Volume 17, Issue 2 (June 2020)                   IJMSE 2020, 17(2): 8-15 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hasanzadeh R, Fathi S, Azdast T, Rostami M. Theoretical Investigation and Optimization of Radiation Thermal Conduction of Thermal-Insulation Polyolefin Foams. IJMSE 2020; 17 (2) :8-15
URL: http://ijmse.iust.ac.ir/article-1-1358-en.html
Abstract:   (11690 Views)
Heat transfer in foams consists of conduction through solid and gaseous phases, convection within the cells as well as radiation through the whole medium. Radiation thermal conduction affects the overall thermal conductivity by 40% in a high porosity. Therefore, the investigation of that term seems to be necessary. Radiation thermal conduction depends on the extinction coefficient which its determination is experimentally complex. In this study, this coefficient is theoretically estimated using Glicksman model for polyolefin foams and is verified in comparison with the experimental data. Extinction coefficient which plays an effective role in the radiation thermal conduction depends on the morphological properties including foam and solid densities, cell and strut diameters. The results demonstrate that the radiation thermal conduction decreases by reducing cell size and increasing foam density and strut diameter. An L25 orthogonal array of Taguchi approach is used for optimization of radiation thermal conduction respect to foam density, cell and strut diameters as variable parameters. The analysis of variance results illuminate that foam density and cell diameter with 58 and 32% contribution are the most effective parameters on the radiation thermal conduction, respectively. At optimum conditions according to the prediction tool of Taguchi approach, the radiation thermal conduction significantly decreases to 1.0908 mW/mK.
Full-Text [PDF 523 kb]   (6511 Downloads)    
Type of Study: Research Paper | Subject: Ceramics

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb