Full Name: Dr. Djavanroodi, Faramarz   Position: Assistant Professor   Phone: 98-21-77240203, 73912911   Fax: 98-21-77240488   Email: javanroodi@iust.ac.ir   Address: Iran University of Science & Technology,                Tehran, IRAN

  1979 - 1983     The City University, St John Street London EC1.

                           BSc. Hons. Degree in Mechanical Engineering.

  1983 - 1985     University of Manchester Institute of Science and Technology MSc. Mech. Eng.

                           (Applied Mechanics)

                           Subjects: Elasticity, plasticity, metal forming, material science and design.

                           Dissertation title – Tensile Testing of Green Compacts Produced by Rotary Forging

  1985 - 1989     Imperial College of Science, Technology and Medicine, London. PhD.

                           Creep and Creep-Fatigue Crack Growth

   Teaching Experience

  1983 - 1985     Part time teaching assistant at University of Manchester Institute of Science and

                           Technology

  1985 - 1990     Imperial College of Science, Technology and Medicine. 
                           Teaching fracture mechanics and strength of material for undergraduate and

                           graduate experimental and theoretical work for thesis. 

  2001 - 2002      Academic visitor at imperial College of Science, Technology and Medicine.

  1990-                Iran University of Science and Technology. My teaching activities include

                           undergraduate and postgraduate courses.  Static, Design and mechanics

                           of materials for undergraduate and metal forming, advanced coating technology

                           and fracture mechanics for post graduate students. I have been supervising

                           more than 100 undergraduate, postgraduate and PhD. student projects.

 Research & Administration Experience

  1985 - 1989     Research Assistant. Imperial College of Science, Technology and Medicine.

                          The research project was concerned with the prediction of failure at elevated

                           temperatures of cracked engineering components. The project brought together a

                           number of important theoretical ideas into a form that can be used by industry.

  1988 - 1990     Post doctorate research assistant. Imperial College of Science, Technology and

                           Medicine. The research project, which was funded by the Department of Trade

                           and Industry, was concerned with the prediction of components lifetimes.

  1995 - 1998     Course developer and director for M.Sc. in Manufacturing Technology at Iran

                           University of Science and Technology. 

  1990 - 2001     Advisor on research projects, funded by Iran Central Electricity Board (Tavanir),

                          concerned with the production and evaluation of high temperature components

                          for power plants.

  2001 - 2005     I was commissioned to erect the International University of chabahar, this

                           educational establishment is part of University of London External program.

• Metal forming
• Fracture at high temperature 
• Creep / Fatigue 

 a) Journal Papers

• F. Djavanroodi, M. Ebrahimi, B. Rajabifar, S. Akramizadeh [2010]. “ Fatigue design factors for ECAPed materials”. Materials Science and Engineering A xxx (2010) xxx–
• F. Djavanroodi, M. Ebrahimi [2010]. “ Effect of die parameters and material properties in ECAP with parallel channels ”. Materials Science and Engineering A xxx (2010) xxx–
• M. Mazaheri, F. Djavanroodi, K.M. Nikbin [2010]. “ Creep life assessment of an overheated 9Cr-1Mo steel tube”. International Journal of Pressure Vessels and Piping xxx (2010) 1-7
• F. Djavanroodi, Sh. Abbasnejad D., H. Nezami E. [2010]. “ Deep drawing of aluminum alloys using a novel hydroforming tooling” . Materials and Manufacturing Processes, xx: xxx–xxx, 2010.
• F. Djavanroodi, M. Ebrahimi [2010]. “ Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation ”. Materials Science and Engineering A 527 (2010) 1230–1235
• F. Djavanroodi, A. Pirgholi, and E. Derakhshani [2010]. “FEM and ANN Analysis in Fine-Blanking Process”. Materials and Manufacturing Processes, 25: 864–872, 2010.
• F. Djavanroodi, A. Derogar [2010]. “Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets”, Materials and Design 31-- 4866–4875.
• H. R. Molladavoudi, F. Djavanroodi [2010]. “Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming’’. International Journal Advance Manufacturing Technology
• F. Djavanroodi, M. Ebrahimi [2010]. “ Investigation of strain behavior in the modified equal channel angular pressing die by 3D finite element method ”. Journal of Applied Science 10 (20):2411 – 2418.
• Gheisary, M. , and Djavanroodi F., [2010]. “Study of double bulge hydroforming and rotary forming”. Modares Technical and Engineering, xx: xx–xx, 2010.
• A. Pirgholi, E. Derakhshani, K. Abrinia and F. Djavanroodi, [2010]. “Study in effect of different parameters in fine-blanking process with FEM and its formulation based on ANN”. Modares Technical and Engineering, 39: 15–27, 2010.
• H. Nezami, F. Djavanroodi & D. Sh. Abbasnejad, [2009]. “ Experimental and numerical analysis for hydroformingTi6A14V alloy used in aerospace, Assisted by floating disk” Journal of Applied Science 9 (16): 2925 – 2932 
• Ghafoori Ahangarar, R. Djavanroodi, F. Pakbaz, M. [2008] “Parameter affecting hydroforming deep drawing and comparison of common deep drawing methods using FEM”. Modares Technical and Engineering, 32: 69-85.
• Djavanroodi, F. [2008]. “ Creep-Fatigue Crack Growth Interaction in Nickel Base Supper Alloy ". American Journal of Applied Sciences 5 (5): 454-460.
• Djavanroodi, F. Sabeghi, M and Abrinia, K. [2008]. “Analysis of the Parameters Affecting Warping In Radial Forging Process". American Journal of Applied Sciences 5 (8): 1013-1018.
• Djavanroodi, F. Gheisary, M. [2008]. “Fracture and spring back on Double Bulge Tube Hydro - Forming ". American Journal of Applied Sciences 5 (8): 1041-1046 .
• Abrinia, K. Naee, H. Sadeghi, F. and Djavanroodi, F. [2008]. “New Analysis for the FGM Thick Cylinders under Combined Pressure and Temperature Loading ". American Journal of Applied Sciences 5 (7): 852-859 .
• Djavanroodi, F. Gheisary, M. and Zoghi-shal, H. [2008]. “Analytical and Numerical analysis of Free Bulge Tube Hydroforming ". American Journal of Applied Sciences 5 (8): 972-979 .
• Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S. [2008]. “Estimation of C*-Integral for Radial Cracks in Annular Discs under Constant Angular Velocity and Internal Pressure". American Journal of Applied Sciences 5 (8): 997-1004.
• Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S. [2008]. “Estimation of C*-Integral in a thin T-section subjected to projection and remote loading based on elastic concentration factor". American Journal of Applied Sciences 5 (5): 586-596.
• Djavanroodi, F. and Nikbin , K. M. [2006]. “ The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment ". International Journal of Engineering Science. Vol. 17, No. 34, pp 1-7 .
• Djavanroodi, F. and Nikbin, K. [2001]. “Transient Effect During Early Stages of Creep Crack Growth.” International Journal Of Engineering Science, Vol. 12, pp. 67 - 83,.
• Djavanroodi, F. Nikbin, K. and Webster, G.A. [1997]. “Prediction of Crack Growth under Creep-Fatigue Loading Conditions for Low Alloy Steels and Nickel Based Super Alloy at High Temperature“ International Journal Of Engineering Science Volume 8 P112 – 124.3) 
• Hollstein, T., Webster, G.A. and Djavanroodi, F. [1992]. “Creep Crack Growth in a 1%CrMoV Steel and a 32%Ni20%Cr Alloy”. J. of Materials at high Temperatures. Vo1. 10, No 2. Butterworth - Heinemann Ltd. Pp. 92 - 96.
• Djavanroodi, F. and Webster, G.A. [1992]. “Comparisons Between Numerical and Experimental Estimates of Creep Fracture Mechanics Parameter C*”. Fracture Mechanics: 22^nd Symposium (Volume 1) ASTM STP, pp. 271 - 283.

      b) International and national conference papers

• F. Djavanroodi and M. Ebrahimi, [2010]. “Computational analysis of sheet via continuous equal channel angular pressing”, 10^th Iranian Conference on Manufacturing Engineering – ICME, 2010, Babol Noshirvani University of Technology . Babol, Iran
• F. Djavanroodi and M. Ebrahimi, [2009]. “Effect of die channel angle in equal channel angular pressing”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
• F. Djavanroodi and M. Ebrahimi, [2009]. “Mechanical properties of commercial pure aluminum in the ECAP process”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
• K. Asghari, F.DJavanroodi, R. Madoliat, H.Shahabbaspour, [2009]. “Prediction the Fracture Mechanics Parameter Using Artificial Neural Networks” ISME international mechanical engineering congress, Tehran University, 19-21-May, 2009.
• P. Koochebaghi, R. Madoliat, F.Djavanroodi and S. Eskandari, [2007]. “ Prediction of cold rolling force in 1100 aluminium sheet using Artificial Neural Networks ” 2 ^nd Tehran international congress on manufacturing engineering, - ICME, 2007, Iran University of Science and Technology, Tehran, Iran.
• M.Gheisary, F.Djavanroodi, [2007]. “Friction and Strain Hardening Coefficient on Double Bulge Tube Hydroforming” 2 ^nd Tehran international congress on manufacturing engineering, - ICME, 2007, Iran University of Science and Technology, Tehran, Iran.
• Djavanroodi, F. Derogar, A. [2009]. “Experimental evaluation of forming limit diagram for Ti6Al4V titanium alloys sheets using floating disc” 8^th International conference of Iranian Aerospace Society, - IAS2009, Malek Ashtar University, Isfahan, Iran
• Djavanroodi, F. Derogar, A. [2009]. “ Calculation of Forming Limit Diagram (FLD) for Ti-6Al-4V sheet with Experimental Data & Finit Element Method & Artificial Neural Network ”, 9^th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran.
• Djavanroodi, F. Nosrati, M. Derogar, A. [2008]. “Application of neural network in calculating stress intensity factor for three point bend test” 7^th International conference of Iranian Aerospace Society, - IAS2008, Sharif University of Technology, Tehran, Iran
• Djavanroodi, F. Nosrati, M. Derogar, A. [2008]. “Stress intensity factor calculation using numerical and neural network” ISME2008 international mechanical engineering congress, Shahid Bahonar University, Kerman, Iran.
• H.R. Molladavoudi 1, F. Djavanroodi, [2009]. “Experimental study of the effects of thickness reduction on Mechanical properties and spinning accuracy for aluminum 7075-O , during flow forming”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
• H.R. Molladavoudi 1, F. Djavanroodi, [2009]. “Influence of feed rate on Mechanical properties and spinning accuracy for aluminum 7075-O , during flow forming” 8^th International conference of Iranian Aerospace Society, - IAS2009, Malek Ashtar University, Isfahan, Iran
• Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2008]. “EXPERIMENTAL AND NUMERICAL ANALYSIS FOR HYDROFORMING OF ALUMINUM ALLOY, Al 7075, ASSISTED BY FLOATING DISK”, The 13^th International Conference on Machine Design and Production 03-05 September 2008, Istanbul, Turkey.
• H. Nezami. E, Sh.Abbasnejad. D, F. Djavanroodi, [2008]. “A NEW EXPERIMENTAL METHOD FOR HYDROMECHANICAL DEEPDRAWING OF TITANIUM ALLOY, TI6Al4V”, The 13^th International Conference on Machine Design and Production 03-05 September 2008, Istanbul, Turkey.
• Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2009] . “ A New Method of Ti6Al4V Hydroforming, Used in Aerospace Structures ” 8th Iranian Aerospace Society Conference Feb. 2009, Malek-e-Ashtar University of Technology, Isfahan, Iran.
• Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2009] . “ Obtaining the flow stress curve of Aluminum alloy sheet, Al7075, from hydraulic bulge test ”, 5^th International Conference and Exhibition on Design and Manufacturing of Machines and Dies/Molds, June 2009, Kushadasi, Turkey.
• Djavanroodi, F. Nikbin, K. Kargar-nejad, S. Hamrang, A. [2007]. “Three dimensional stress analysis and life assessment of gas turbine blade“ 15^th International Conference on mechanical engineering- ISME 15-17, May 2007 Amir Kabir University of Technology, Tehran, Iran.
• Djavanroodi, F. Abrinia, K. and Pirgholi, A. [2007]. “Clearance and die V- ring radius effects on fine blanking using finite element method“ 15^th International Conference on mechanical engineering- ISME 15-17, May 2007 Amir Kabir University of Technology, Tehran, Iran.
• Djavanroodi, F. Kargar-nejad, S. and Hamrang, A. [2006]. “ Numerical determination of Limit Load using Elastic Modulus Reduction (E.M.R . ) method“ The Third International Conference On Advances In Mechanical Engineering And Mechanic 24-26, Dec. 2006, Tunesia .
• Djavanroodi, F. Sabeghi, M. [2006]. “ Analysis of parameters affecting warping in radial forging process ’’. 7th world congress on computational mechanics 16-22, July , 2006 USA.
• Djavanroodi, F. Rahmani, V. [2006]. “ Fatigue failure and life estimation of a cold forging die using a Finite element analysis ’’ . 14^th International Conference on mechanical engineering- ISME Apr 2006 Esfahan University of Technology, Esfahan, Iran.
• Djavanroodi, F. and Sabeghi, M. [2005]. “ Analysis of the effective parameters on the radial process by a 2D finite element method“ Tehran International Congress on Manufacturing Engineering (TICME 2005) 12-15, Dec. 2005 , Tehran, Iran.
• Djavanroodi, F. Gowhari-Anaraki, A. R. [2005]. “ Low cycle fatigue life prediction for spot-weld joints’’. 5th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics 18-20 May 2005, USA.
• Djavanroodi, F. and Soltani, A. [2001]. “Life Assessment and Extension of 1%Cr1/2%Mo Pipe Steel.”5^th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P11 - 21.
• Djavanroodi, F. and Shariari, D. [2001]. “Design and Analysis Using Finite Element Method For Fixture used in Production of Turbine Blade.” 5^th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P595 - 607.
• Djavanroodi, F. and Nikbin, K. [2001]. “Prediction of Crack Growth and Residual Life under Creep Loading”. 5^th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P93 - 107.
• Djavanroodi, F. and Karimi, H. [2001]. “Life Assessment and Extension of Nickel Base Supre Alloy IN738L.C. used in Gas Turbine Blades”. 5^th International Mechanical Engineering Conference, isme2001, Tehran, Iran. P521 - 531.
• Ahmadian, H. and Djavanroodi, F. [2001]. “Sensitivity of Geometrical Tolerances on Turbine Blades Natural Frequencies”. 5^th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P741 - 746.
• Djavanroodi, F [1998]. “Remnant Life Assessment of Super Alloy IN 738 L.C. Gas Turbine Blades” Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
• Djavanroodi, F. [1998]. “Analytical Behaviour of Multi-Layer Springs Used in Military Applications”. Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
• Djavanroodi, F. [1998]. “Fatigue Life Assessment of Dies used in Manufacturing Car Components” Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
• Djavanroodi, F. [1995]. “Manufacturing of Steam Turbine Blades from Recycled Material” Proceedings of the third Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
• Djavanroodi, F. Nikbin, K. and Webster, G.A. [1994]. “Prediction of Transient Effect During Early Stages of Creep Crack Growth’’. 10^th European conference of Fracture Mechanics 20 - 23 September 1994, Berlin, FRG.
• Djavanroodi, F. Nikbin, K. [1994] “High Temperature Crack Growth in Low Alloy steels and Nickel - Base super Alloy Steel Under Static and Cyclic Loading.” Localized Damage 94 - 21 to 23 June 1994, Udine, Italy.
• Djavanroodi, F. Nikbin, K. and Webster, G.A. [1994]. “Influence of Service Exposure Frequency and Size Effect on High Temperature Crack Growth on A 1%Cr 1%Mo 1/4%V Rotor Steel and 21/4%Cr 1%Mo Pipe Steel.” Material For Advanced Power Engineering 3 - 6 October 1994, Liege, Belgium.
• Djavanroodi F. Nikbin, K. [1993]. “Engineering Concepts in High Temperature Design and Life Prediction Extension Procedure in the Power Generation Industry.” 8^th International Power system Conference, Tehran, Iran, pp.219 - 227.
• Djavanroodi, F. [1993]. “Mechanical Behavior of Alloy Steel Used in Steam Turbines Under Static and Cyclic Loading at High Temperatures.” 2^nd Annual Conference, Institute of Mechanical Engineers 1993, Tehran, Iran.
• Djavanroodi, F., Etemad, M. and Nikbin, B. [1992]. “A High Temperature Life Prediction Crack Growth Methodology for the Power Generation Industry.” 7^th International Power system Conference, Tehran, Iran, pp.182 - 193.
• Djavanroodi, F., Abrinia, K. and Blourbar, A. [1992]. “Determination of the Crack Growth Behaviour Pre-Exposed 14MoV63 Steel” Proceedings of the first Annual Conference, Institute of Mechanical Engineers, Tehran, Iran. pp.61 – 63
• Djavanroodi, F. and Webster, G.A. [1990]. “Influence of Service Exposure on High Temperature Crack Growth in Low Alloy Steels.” High Temperature Materials for Power Engineering, part I (Ed) E. Bachelet et al, Kliwer academic Publishers, Liege, Belgium. pp. 705 - 714
• Hollstein, T., Webster, G.A. and Djavanroodi F. [1990]. “Creep crack Growth in a 1%CrMoV Steel and a 32%Cr Alloy”. Proceedings of the 8^th European Conference on Fractures, Torino, Italy. Published in Fracture Behaviour and Design of Materials and Structures, Vol. III, EMAS, Warley. pp. 1249 - 1256.
• Hollstein, T., Webster, G.A. and Djavanroodi F. [1989]. “Creep Crack Growth in 1%CRMOV Steel” An elevation of Cost 505 Creep Crack Growth Round Robin, prepared for the European Economic Community.
• Hollstein, T., Webster, G.A. and Djavanroodi F. [1989]. “Creep Growth in 1%CrMoV Steel and Alloy 800H” The Results of an EGF Round Robin, IWM Report.
• Hollstein, T., Webster, G.A. and Djavanroodi F. [1988]. “High Temperature Crack Growth in Alloy 800H and a 1%CrMoV Steel - The Results of a Round Robin” Proceedings of the 7^th European Conference of Fracture, Budapest, Hungary, Published in Failure Analysis - Theory and Practice, Vol.II, EMAS. pp. 656 – 668

• Webster, G.A. and Djavanroodi, F. [1986] “Determination of the Crack Growth Behavior and Failure Mode of Pre-Exposed Material I” Technical Report. Cost 505, Group 2 - Remnant Life, Project UK26, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [1986] “Elevated Temperature Crack Growth in Steam-Turbine Materials I”. Technical Report. Cost 505, Group 6A - High Temperature Crack Growth, Project UK 18, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [1987] “ Elevated Temperature Crack Growth in Steam-Turbine Materials II”. Technical Report. Cost 505, Group 6A- High Temperature Crack Growth, Project UK 18, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [1988] “Determination of the Crack Growth Behavior and Failure mode of Pre-Exposed Material II” Technical Report. Cost 505, Group 2 Remanent Life, Project UK 26, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [1989] “Elevated Temperature Crack Growth in Steam-Turbine Materials III”. Technical Report. Cost 505, Group 6A. High Temperature Crack Growth, Project UK 18, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [1989] “Determination of the Crack Growth Behaviour and Failure Mode of Pre-Exposed Material III”. Technical Report. Cost 505, Group 2 - Remnant Life, Project UK 26, prepared for the European Economic Community.
• Webster, G.A. and Djavanroodi, F. [June - 1990] “Predictions of Crack Growth and Residual Life under Creep, Creep-Fatigue and Thermal Loading” Technical Report. Cost 501 - Round 2, Working Package 5, Project UK 7, prepared for the European Economic Community.
• Webster, G.A., Djavanroodi, F. and Nikbin, K.M. [November - 1990] “Predictions of Crack Growth and Residual Life under Creep, Creep-Fatigue and Thermal Loading.” Technical Report. Cost 501 - Round 2, Working Package 5, Project UK 7, prepared for the European Economic Community.

   Courses Taught

• Continuum Mechanics(part1)
• Continuum Mechanics(Part2)
• Continuum Mechanics(Par3)
• Metal forming Analysis
• Mechanical engineering design1(part1)
• Mechanical engineering design1(part2)
• Manufacturing Processes (Part1)
• Manufacturing Processes (Part2)
• Materials science(part1)
• Materials science(part2)