Showing 3 results for Leong
Jia Wen Tang, Chin Leong Wooi, Wen Shan Tan, Nur Hazirah Zaini, Yuan Kang Wu, Syahrun Nizam Bin Md Arshad@hashim,
Volume 21, Issue 2 (Special Issue on the 1st International Conference on ELECRiS 2024 Malaysia - June 2025)
Abstract
Photovoltaic (PV) energy is increasingly recognized as an environmentally friendly source of renewable energy. Integrating PV systems into power grids involves power electronic inverters, adding complexity and evolving traditional grids into smarter systems. Ensuring the reliability of decentralized PV generation is crucial, particularly as PV systems are often exposed to extreme weather conditions. This study investigates the impact of temperature and solar radiation on the performance of a PV array, focusing on key characteristics such as open-circuit voltage (VOC), short-circuit current (ISC), and maximum power (PMAX). Using PSCAD/EMTDC simulations, the study analyses these characteristics under varying temperatures (5°C to 45°C) and radiation levels (200 W/m² to 1200 W/m²). Results indicate that VOC increases with higher irradiance but decreases with higher temperatures. ISC increases with both higher radiation and temperature, while PMAX is optimized at high irradiance and low temperatures. The impulse withstand voltage (Vimp), a critical factor for PV system reliability, is assessed according to the PD CLC/TS 50539-12 standard. Findings reveal that at low temperatures and high radiation, the Vimp requirement is highest, emphasizing the need for robust voltage protection in PV systems. These insights underscore the importance of considering local climate conditions and implementing effective thermal management to enhance the performance and reliability of PV systems.
Ying Foo Leong, Nizaruddin M. Nasir, Suliana Ab-Ghani, Norazila Jaalam, Nur Huda Ramlan,
Volume 21, Issue 2 (Special Issue on the 1st International Conference on ELECRiS 2024 Malaysia - June 2025)
Abstract
This paper focuses on the application of a cascaded multilevel inverter, specifically the 5-level multilevel inverter, utilizing a proposed controller known as the FLC-PSO-PI controller. The primary challenge addressed in this research is the precise regulation of output voltage in the multilevel inverter during load variations while meeting voltage harmonic and transition requirements as per industry standards, which are the 10 % voltage limit recommended by IEC and 8 % of total harmonic distortion (THD) by IEEE. An innovative solution is proposed by integrating PSO and FLC to dynamically adapt the controller in real-time, ensuring stable and accurate output voltage regulation. The proposed controller is designed and simulated using MATLAB/Simulink, and its performance is compared with PSO-PI and no controller under various load conditions. The results demonstrate that the FLC-PSO-PI controller significantly enhances output voltage regulation were achieving the desired peak voltage and low THD across different load scenarios, including half load to full load (0.8 %) and no load to full load (0.89 %). Furthermore, the FLC-PSO-PI controller exhibits superior transient response characteristics, such as reduced overshooting (2.89 %), faster rise time at 36.946 µs, and satisfactory settling time at 151.014 µs. This research contributes to the advancement of multilevel inverter technology and its potential applications in renewable energy systems, motor drives, and grid-connected devices. The proposed FLC-PSO-PI controller offers a promising solution for precise voltage regulation in multilevel inverters, enhancing their performance and enabling widespread adoption in various industrial sectors.
Huang Yan, Hadi Nabipour Afrouzi, Chin-Leong Wooi , Hieng Tiong Su, Ismat Hijazin,
Volume 21, Issue 2 (Special Issue on the 1st International Conference on ELECRiS 2024 Malaysia - June 2025)
Abstract
In order to solve the difficulty of digital signal calibration of electric power equipment, such as low precision, inability to test the full range, and complicated configuration, and further promote the development of power system, a proposed time measurement calibration device is designed, and its performance is verified in this paper. This paper points out the main drawbacks of the existing calibration system, carries on the design innovation of the key technologies based on FPGA (Field Programmable Gate Array), puts forward the optimization method of the software and hardware, and verifies the accuracy of the input and output signal by experiments. The accuracy of input and output SV, GOOSE, and contact signal of the proposed calibration device in this paper can be better than 10μs, which is a meaningful improvement in accuracy and efficiency for time measurement calibration.
