Search published articles


Showing 3 results for Cost of Energy
Optimal Placement and Sizing of Multiple Renewable Distributed Generation Units Considering Load Variations Via Dragonfly Optimization Algorithm
A. Boukaroura, L. Slimani, T. Bouktir,
Volume 16, Issue 3 (9-2020)
Abstract
The progression towards smart grids, integrating renewable energy resources, has increased the integration of distributed generators (DGs) into power distribution networks. However, several economic and technical challenges can result from the unsuitable incorporation of DGs in existing distribution networks. Therefore, optimal placement and sizing of DGs are of paramount importance to improve the performance of distribution systems in terms of power loss reduction, voltage profile, and voltage stability enhancement. This paper proposes a methodology based on Dragonfly Optimization Algorithm (DA) for optimal allocation and sizing of DG units in distribution networks to minimize power losses considering variations of load demand profile. Load variations are represented as lower and upper bounds around base levels. Efficiency of the proposed method is demonstrated on IEEE 33-bus and IEEE 69-bus radial distribution test networks. The results show the performance of this method over other existing methods in the literature.

Securing Reliability Constrained Technology Combination for Isolated Micro-Grid Using Multi-Agent Based Optimization
P. Paliwal,
Volume 18, Issue 1 (3-2022)
Abstract
The determination of a suitable technology combination for an isolated micro-grid (IMG) based on hybrid renewable energy resources (HRES) is a challenging task. The intermittent behavior of RES leads to an adverse impact on system reliability and thus complicates the planning process. This paper proposes a two-fold approach to provide a suitably designed HRES-IMG. Firstly, a reliability-constrained formulation based on load index of reliability (LIR) is developed with an objective to achieve a minimum levelized cost of energy (LCOE). Multi-state modeling of HRES-IMG is carried out based on hardware availability of generating units and uncertainties due to meteorological conditions. Modeling of battery storage units is realized using a multi-state probabilistic battery storage model. Secondly, an efficient optimization technique using a decentralized multi-agent-based approach is applied for obtaining high-quality solutions. The butterfly-PSO is embodied in a multi-agent (MA) framework. The enhanced version, MA-BFPSO is used to determine optimum sizing and technology combinations. Three different technology combinations have been investigated. The combination complying with LIR criterion and least LCOE is chosen as the optimal technology mix. The optimization is carried out using classic PSO, BF-PSO, and, MA-BFPSO and obtained results are compared. Further, in order to add a dimension in system planning, the effect of uncertainty in load demand has also been analyzed. The study is conducted for an HRES-IMG situated in Jaisalmer, India. The technology combination comprising of solar, wind, and battery storage yields the least LCOE of 0.2051 $/kWh with a very low value of LIR (0.08%).  A reduction in generator size by 53.8% and LCOE by 16.5% is obtained with MABFPSO in comparison with classic PSO. The results evidently demonstrate that MA-BFPSO offers better solutions as compared to PSO and BF-PSO.

Evaluation of Wind Speed Probability Distribution Model and Sensitivity Analysis of Wind Energy Conversion System in Nigeria
I. K. Okakwu, O. E. Olabode, D. O. Akinyele, T. O. Ajewole,
Volume 19, Issue 2 (6-2023)
Abstract
This paper evaluates the wind potential of some specified locations in Nigeria, and then examines the response of wind energy conversion systems (WECSs) to this potential. The study employs eight probability distribution (PD) functions such as Weibull (Wbl), Rayleigh (Ryh), Lognormal (Lgl), Gamma (Gma), Inverse Gaussian (IG), Normal (Nl), Maxwell (Mwl) and Gumbel (Gbl) distributions to fit the wind data for nine locations in Nigeria viz. Kano, Maiduguri, Jos, Abuja, Akure, Abeokuta, Uyo, Warri and Ikeja. The paper then uses the maximum likelihood (ML) method to obtain the parameters of the distributions and then evaluates the goodness of fit for the PD models to characterize the locations’ wind speeds using the minimum Root Mean Square Error (RMSE). The paper analyses the techno-economic aspect of the WECSs based on the daily average wind speed; it evaluates the performance of ten 25 kW pitch-controlled wind turbines (WT1 – WT10) with dissimilar characteristics for each location, including the cost/kWh of energy (COE) and the sensitivity analyses of the WECSs. Results reveal that Ryh distribution shows the best fit for Kano, Jos, Abeokuta, Uyo, Warri and Ikeja, while the Lgl distribution shows the best fit for Maiduguri, Abuja and Akure due to their minimum RMSE. WT7 achieves the least COE ranging from $0.0328 in Jos to $4.4922 in Uyo and WT5 has the highest COE ranging from $0.1380 in Ikeja to $53.371 in Uyo. The paper also details the sensitivity analysis for the technical and economic aspects.

Page 1 from 1     
Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.