B. Zakeri, H. Bernety,
Volume 10, Issue 4 (12-2014)
Abstract
Band-notch characteristic has been of great interest recently to overcome the electromagnetic interference of Ultra-wideband systems (UWB) with other existing ones. In this paper, we present a novel microstrip-fed antenna with band rejection property appropriate for UWB applications. Band-notch characteristic has been achieved by adding a rectangular resonant element to the ground section. A prototype was fabricated and measured based upon optimal parameters. Experimental results show consistency with simulation results. Measurement results confirm that the antenna covers the UWB band and satisfies a band rejection in the frequency span of 5 GHz to 5.7 GHz to restrain it from interference with Wireless Local Area Network (WLAN). Then, to achieve better isolation, a rectangular strip is appended to the band-notch creating part of the ground section to enhance obtained VSWR up to 30 through simulation. In addition, by applying a similar technique, a dual band-notched characteristic with an average simulated VSWR of around 13.75 has been achieved for WLAN and the downlink of X band satellite communication systems with each more than 10. Features such as small size, omnidirectional pattern and perfect isolation make the antenna suitable for any UWB applications.
Y. Zehforoosh, M. Sefidi,
Volume 13, Issue 2 (6-2017)
Abstract
In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN). The size of the antenna is 20×20×1.6 mm3. The experimental and simulated results of the prototyped antenna, including voltage standing wave ratio (VSWR), radiation pattern, and gain characteristics are presented and discussed. In addition, Analytical Hierarchy Process (AHP) method used for comparison the proposed antenna with previous designed structures.
