Showing 7 results for Renewable Energy
A. Hajizadeh,
Volume 9, Issue 1 (3-2013)
Abstract
This paper presents modeling and control of a hybrid distributed energy sources including photovoltaic (PV), fuel cell (FC) and battery energy storage (BES) in a microgrid which provides both real and reactive power to support an unbalanced utility grid. The overall configuration of the microgrid including dynamic models for the PV, FC, BES and its power electronic interfacing are briefly described. Then controller design methodologies for the power conditioning units to control the power flow from the hybrid power plant to the unbalanced utility grid are presented. In order to distribute the power between power sources, the neuro-fuzzy power controller has been developed. Simulation results are presented to demonstrate the effectiveness and capability of proposed control strategy.
P. Paliwal,
Volume 18, Issue 1 (3-2022)
Abstract
The determination of a suitable technology combination for an isolated micro-grid (IMG) based on hybrid renewable energy resources (HRES) is a challenging task. The intermittent behavior of RES leads to an adverse impact on system reliability and thus complicates the planning process. This paper proposes a two-fold approach to provide a suitably designed HRES-IMG. Firstly, a reliability-constrained formulation based on load index of reliability (LIR) is developed with an objective to achieve a minimum levelized cost of energy (LCOE). Multi-state modeling of HRES-IMG is carried out based on hardware availability of generating units and uncertainties due to meteorological conditions. Modeling of battery storage units is realized using a multi-state probabilistic battery storage model. Secondly, an efficient optimization technique using a decentralized multi-agent-based approach is applied for obtaining high-quality solutions. The butterfly-PSO is embodied in a multi-agent (MA) framework. The enhanced version, MA-BFPSO is used to determine optimum sizing and technology combinations. Three different technology combinations have been investigated. The combination complying with LIR criterion and least LCOE is chosen as the optimal technology mix. The optimization is carried out using classic PSO, BF-PSO, and, MA-BFPSO and obtained results are compared. Further, in order to add a dimension in system planning, the effect of uncertainty in load demand has also been analyzed. The study is conducted for an HRES-IMG situated in Jaisalmer, India. The technology combination comprising of solar, wind, and battery storage yields the least LCOE of 0.2051 $/kWh with a very low value of LIR (0.08%). A reduction in generator size by 53.8% and LCOE by 16.5% is obtained with MABFPSO in comparison with classic PSO. The results evidently demonstrate that MA-BFPSO offers better solutions as compared to PSO and BF-PSO.
A. O. Issa, A. I. Abdullateef, A. Sulaiman, A. Y. Issa, M. J. E. Salami, M. A. Onasanya ,
Volume 19, Issue 3 (9-2023)
Abstract
Grid-connected photovoltaic (PV) system is often needed whenever utilities fail to provide consumers with a reliable, sufficient and quality power supply. It provides more effective utilization of power, however, there are technical requirements to ensure the safety of the PV installation and utility grid reliability. In solar systems there is often excessive use of components, resulting in high installation costs. Consequently, appropriate measures must be taken to develop a cost-effective grid-connected PV system. An optimally sized PV system incorporated into an existing unreliable grid-connected commercial load for Mount Olive food processing is presented in this paper. The study focused on providing a reliable electricity supply which is cost-effective and environment-friendly. The techno-economic analysis of grid-connected PV/Diesel/Battery Storage systems was carried out using HOMER Pro software. Results showed that Grid/PV/BSS are technically, economically and environmentally feasible with the cost of energy at 0.136$/kWh and net present cost at $254,469. Also, the excess electricity produced by this combination is 13,264kWh/year, which generates income for the company by selling excess generated energy back to the grid if net metering were to be implemented. Furthermore, the CO2 emissions for these combinations decreased to 10,081.6 kg/year as compared to the existing systems (Grid/Diesel Generator) with emissions of 124,480 kg/year. This is an additional advantage in that it improves the greenhouse effect. A sensitivity analysis was carried out on the variation of load change, grid power price and schedule outages for the optimal system.
Jhanvi Gupta, Sanskar Jain, Suprava Chakraborty,
Volume 19, Issue 4 (12-2023)
Abstract
A powerhouse under development, India is slowly breaking free from its traditional methods of operations. It has been chosen for analysis as it offers a plethora of diverse cultures and a variety of indigenous groups of people. The energy sector of the country is transitioning to adopt policies that are in line with its sustainable goals. Focusing on peer-to-peer energy trading and the development of blockchain technologies, unconventional methods are slowly being incorporated with the help of various experimental projects. This is backed up by peer-to-peer trading of energy providing a prosumer with an autonomous environment. The paper looks into the ongoing trends in this sector and major reforms that are required to bring about the necessary shift. Challenges and their recommendations are also been discussed along with the need to implement them. Suitable conclusions have been drawn that aim towards favoring the P2P style of open-source electricity trading as the need for such an analysis is vital to achieve a decentralized energy system.
Saeed Hasanzadeh, Seyed Mohsen Salehi, Mohammad Javad Saadatmandfar,
Volume 20, Issue 3 (9-2024)
Abstract
Various forms of distributed generation (DG), such as photovoltaic (PV) systems, play a crucial role in advancing a more sustainable future, driven by economic factors and environmental policies implemented by governments. DC-DC converters are essential for harnessing power from solar cells, as they maintain a constant output voltage despite fluctuations in input voltage. Typically, step-up converters are employed to raise output voltage levels, though they often apply the same voltage to an active switch as the output voltage, which can be limiting. To effectively integrate distributed generation sources with the utility grid, high-voltage gain step-up converters are necessary since these sources typically operate at low voltage levels. This study presents an enhanced design of non-isolated DC-DC converters with high voltage gain tailored for photovoltaic (PV) applications. The proposed architecture achieves a quadratic increase in output voltage gain, which alleviates voltage stress on the active switch. Our converter design features a quadratic boost converter complemented by a voltage-boosting cell, facilitating significant voltage amplification. This topology benefits from employing an active switch while minimizing the number of inductors required, resulting in a more compact circuit design. Furthermore, the proposed architecture shares characteristics with recently published topologies regarding passive component utilization, voltage gain, and other relevant parameters. To validate our findings, we conducted mathematical analyses and simulations, with results corroborated by experimental data from laboratory prototype tests.
Mohamad Almas Prakasa, Mohamad Idam Fuadi, Muhammad Ruswandi Djalal, Imam Robandi, Dimas Fajar Uman Putra,
Volume 20, Issue 3 (9-2024)
Abstract
The unbalanced load distribution in the electrical distribution network caused crucial power losses. This condition occurs in one of the electrical distribution networks, 20 kV Tarahan Substation, Province of Bandar Lampung, Indonesia. This condition can be maintained using optimal reconfiguration with the integration of Distributed Generation (DG) based on Renewable Energy (RE). This study demonstrates the optimal reconfiguration of the 20 kV Tarahan Substation with the integration of the Photovoltaic (PV) and Battery Energy Storage System (BESS). The reconfiguration process is optimized by using the Firefly Algorithm (FA). This process is conducted in the 24-hour simulation with various load profiles. The optimal reconfiguration is investigated in two scenarios based on without and with DG integration. The optimal configuration with more balanced load distribution conducted by FA reduces the power losses by up to 31.39% and 32.38% in without and with DG integration, respectively. Besides that, the DG integration improves the lowest voltage bus in the electrical distribution network from 0.95 p.u to 0.97 p.u.
Siti Marwangi Mohamad Maharum, Muhammad Aliff Azim Hamzah, Muhammad Ridzwan Ahmad Yusri, Izanoordina Ahmad,
Volume 21, Issue 2 (6-2025)
Abstract
The Heating, Ventilation, and Air Conditioning (HVAC) system is commonly found in buildings such as industrial, commercial, residential, and institutional buildings. This HVAC system generates a significant speed of wind flow from its condenser unit. Surprisingly, this wind energy remains unexploited and thus dissipates into the surroundings. This project aims to leverage this unused wind energy from the condenser unit by developing an energy harvesting prototype that harnesses the HVAC system’s wind for a practical charging station. Specifically, a wind turbine is connected to a three-phase 12 VAC generator motor. This connection would efficiently convert wind energy into electrical power. An energy storage module is also incorporated to ensure uninterrupted functionality for the developed charging station prototype. The energy storage module has a substantial capacity of 25Ah, equivalent to a standard socket outlet. This ensures that the energy storage system can fully charge within three hours if there are no interruptions in the turbine's operation. An experimental validation was conducted by supplying different wind speeds to this project prototype, and it was observed that only when the wind speed is above 10 ms-1 does the energy storage system charge, and sockets provide a consistent output. The final output at the socket provided both 230VAC voltage and a USB charging option, making it versatile for users to charge commonly used electrical appliances such as smartphones and laptops. By repurposing this otherwise wasted wind energy, the developed system prototype contributes to cleaner and more sustainable energy utilization. It also converts unused energy into valuable, cleaner energy.
