Volume 18, Issue 2 (June 2022)                   IJEEE 2022, 18(2): 35-45 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Rajamand S. Optimal Power Flow Using Adaptive Droop Coefficients and Considering the Probability Approach of Renewable Sources and Load. IJEEE 2022; 18 (2) :35-45
URL: http://ijeee.iust.ac.ir/article-1-2169-en.html
Abstract:   (2291 Views)
Fair distribution of generated power has a significant impact on the performance of the power system. Many methods have been proposed for the safe and secure operation of power systems under the uncertainties of distributed generators and system load. In this paper, we present an optimal power distribution algorithm for distributed generators against uncertainties and load changes of direct-current and alternating-current transmission systems. In this optimal algorithm, considering the stable-state constraints for all uncertainties is performed. In order to establish these constraints at the lowest cost, the adaptive droop coefficients are employed to optimize the power sharing, reloading and modifying the power coefficient of each distributed generator in the power system. Simulation results show the efficiency of the proposed method to improve the performance of the system and reduce the total cost. The voltage/power deviation from reference value in the proposed method is about 1-1.5% where in the conventional droop control, it is more than 2-3%. In addition, in the same uncertainty of the load/distributed generator power in the test system, proposed method requires 20% less power redistribution compared to the conventional droop method. Also, total cost increasing (due to uncertainty increasing) in the conventional droop method is higher than the proposed method (about 10-15%) which shows the robustness of the suggested method against uncertainty changes.
Full-Text [PDF 973 kb]   (1168 Downloads)    
  • Adaptive droop coefficient approach for balanced power sharing;
  • Uncertainty modeling of load and DG power for more robust control of frequency and voltage;
  • Three different types of uncertainty (Norm 1, Norm 2, and infinite norm) consideration and analysis of the performance of the system using conventional and adaptive droop methods.

Type of Study: Research Paper | Subject: Distribution Systems Efficiency
Received: 2021/05/01 | Revised: 2024/05/13 | Accepted: 2021/12/17

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.