Showing 4 results for Islanded Mode
Shankarshan Prasad Tiwari, Ebha Koley,
Volume 18, Issue 4 (12-2022)
Abstract
In recent years, DC microgrid has attracted considerable attention of the research community because of the wide usage of DC power-based appliances. However, the acceptance of DC microgrid by power utilities is still limited due to the issues associated with the development of a reliable protection scheme. The high magnitude of DC fault current, its rapid rate of rising and absence of zero crossing hinders achieving reliable protection in DC microgrid. Further, the intermittency associated with the non-conventional distributed generators demands adaptiveness under varying weather conditions. In this paper, the above-mentioned issues are addressed by developing a bagging tree-based protection approach for a multi-terminal DC microgrid. The proposed scheme addresses the intermittency associated with renewable sources. It performs the functions of mode detection, fault detection/classification, and faulty section identification using local information of current and voltage signals only. The same avoids the communication network related drawbacks like data loss and latency.
Shankarshan Prasad Tiwari,
Volume 18, Issue 4 (12-2022)
Abstract
In modern infrastructure, the demand for DC power-based appliances is rapidly increasing, and this phenomenon has created a positive impact on the acceptance of the DC microgrid. However, due to numerous issues such as the absence of zero crossing, bidirectional behaviour of sources, and different magnitudes of fault current during grid connected and islanded modes of operation, protecting DC microgrid remains a difficult task. Apart from these challenges, intermittent conditions are also a major challenge. Under such type scenarios, shadow conditions in the solar based DERs will reduce the desired output of the solar panels simultaneously in wind based DERs will be affected due to the low pressure of air. In this type of circumstances threshold setting based overcurrent relays may fail to sense the operational dynamics of the system. Therefore, in this manuscript, an ensemble of decision tree-based protection scheme is proposed to provide immunity against the stochastic conditions under the varying natures of the fault resistance. A total of 7150 test cases have been considered for validation of the protection scheme and all modules have been tested.
S. Prasad Tiwari,
Volume 19, Issue 3 (9-2023)
Abstract
In spite of the numerous benefits over the traditional power distribution system, protection of the microgrid is a challenging and complex task. The varying fault resistances due to dissimilar grounding conditions can affect the performance of the protection scheme. Under such conditions, the magnitude of the fault current can vary from lower to higher level. In addition to the above, the dissimilar magnitude of fault current during grid connected and islanded mode demands a protection scheme that can easily discriminate the mode of operation. The magnitude of fault current in grid-connected and islanded modes needs a robust protection scheme. In this regard, an ensemble of subspace kNN based robust protection scheme has been proposed to detect the faulty conditions of the microgrid. The tasks of the mode detection, fault detection/classification as well as faulty line identification has been carried out in the proposed work. In the proposed protection scheme, discrete wavelet transform (DWT) has been used for processing of the data. After recording the voltage and current signals at bus-1, the protection scheme has been validated. The validation of the protection scheme in Section 6 reveals that the protection scheme is efficiently working.
Shankarshan Prasad Tiwari,
Volume 20, Issue 1 (3-2024)
Abstract
In recent years, due to the widespread applications of DC power-based appliances, the researchers attention to the adoption of DC microgrids are continuously increasing. Nevertheless, protection of the DC microgrid is still a major challenge due to a number of protection issues, such as pole-to-ground and pole-to-pole faults, absence of a zero crossing signal, magnitude of the fault current during grid-connected and islanded mode, bidirectional behaviour of converters, and failure of the converters due to enormous electrical stress in the converter switches which are integrated in the microgrid. Failure of the converter switches can interrupt the charging of the electrical vehicles in the charging stations which can affect transportation facilities. In addition to the above mentioned issues protection of the DC microgrid is more challenging when fault parameters are varying due to dissimilar grounding conditions and varying operational dynamics of the renewable sources of energy. Motivated by the above challenges a support vector machine and ensemble of k-nearest neighbor based protection scheme has been proposed in this paper to accurately detect and classify faults under both of the modes of operation. Results in the section 5 indicate that performance of the protection scheme is greater as compared to other algorithms.