malekan, S.G. Shabestari, R. Gholamipour, S.H. Seyedein, " Effect of Ge Addition on Mechanical Properties and Fracture Behavior of Cu-Zr-Al Bulk Metallic Glass", Journal of Alloys and Compounds, Vol. 484, 2009, PP. 708-711, (ISI Cited) S.G. Shabestari , M.M. Hejazi , M. Bahramifar , "Effect of Magnesium and Artificial Aging on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", Advances in Materials and Processing Technologies , Advanced Materials Research , Volumes 83 – 86, Dec. 2009, PP. 415-421 S.G. Shabestari, M. Keshavarz, M.M. Hejazi, " Effect of Strontium on the Kinetics of Formation and Segregation of Intermatallic Compounds in A380 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 477, May 2009, PP. 892-899   S.G. Shabestari, D. Li, M. Isac, R.I.L. Guthrie, "The Role of Solidification Conditions on the Microstructural Features of AA6111 Aluminum Strips Cast on a Horizontal Single Belt Caster", International Journal of Materials Research (formerly Z. Metallkunde), Vol. 99, December 2008, PP. 1384-1392 R. Taghiabadi, H.M. Ghasemi, S. G. Shabestari, "Effect of Iron-Rich Intermetallics on the Sliding Wear Behaviour of Al-Si Alloys", Material Science & Engineering, 2008 H.A. Pour, M. Lieblich, A.J. Lopez, J. Rams, M.T. Salehi, S.G. Shabestari, "Assessment of Tensile Behaviour of an Al-Mg Alloy Composite Reinforced with NiAl and Oxidized NiAl Powder Particles Helped by Nano-Indentation", Journal of Composites A., Vol. 38, 2007, PP. 2536-2540 F. Shahri, A. Beitollahi, S.G. Shabestari, S. kamali, "Effect of Heat Treatment on the Structure and Magnetic Properties of Al-Ge Addedd Fe73.5-xSi13.5B9Nb3Cu Alloys", Journal of Physical Review B, 76, 2007, 024434-1-13 F. Shahri, A. Beitollahi, S.G. Shabestari, 6 others, "Stuructural Characterization and Magnetoimpedeance Effect in Amorphous and Nanocrystalline Al-Ge Substituted FeSiBNbCu Ribbons", Journal of Magnetism and Magnetic Materials, Vol. 312, 2007, pp. 35-42 O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminum Refining Process", Journal of the Materials Processing Technology, 2007 S.G. Shabestari, S. Ghodrat, "Assessment of Modification and Formation of Intermetallic Compounds in Aluminum Alloy Using Thermal Analysis ", Mineral Science and Engineering, 2007   S.G. Shabestari, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre-and Post-Utectic Reactions in 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 45, No. 2, 2006, pp. 207-214 O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminium Refining Process", Journal of Materials Processing Technology , 2006 S.G. Shabestari, N. Nanderka, W. Seeliger, Y. Banhart, "Optimisation of the Strength of Aluminium Foam Sandwich (AFS) Panels by Different Heat Treatment", Materials Science, Vol. 519-521, 2006, pp. 1221-1226 H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-Oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982 S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of the Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 3, 2005 H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982 S.M. Miresmaeili, J. Campbell, S.G. Shabestari, S.M.A. Boutorabi, " Precipitation of Sr-Rich Intermetallic Particles and their Influence on Pore Formation in Sr-Modified A356 Alloy ", Metallurgical and Materials Transactions A, Vol. 36A, 2005, pp. 2341-2349 S.G. Shabestari, P. Mokarian, S. Saeidinia,"Effect of Process Variables in Rotary Degassing of Aluminum", CIM Bulletin, Vol. 97, No. 1082, September 2004   S.G. Shabestari, F. Shahri, " Influence of Modification, Solidification Conditions and Heat Treatment on the Microstructure and Mechanical Properties of A356 aluminum alloy ", Journal of Material Science, Vol. 39, 2004, pp. 1-10 S.G. Shabestari, H. Momeni, "Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al-Si-Mg Alloys", Journal of Materials Processing Technology, Vol. 153-154C, 2004, PP. 193-198 S.G. Shabestari, "The Effect of Iron and Manganese in the Formation of Intermetallic Compounds in Aluminum-Silicon Alloys", Journal of Materials Science and Engineering A., Vol. 383, 2004, PP. 289-298 S.M. Miresmaeili, S.G. Shabestari, S.M.A. Boutorabi, "Effect of Melt Filtration on Prosity Formation in Sr-Modified A356 Aluminum Alloy", International Journal of Cast Metals Research, Vol. 16,No. 6, 2003, PP.541-548   S. Shabestari, S.M. Miresmaeili, S.M.A. Boutorabi , " Effect of Sr-Modification and Melt Cleanliness on Melt Hydrogen Absorption of 319 Aluminium Alloy ", Journal of Material Science, 2003, pp. 1901-1907 S.M. Miresmaeli , S. Shabestari, S.M.A. Boutorabi, " The effect of SR-Modification Treatment on Porosity Formation of Reduced Pressure 319 Aluminum Alloy Castings ", Canadian Metallurgical Quarterly, 2003 S.G. Shabestari, M. Ghanbari, "Effect of Plastic Deformation on Intermetallic Compounds and Semi-Solid Microstructure of Al-8Si-3Cu-4Fe-2Mn Alloy", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia M. Malekan, S.G. Shabestari, "Computer-Aided Cooling Curve Thermal Analysis Used to Predict the Quality of Aluminum Alloys", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia S.G. Shabestarit, M.M. Hejazi, M. Bahramifar ,"Effect of Magnesium and Artificial Ageing on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", the Proceedings of International Conference on Advances in Materials and Processing Technology, AMPT 2008, 2-5 November, 2008, Manama, Bahrain S. Mirzaei, A. Beitollahi, S.G. Shabestari, F. Shahri, "Effect of Heat treatment on the GMI Effect and Domain Structures of Amorfous and Nano Crystalline Soft Magnetic Fe72Si12.5B9Nb3 Cu1Al1.5Ge1 alloys ", 2nd International Congress on Nano Science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran Z. Seyedraoufi, H. Saghafian, S.G. Shabestari, "Synthesis of Cu-Al2O3 Nano Composite by Thermochemical Method", 2nd International Congress on Nano science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran S.G. Shabestari, M.M. Hejazi, " Combined Effects of Cooling Rate and Grain Refinement on the Microstructure and Hardness of Modified 319 Aluminum Alloy", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany M.H. Shaeri, S.G. Shabestari, H. Saghafian, "Effect of Austempering and Martempring Heat Treatment on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany R. Taghiabadi, H.M. Ghasemi, S.G. Shabestari, "Sliding Wear Behaviour of High Iron F332 Al-Si Alloy", The 3rd International Conference on Application of Traditional and High Performance Materials in Harsh Environments, 2008 A. Beitoollahi, F. Shahri, S.G. Shabestari, S. Kamali, "Effect of Heat-Treatment on the Structure and Magnetic Properties of Al-Ge-added FINEMENT Alloys", Knowledge Based Industries and Nano Technology Conference, 2007 H. Abdollahpour, S.G. Shabestari, M.T. Salehi, M. Lieblich, "Manufacturing and Mechanical Properties of Aluminum Matrix Composites Reinforced with NiAl Intermetallic Compound Produced by Hot-Extrusion", Tehran International Congress on Manufactring Engineering (TICME), 2007 D. Li, S.G. Shabestari, J. Kim, M. Isac, R.I.L. Gutherie, "Studies in the Costing of AA6111 Strip on a Horizontal, Single Belt, Strip Casting Simulator", Light Metals, 2005 F. Shahri, S.E. Roozmeh, S.M. Mohseni, A. Beitollahi, S.G. Shabestari, "Structural Magnetic Properties and MI Effect in Amorphous and Nano Crystalline AlGe-Substituted FeSiBNbCu Ribbons", 1st Iran-Russia, 2005 S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgists of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, PP. 253-268 S.G. Shabestrai, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre- and Post-Eutectic Reactions in 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgist of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, P.P. 299-313 S.G. Shabestari, H. Moemeni, "Effect of Copper and Solidification Condition on the Microstructure and Mechanical Properties of Al-Si-Mg", International Advances in Materials and Processing Technology, Irland, 2003